Titan 0533218A Filter assy,mesh
The Titan 0533218A Filter Assembly, 50 Mesh provides dependable high-pressure material filtration for compatible PowrCoat sprayers, helping contractors capture debris, protect downstream spray components and maintain consistent coating flow during demanding architectural and industrial applications.
Compatibility Table
| Brand | Accurate Compatible Titan Machine(s) | Part Number | Parts / Assemblies Serviced With | Technical / Commercial Detail |
|---|---|---|---|---|
| Titan | PowrCoat 730 — 0533730C, 0533730W | 0533218A | 0290423A cap, 920-004 element, 920-006 and 920-070 gaskets, 0290424A body, 944-028A bleed valve | 50-mesh, 18-in² filtration area; supports latex and standard architectural coatings; rated for the applicable 5000-PSI filter configuration. |
| Titan | PowrCoat 745 — 0533745C, 0533745W | |||
| Titan | PowrCoat 940 — 0533940C, 0533940W |
Prevent Costly Downtime with Titan 0533218A Filter Assembly Upgrades
Keep compatible PowrCoat systems productive with the 0533218A, a packaged 50-mesh high-pressure filter assembly that captures coating debris, supports dependable fluid delivery and helps protect downstream spray components during demanding professional applications.
| Technical Category | Product and Application Details |
|---|---|
| Product Overview | Packaged Titan high-pressure fluid filter assembly supplied with a 50-mesh filtration configuration for selected PowrCoat air-powered coating systems. |
| Function | Filters pressurized coating material before it enters downstream hose, gun and spray-tip components, helping reduce debris-related restrictions and maintain steadier fluid delivery. |
| Industrial Applications | Suitable for commercial painting, structural steel finishing, industrial maintenance, equipment refinishing, protective coating work and other high-output applications performed with compatible PowrCoat sprayers. |
| Accurate Compatible Titan Machines | Titan PowrCoat 730, PowrCoat 745 and PowrCoat 940 air-powered sprayers, including the corresponding cart and wall-mount configurations. PowrCoat 960 and PowrCoat 975 machines use filter assembly 0533223A and are not compatible with this assembly. |
| Accurate Part Number | Titan 0533218A — filter assembly, 50 mesh, packaged. |
| Compatible Parts & Assemblies | Works within the PowrCoat high-pressure fluid circuit and incorporates a filter-cap assembly, filter element with internal ball, filter body, thin PTFE gasket and thick PTFE gasket. |
| Related Parts Commonly Serviced Together | Related fluid-connection components include Titan 191-444 nipple, Titan 200-555 adapter, Titan 944-028A bleed-valve assembly and Titan 9885639 return-tube fitting. Filter elements and PTFE gaskets should also be inspected during service. |
| Common Problems Solved | Helps correct inadequate filtration caused by a damaged housing, compromised sealing surfaces or an unserviceable assembly. Proper filtration can reduce poor spray patterns, recurring tip blockages and debris reaching downstream components. |
| Use with Coating Systems | Designed for compatible professional airless systems applying architectural, industrial and protective coatings. Confirm that the coating, spray-tip size and filtration level are appropriate for the complete spray setup. |
| OEM & Brand Information | Genuine Titan replacement component engineered for the specified PowrCoat equipment configurations, preserving the intended fit, sealing arrangement and high-pressure fluid routing. |
| Commercial Benefits | Supports cleaner material flow, fewer filtration-related interruptions, improved downstream protection and more predictable jobsite productivity. Replacing a damaged assembly can be more economical than repeatedly stopping production to clear contaminated hoses, guns or tips. |
Dirty or clogged filters can reduce filtration performance and contribute to poor spray patterns or blocked tips. Depressurize the sprayer before service, clean the filter body and element with an appropriate solvent, and inspect the ball, PTFE gaskets and sealing surfaces for cuts, deformation, scratches or hardened coating before reassembly.
FAQ Section
Review these contractor-focused answers to confirm compatibility and support reliable filter maintenance.
| Contractor Questions and Answers |
|---|
Which Titan machines accept this 50-mesh filter assembly?It fits PowrCoat 730, PowrCoat 745 and PowrCoat 940 cart and wall-mount configurations. It should not be ordered for PowrCoat 960 or 975 systems, which use part 0533223A. |
How does this assembly help prevent jobsite downtime?Its 50-mesh element captures debris before it travels into downstream components, helping reduce spray-tip blockages, contaminated fluid delivery and repeated production interruptions. |
When should contractors replace the complete filter assembly?Replace it when the filter body, cap, threads or sealing surfaces are cracked, distorted, deeply scratched or unable to seal correctly. A dirty but undamaged element may be cleaned separately. |
What should be inspected during routine filter maintenance?Inspect the filter element, internal ball, filter body, cap and both PTFE gaskets. Pressure cuts, scratches, nicks or gasket deformation can prevent reliable sealing and require component replacement. |
Can this assembly be used with every coating material?Material suitability depends on coating viscosity, formulation, spray-tip size and manufacturer recommendations. Contractors should confirm that 50-mesh filtration is appropriate for the coating and complete spray configuration. |
No reviews yet. Be the first to review this product!
