Spray guns, tips, filters, seals and hoses are the wear parts of every airless sprayer. When the fan pattern narrows or grows tails, replace the spray tip. When paint drips or the gun spits, rebuild the gun with a repair kit or a new tip seal. When pressure drops or the tip keeps clogging, change the manifold filter and inlet screen. Genuine Titan parts keep the original fit, thread and pressure rating.
Genuine Titan airless guns, tips and accessories
This is where you restock everything between the pump and the wall: Titan RX-80, RX-Pro, RX-APEX, S-series and LX airless spray guns, TR1, TR1 HEA and SC-6+ spray tips, line-striping tips, tip guards, 3300–7500 PSI airless hoses, and the manifold filters, gun filters, inlet screens and seals that protect your pump. Every part is genuine Titan OEM, listed by its Titan part number so you can match it to your parts diagram and reorder the same item every time.
Shop by accessory type
RX-80, RX-Pro & RX-APEX guns
Contractor guns for Titan airless sprayers. The RX-80 is our best-selling gun family and is rated to 3600 PSI. The RX-Pro is light and has a 360° swivel, and the RX-APEX is rated to 5000 PSI with a one-touch trigger lock.
Popular: RX-80, RX-Pro with 517 TR1, RX-APEX non-filtered
Shop Red Series guns →TR1, TR1 HEA & SC-6+ tips
Reversible tips in every common size, from .009 fine-finish to large orifices for block filler. HEA tips spray at lower pressure with a softer pattern and less overspray.
Ranges: TR1 reversible, TR1 HEA, SC-6+ reversible, SC-6+ fine finish, TR1 high pressure
Shop spray tips →Striping tips & guards
TR1 and TR2 striping tips sized for crisp line widths on PowrLiner machines. The TR1 419 fits the PowrLiner 2850, 3000, 3500, 4500 and 5500.
Ranges: TR1 line striping, TR2 line striping, tip guards
Shop striping tips →Manifold, gun & inlet filters
Our most reordered parts. The 730-067 60-mesh manifold filter is listed for the Impact 440, 540, 640, 840 and 1040, and the 710-046 inlet screen protects the pump inlet.
Types: manifold filters, threaded gun filters, inlet screens, in-line gun filters
Shop filters →Airless hoses & whips
High-pressure paint hoses from 3300 to 7500 PSI, flexible whip hoses for the gun end, and air and air-assisted hoses. Always match the hose rating to your sprayer's maximum pressure.
Popular: 316-505 50′ spray hose, 3300 PSI, 3600 PSI, 4500 PSI
Shop hoses →Tip seals, repair kits & GHT kits
Stop drips and spitting with a fresh 651-020 tip seal or a full RX-80 gun repair kit. Or start over with a complete gun, hose and tip kit.
Shop: Titan seals, gun, hose & tip kits, specialty and mastic guns
Shop GHT kits →Titan spray tip chart: which tip for which material?
A spray tip number has three digits. Double the first digit to get the fan width in inches, sprayed about 12 inches from the surface. The last two digits are the orifice size in thousandths of an inch. A 517 tip therefore sprays a 10-inch fan through a .017″ orifice. Choose the orifice for the material and the fan width for the surface: narrow fans suit trim and doors, wide fans suit walls and ceilings.
| Material | Typical orifice | Example tips | Filter mesh |
|---|---|---|---|
| Lacquers, stains, clear sealers | .009–.013 | 210, 311, 413 | 100 mesh (fine, yellow) |
| Enamels and oil-based trim paint | .013–.015 | 313, 415, 515 | 60–100 mesh |
| Interior and exterior latex | .015–.019 | 515, 517, 619 | 60 mesh (medium, white) |
| Primers and heavy latex | .017–.021 | 519, 621 | 30–60 mesh |
| Elastomerics and block filler | .023–.035 | 625, 631, 635 | 30 mesh (coarse, green) or none |
Always check the largest tip your sprayer supports: bigger orifices need more GPM. For a step-by-step guide, read how to choose the correct airless spray tip size.
Which Titan spray gun should you choose?
| Gun | Best for | What stands out | Parts list |
|---|---|---|---|
| RX-80 | Everyday contractor spraying | Rated to 3600 PSI; the most-ordered gun family on AllTitanParts | RX-80 parts |
| RX-Pro | All-day use where comfort matters | Lightweight balanced body, smooth trigger, 360° swivel | RX-Pro parts |
| RX-APEX | High-pressure work and heavier coatings | Rated to 5000 PSI, one-touch trigger lock, non-filtered option | RX-APEX parts |
| S-3 / S-7 | Classic Titan S-series users | Long-running designs with full parts support | S-3 parts, S-7 parts |
| LX-80 II | Pro painters who want a compact gun | Compact professional airless gun | LX-80 II |
Looking for HVLP guns? The Maxum II and Maxum Elite guns are listed under Maxum series guns.
Wear parts to keep in your truck
- Two spare tips in your most-used sizes. A worn tip wastes paint and leaves stripes long before it looks damaged.
- A tip seal pack. The 661-020 tip seat and seal kit (5 pack) stops leaks around the tip.
- Gun filters and a manifold filter in the right mesh for your material, so a clog never ends the day.
- A gun repair kit for your gun model, to stop drips when the needle and seat wear.
- A tip guard that matches your gun thread. Never spray without one.