PowrTwin 4900 Bleed Hose Assembly with Valve Parts

PowrTwin 4900 Bleed Hose Assembly with Valve Parts

Welcome to our specialised category for bleed hose assemblies with integrated valve and related replacement parts, engineered for the Titan PowrTwin 4900 airless sprayer system. The bleed hose assembly with valve is a key component for proper safe operation: allowing you to purge fluid, relieve pressure, and maintain optimal prime. On this page you’ll find components such as the 944-040 Bleed Hose Kit, 944-030A Bleed Valve Assembly, 944-014 Elbow 1/4″ NPT, 500-515 Bleed Hose, and other fittings and sub-components that support the bleed system. 

Why this category matters

• Essential for safe operation: As described in the PowrTwin 4900 manual, before servicing or cleaning you must connect the bleed hose to a waste container and open the bleed valve to release pressure.
  
  
• Correct fit & function: The parts listed here are specifically designated for the PowrTwin 4900 model, ensuring correct hose diameter, valve rating and safe fluid path. For example, the bleed hose kit 944-040 and hose 500-515 are listed.
  
  
• Avoid downtime & damage: A malfunctioning bleed hose/valve assembly can lead to trapped pressure, fluid leakage, or inefficient flushing,  replacing worn components proactively avoids these job-site problems.
  
  
• Ease of maintenance: Whether you need the full kit (hose + valve) or simply a hose replacement or elbow fitting, this category gives you access to OEM-compatible options.
  
  

Key parts you’ll find

Here are some of the notable components in this category:

• Titan 944-040 Bleed Hose Kit — a complete kit including hose and valve assembly for the PowrTwin 4900.
  
  
• Titan 944-030A Bleed Valve Assembly — the valve unit component used in the bleed hose assembly system. 
• Titan 500-515 Bleed Hose — standalone bleed hose replacement for the system.
• Titan 944-014 Elbow, 1/4″ NPT — a fitting required for correct hose/valve orientation.
• Additional fittings and hardware associated with the bleed hose and valve system for the PowrTwin 4900.
  
  

Maintenance & usage tips

• Always attach the bleed hose to a waste container: When flushing or purging, the manual instructs to place the bleed hose into a metal waste container before opening the valve.
  
  
• Inspect for hose damage: Check for kinks, cracks, or wear in the bleed hose (e.g., the 500-515) as small breaches can affect pressure release and system safety.
  
  
• Ensure fittings are correctly tight: Components like the 944-014 elbow must be properly installed to prevent leaks or misrouting of fluid.
  
  
• Replace worn valve assembly parts: If the bleed valve handle is loose or the valve won’t hold pressure, replace the assembly (944-030A) rather than trying a makeshift repair.
  
  
• Follow correct sequence on startup/shutdown: Turn down pressure, shut off hydraulic/pump system, hose to waste, then open bleed valve,  as per the PowrTwin 4900 instructions.
  
  

FAQs 

Q1: What is a bleed hose assembly with valve for the PowrTwin 4900?

The bleed hose assembly with valve for the PowrTwin 4900 is a combined component that includes the fluid-bleed hose and the pressure-release bleed valve. It allows operators to safely flush the system, relieve pressure, and purge air or residual coating from the sprayer before service or shutdown.

Q2: How do I choose the correct bleed hose assembly with valve for my PowrTwin 4900?

To choose the correct bleed hose assembly with valve for your PowrTwin 4900, check your model’s parts list or manual for items such as 944-040 (Bleed Hose Kit), 944-030A (Bleed Valve Assembly) and 500-515 (Bleed Hose). Confirm the part number and ensure it is listed as “Fits: PowrTwin 4900”.

Q3: How often should I replace the bleed hose or valve on my PowrTwin 4900?

You should inspect the bleed hose and valve regularly,  ideally every major service interval or when you encounter issues like slow pressure drop, lingering pressure after shutdown, or visible wear on the hose. If there are cracks, kinks, or the valve is damaged, replace the part immediately.

Q4: Can I use just the hose without the valve, or vice versa, with the PowrTwin 4900?

Yes, depending on what part is worn you may replace just the hose (e.g., 500-515) or just the valve assembly (944-030A). If both are functioning correctly you need not replace the full kit (944-040). But ensure compatibility and correct installation.

Q5: Why is it important to use genuine Titan bleed hose assembly with valve parts on the PowrTwin 4900?

Using genuine Titan parts ensures correct pressure rating, hose diameter, valve sealing and overall safety on your PowrTwin 4900. Non-OEM replacements may not perform correctly under the high-pressure conditions of an airless sprayer, risking leaks, failure or damage.