340 Airless Sprayer International

Get Titan 340 Airless Sprayer Replaceable Parts from AllTitanParts

Welcome to AllTitanParts, your one-stop shop for all the assembly parts you need for the Titan 340 Airless Sprayer. Our comprehensive collection of parts will help keep your 340 Airless Sprayer working at its peak performance for all your painting projects.

To make it easy to find the replaceable parts you need, we have divided the Titan Impact 340 Airless Sprayer into several categories, each with a specific set of assembly parts. Here are the categories we offer:

340 Main Assembly Parts

This category includes the whole sprayer and all the accessories you may need. All parts in this category are essential for properly functioning your sprayer.

Motor Assembly Parts

You can find capacitors and motor fans in this category. These parts are responsible for the smooth operation of your sprayer's motor. If you notice any issues with your sprayer's motor, this is the category to look for replacements.

Gear Box Assembly

This category includes 2nd Stage Gear and Thrust Washer, two crucial components of your sprayer's gear system. If you notice any grinding or clunking sounds coming from your sprayer, it's time to check your gear system and replace any worn-out parts.

Suction Set Assembly

Siphon hose and clips are essential parts of your sprayer's suction system, responsible for drawing paint from the container into the sprayer.

Stand Assembly

This category includes Leg Assembly and Cup Screws, which support your sprayer. Check and replace these parts if your sprayer's stand is unstable.

Fluid Section Assembly

This category includes pistons and transducers, essential components of your sprayer's fluid section.

We understand that finding the right parts for your Titan 340 Airless Sprayer can be daunting, so we have included a picture for each assembly with parts names labelled. This way, you can easily identify and confidently order the parts you need.

FAQs:

1. Where can I find replacement packing, pistons, or transducers for the Titan 340?

These are available in the Fluid Section Assembly category, which includes pistons, transducers, O-rings, and related internal parts. alltitanparts.com
Also, the Titan 340 International Owner’s Manual provides detailed instructions on servicing the fluid section.

2. How do I prevent static discharge and explosion when spraying flammable materials?

Connect to a grounded outlet and use grounded extension cords (for electric models).

Verify that all containers and collection systems are grounded.

Keep the spray area well ventilated, especially the floor area, as flammable vapors are often heavier than air.

Do not use plastic drop cloths or hang plastic to enclose the spray area, as plastic can cause static sparks.

3. What materials should NOT be used with the sprayer?

Do not use a 340 Airless Sprayer International paint or solvent containing halogenated hydrocarbons (such as chlorine, bleach, methylene chloride, and trichloroethane). These materials are not compatible with aluminum components in the pump.

4.What does the Suction Set Assembly include, and why might I need to replace it?

The Suction Set Assembly includes the siphon hose and clips, which draw paint from the container into the sprayer. Replacing it can restore reliable fluid intake if your sprayer is having trouble siphoning liquid.

5. What should I do if the sprayer is not priming (sucking up material)?

A common issue is debris causing the internal steel ball in the lower fluid section not to seat correctly. Clearing this lower fluid section often resolves the problem and allows the sprayer to prime.