Titan part 944-014 is a 1/4" NPT elbow fitting used in fluid or air line connections on compatible Titan PowrTwin sprayers / stripers. The 90‑degree elbow allows tubing or hose to change direction in tight spaces, reducing stress on lines and simplifying routing. Made from corrosion‑resistant material for long service life.
| Part Number | 944-014 |
|---|---|
| Part Description | Elbow, 1/4" NPT |
| Brand | Titan |
| Fits |
PowrTwin 4900, 6900, 8900, 12000 Plus, 4900XLT, 6900XLT, TM 8900XLT |
| Condition | New |
The Titan 944-014 1/4" NPT Elbow is a 90‑degree brass or plated steel fitting used to connect fluid hoses, pump outlet lines, or air tubes on PowrTwin series equipment. Its compact design allows tubing to change direction without kinking or excessive bending, which reduces stress on connections and prevents leaks.
Over time, elbows can crack, corrode, or have damaged threads from overtightening or vibration. A leaking or restricted elbow can cause pressure drops, material waste, or unsafe spraying conditions. Replacing a worn elbow restores leak‑free operation and proper flow.
| Direction change | Provides a 90° turn for hoses or rigid lines |
|---|---|
| Space saving | Allows routing in tight compartments without sharp bends |
| Threaded connection | Standard 1/4" NPT male/female threads for secure attachment |
| Durable material | Brass or zinc‑plated steel resists corrosion and fatigue |
| Visible cracks | Casting or body cracks, especially near the hex flats |
|---|---|
| Thread damage | Stripped, cross‑threaded, or corroded threads that won't seal |
| Persistent leakage | Fluid seeps from the fitting even after retightening with sealant |
| Internal restriction | Reduced flow due to scale buildup or deformation |
Titan 944-014 is compatible with the following Titan PowrTwin models. Always verify that the elbow is used in the correct port location per your machine's parts diagram.
| Brand / Model | Component |
|---|---|
| PowrTwin 4900 | 1/4" NPT elbow |
| PowrTwin 6900 | 1/4" NPT elbow |
| PowrTwin 8900 | 1/4" NPT elbow |
| PowrTwin 12000 Plus | 1/4" NPT elbow |
| PowrTwin 4900XLT | 1/4" NPT elbow |
| PowrTwin 6900XLT | 1/4" NPT elbow |
| PowrTwin TM 8900XLT | 1/4" NPT elbow |
When replacing an elbow fitting, inspect these associated components to ensure a complete and leak‑free repair.
Use a high‑quality anaerobic sealant on NPT threads; avoid Teflon tape that can shred.
If the elbow was leaking, the attached hose may also be worn or cracked.
If threads are damaged in the mating port, you may need a repair fitting or new component.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
