Powrtwin 4900 Hydraulic Motor Parts
It is extremely essential to find the authentic PowrTwin 4900 hydraulic motor parts. It is crucial because you can only work perfectly and get great results when all the parts are working together in the right way. Also, if you do not find authentic parts, you are going to end up damaging your sprayer to a great extent
Below, we are going to mention the parts and their functioning so you can find the accurate one according to your sprayer.
Hydraulic Service Motor Kit
The hydraulic service motor kit is essential in converting the hydraulic pressure to the physical force that drives the paint piston.
Motor Tube Kit
The motor tube kit is the outer shell that contains the hydraulic cylinder.
Elbow/Tee/Adapter Fitting
The elbow, Tee, and adapter fitting are different threaded fittings that are used to connect the components together.
Pressure Hose Assembly Kit
The pressure hose assembly kit is a flexible hose that transfers the hydraulic fluid.
Trip Retainer
The trip spring stores and releases the energy to shift the spool valve
O-Ring Synthetic Rubber/O-Ring
The O-ring, a synthetic rubber, is used as a static or dynamic seal to prevent leakage.
Cylinder Head
To seal the top of the hydraulic cylinder the cylinder head is used.
Spool Valve with Sleeve
It is the directional control wall for the hydraulic motor and is used to alternate the high-pressure.
Piston
The piston is the main moving part within the hydraulic cylinder and is used to drive the paint pump.
Valve Rod Assembly
The valve rod assembly is used to mechanically trigger the reversal of the spool valve mentioned above
Piston Rod
The piston rod is a rigid shaft that is connected to a hydraulic piston on one end and the paint pump on the other.
Ball Valve/Ball
The ball valve’s main function is to control the spray function.
Lock Ring/Retainer ring/Piston retainer screw/Flex lock nut
The function of the lock ring, retainer ring, piston retainer screw, and flex lock nut is to hold the internal moving components.
Motor Tube Kit
The motor tube kit is the outer shell. It has a hydraulic cylinder, and it seals the pressurized fluid.
FAQs
How often should we work on the maintenance of our sprayer parts?
You should try to clean the parts every day after using them to keep them in the best condition.
Is there any other place where I can find original OEM replacement parts?
No, you will only find authentic sprayer parts on our website at AllTitanParts.
How can I easily maintain the sprayer parts without damaging them?
There is a proper maintenance guide provided on our website that you can go through to make sure everything is properly maintained.