Titan 2454979 RX-80 Airless Spray Gun
Bring comfort and control to your next painting project with the Titan 2454979 RX-80 Airless Spray Gun kit. Featuring an ergonomic Comfort Grip and onboard tools, this gun-and-hose package supports compatible airless spraying setups. Match the connections, tip requirements, and component pressure ratings before ordering.
Pressure Note: The gun is rated to 3,600 PSI; the listed main hose is rated to 3,300 PSI. Observe the lowest working-pressure rating of every connected component.
Comfortable Handling with Titan 2454979 RX-80 Airless Spray Gun
Choose a spraying setup that suits your equipment and the work ahead. The Titan 2454979 RX-80 Airless Spray Gun is identified by Titan as a gun, hose, and tip kit. The RX-80 combines an ergonomic Comfort Grip with practical service features for everyday use. Confirm the supplied configuration, connections, coating requirements, and pressure ratings when matching this package to your sprayer.
Titan 2454979 Package & Configuration Details
Titan identifies this ordering number within its RX-80 gun, hose, and tip range. Its kit page lists an RX-80 gun, a 517 tip, and a 50-foot x 1/4-inch main hose rated to 3,300 PSI.
Catalog references also describe a four-finger kit with an additional 3-foot whip hose and two-finger trigger. Confirm the current boxed contents and exact tip family before ordering, particularly where listings distinguish TR1, HEA, and SC-6+ packages.
How to Match This Kit to Your Sprayer
Check the connections: Match the hose ends, gun inlet, and pump outlet using the approved fittings.
Check pressure capability: Ensure the pump and every accessory form an approved combination. Turning down a higher-pressure pump does not, by itself, establish accessory compatibility.
Check the tip: Match its size to the coating requirements and the sprayer’s maximum supported tip.
Check the application: Do not assume this handheld gun substitutes for an air-assisted, electrostatic, automatic striping, or specialized high-pressure gun.
Inspection, Cleaning & Service
Follow the gun and sprayer manuals for pressure relief, flushing, filter cleaning, and tip maintenance. Inspect the hose and connections before each use.
If the gun leaks, spits, or fails to shut off correctly, stop and diagnose the fault before further spraying. A blocked filter or worn tip may require attention independently of the gun’s internal components.
Keep the specified tip guard installed. Never check a pressurized leak with your hand, and never service the gun or clear a tip while the system remains pressurized.
Order Titan 2454979 RX-80 Airless Spray Gun
Choose the Titan 2454979 RX-80 kit from AllTitanParts after confirming the package and equipment requirements. For assistance, provide your sprayer model, maximum pressure, hose connections, and intended coating.
Frequently Asked Questions
Helpful answers about kit selection and airless-system compatibility.
Is 2454979 a gun-only part number?
Titan lists 2454979 within its RX-80 gun, hose, and tip kits. Confirm the current package contents when purchasing.
Can the complete kit operate at 3,600 PSI?
The gun carries that rating, but Titan lists a 3,300 PSI main hose. Never exceed the lowest working-pressure rating in the assembled system.
Which machines use the RX-80?
Titan documents RX-80 configurations for Impact X 410 and Impact X 440. Other machines require an individual check of manufacturer approval, connections, pressure ratings, and tip requirements.
Will it work with every brand of airless sprayer?
A brand name or matching pressure alone does not establish compatibility. Verify the complete gun, hose, fitting, tip, coating, and pump arrangement.
What tip comes with the kit?
Titan’s kit page lists a 517 tip. Confirm the exact tip family supplied with the current 2454979 package before ordering.
Does a new gun fix an uneven spray pattern?
Only when the gun is responsible for the fault. Check tip wear, filtration, coating preparation, pressure, and pump performance before selecting replacement parts.