Titan 0538020 RX-Pro Airless Spray Gun, 517 TR1 Tip
Bring comfort and control to your painting projects with the Titan 0538020 RX-Pro Airless Spray Gun, 517 TR1 Tip. Featuring FingerPrint Grip, an ultra-light trigger, and onboard tools, this professional gun supports compatible airless setups. Match the supplied tip, hose connections, and system pressure ratings.
Selection Note: The gun is rated to 3,600 PSI. Observe the lowest pressure rating of every connected component and confirm the exact tip package supplied.
Comfortable Handling with Titan 0538020 RX-Pro Airless Spray Gun, 517 TR1 Tip
Choose an operator interface suited to the work ahead. The Titan 0538020 RX-Pro Airless Spray Gun, 517 TR1 Tip combines an ergonomic grip with practical service features for professional painting. Match the gun, tip, guard, and hose to your sprayer and coating requirements before assembling the system.
Built Around the Painter’s Hand
Grip selection: The FingerPrint Grip system offers size options so the operator can choose a suitable fit.
Trigger choice: Two- and four-finger configurations provide options for operator preference.
Service access: Onboard tools and the Infinity Packing service arrangement support routine gun maintenance when used according to Titan’s instructions.
Match the 517 Tip to the Job
Check the coating’s recommended orifice size and the pump’s supported tip capacity. Choose filtration suitable for the material and tip, and confirm the guard and seal arrangement.
A worn tip can change the spray pattern and material demand. Inspect the tip before attributing an uneven finish to the gun itself.
Setup, Cleaning & Inspection
1. Verify the system. Confirm approved connections and adequate working-pressure ratings for the pump, gun, hose, fittings, guard, and tip.
2. Follow the manuals. Use the prescribed setup, grounding, trigger-lock, and pressure-relief procedures.
3. Inspect before use. Check hose condition, connection security, trigger-lock operation, and leakage.
4. Maintain the gun. Flush with an approved compatible cleaning fluid and service the filter, tip, and internal components as directed.
5. Relieve pressure before service. Never clear a tip or open the gun while pressurized. Keep the specified guard installed and never check a leak with your hand.
Order Titan 0538020 RX-Pro Airless Spray Gun, 517 TR1 Tip
Choose the Titan RX-Pro from AllTitanParts after confirming the supplied tip configuration and your equipment requirements. For assistance, provide the sprayer model, maximum pressure, hose connection, and intended coating.
Frequently Asked Questions
Helpful answers about gun selection and tip compatibility.
What is Titan 0538020?
It is the RX-Pro airless gun-with-tip offering. This listing describes the requested 517 TR1 configuration.
What is the gun’s pressure rating?
The RX-Pro is rated to 3,600 PSI. The complete spraying system must remain within its lowest component rating.
What does 517 identify?
For the standard TR1 tip, it identifies a 0.017-inch orifice in Titan’s nominal 10–12-inch fan-width range. Actual results depend on application conditions.
Is a hose included?
Titan separately identifies 0538022 as a gun, hose, and tip kit. Do not assume that 0538020 includes a hose.
Which machines have documented accessory listings?
The cited Titan manuals list 0538020 for Elite 3000, Elite 4500, and Impact 1040T. These are documented examples; verify the complete setup for any machine.
Is the supplied tip always the same family?
Titan publications have used TR1 and HEA descriptions for this ordering number. Confirm the current boxed tip family if the exact configuration matters to your job.
Will a replacement gun fix an uneven pattern?
Only if the fault is in the gun. Check the tip, filters, material preparation, pressure, hose, and pump performance before choosing replacement parts.
