Titan Air-Powered Airless Sprayer Parts · PowrCoat 730
Find Diagram-Matched PowrCoat 730 Wall-Mount Assembly Parts
Shop verified components for the PowrCoat 730 Wall Mount Assembly, including mounting hardware, eye hook, pneumatic tubing and fittings, shutoff valve, support bracket, pressure gauge, FRL assembly, protective shrouds, connecting hardware, fluid pump, 50-mesh filter, bleed valve, return fitting, and shield hardware. Match model 0533730W, diagram position, and exact Titan part number before ordering.
How the PowrCoat 730 Wall-Mount Assembly Is Organized
This exploded replacement-parts category covers the fixed-wall PowrCoat 730 configuration, model 0533730W. Titan specifies a 30:1 pressure ratio, 3,000 PSI maximum operating pressure, 100 PSI maximum air inlet pressure, and a wall-model weight of 92 pounds.
The diagram groups the wall weldment and fasteners, 0533211A air motor, 0533224A eye hook, pneumatic tubing and control fittings, 0533124A filter-regulator-lubricator assembly, right and left shrouds, support bracket and stanchions, 185-551A fluid pump, 0533218A filter assembly, 944-028A bleed valve, return fitting, swivel adapter, and protective shields.
Functions Supported by the Assembly
- Secures the system to its fixed wall-mount structure.
- Supports and protects the pneumatic motor and control hardware.
- Filters, regulates, and lubricates incoming compressed air.
- Develops coating pressure through the fluid pump assembly.
- Filters coating and provides a controlled pressure-relief path.
When Technicians Use This Parts Diagram
- Loose, bent, corroded, or misaligned wall-mount hardware.
- Air-pressure instability, tubing leaks, or FRL service problems.
- Damaged protective shrouds or missing shield hardware.
- Fluid-pump leakage, reduced output, or linkage wear.
- Filter restriction or bleed-valve pressure-relief problems.
Common PowrCoat 730 Wall-Mount Assembly Symptoms
Relieve gun and hose pressure, engage the gun safety, and vent the air supply before inspection. Diagnose connected fasteners, fittings, tubing, hoses, and operating conditions before replacing an assembly.
High-Value PowrCoat 730 Wall-Mount Parts
These verified product pages cover important structural, air-preparation, pumping, filtration, pressure-relief, and service-handling positions shown on the supplied page.
Titan 0533224A Eye Hook Assembly
Provides the documented lifting-eye position above the PowrCoat 730 air motor for controlled service handling.
Titan 0533239A Wall-Mount Bracket
Supports and aligns the pneumatic control hardware on the PowrCoat 730 wall-mount configuration.
Titan 0533124A FRL Service Assembly
Combines filtration, pressure regulation, and lubrication functions for the air-powered system.
Titan 185-551A Pump Assembly
The documented PowrCoat 730 fluid pump assembly used to develop and move coating material under pressure.
Titan 0533218A Filter Assembly
Provides the documented 50-mesh high-pressure filtration position for the PowrCoat 730 coating stream.
Titan 944-028A Bleed Valve Assembly
Provides the documented pressure-relief and return-flow control position connected to the filter assembly.
How to Order the Correct Wall-Mount Component
Identify the system area
Locate the fault in the mounting, pneumatic, protective, linkage, pump, filter, or bleed section.
Confirm model 0533730W
Do not select from the cart configuration or another PowrCoat model column.
Match the exact callout
Use the official diagram position and exact Titan part number.
Inspect adjoining parts
Check fasteners, fittings, washers, tubing, brackets, and mating surfaces together.
Maintenance Practices for Wall-Mounted PowrCoat 730 Systems
- Inspect the wall structure, weldment, bracket, screws, washers, and nuts regularly.
- Drain and service the air-preparation system according to operating conditions.
- Check pneumatic tubing and press-to-lock fittings for abrasion and leaks.
- Keep protective shrouds and shields securely installed.
- Inspect pump linkage and mounting hardware before continued operation.
- Clean the high-pressure filter and verify bleed-valve operation during service.
Build a Complete PowrCoat 730 Wall-Mount Repair
Structural service should include the wall weldment, 862-472 screws, 0509285 washers, 9885571 plugs, 862-410 nuts, 0533224A eye hook, 0533239 bracket, 9822113 washers, and associated screws. A new bracket cannot correct an unsuitable wall structure or damaged weldment.
Functional service should group the FRL, pneumatic tubing and fittings, pressure gauge, shutoff and bleed valves, air motor, connecting rod and coupling nut, pump assembly, filter assembly, return fitting, swivel adapter, shrouds, and shields according to the diagnosed system.
Shop Major PowrCoat 730 Wall-Mount Components
PowrCoat 730 Wall-Mount Assembly FAQs
Contractor-focused answers for wall-mount identification, diagnosis, safety, and replacement planning.