Part number 700-499 is an O-ring used to create a leak-proof seal between components in compatible sprayer systems. This flexible ring prevents fluid or air from escaping at joints and fittings. Replacing a worn or damaged O-ring restores proper sealing and prevents leaks.
| Part Number | 700-499 |
|---|---|
| Part Description | O-Ring |
| Fits | Elite E15; Elite G40; Epic 447ex; Epic 447HPX; Epic 660ex; Epic 660HPX; Epic 690 GX; Epic 1200 HPG; PowrLiner 4955, 6955, 8955; PowrLiner 3100; PowrLiner 4000; PowrLiner 4900 XLT; PowrLiner 4900; PowrLiner 4950; PowrLiner 5000; PowrLiner 6000; PowrLiner 6900 XLT SP; PowrLiner 6900 XLT; PowrLiner 6950; PowrLiner 6950_1; PowrLiner 8900 XLT SP; PowrLiner 8900 XLT; PowrLiner 8900; PowrTex 6900SF, 12000SV 0528919D; PowrTex 6900SF, 12000SV; PowrTwin 3500 50th anniversary; PowrTwin 4900 , 6900 , 8900, 12000 Plus; PowrTwin 4900 XLT; PowrTwin 4900GH; PowrTwin 6900 , 12000 Plus DI; PowrTwin 6900 XLT DI; PowrTwin 6900 XLT; PowrTwin 6900GH; PowrTwin 8900GH; PowrTwin 12000 GHD; PowrTwin 12000 Plus DI service; PowrTwin 12000 XLT DI; PowrTwin 12000 XLT; PowrTwin 12000GH; PowrTwin 12000GHD; PowrTwin TM 8900 XLT |
| Condition | New |
The 700-499 O-ring is a precision-molded elastomeric seal used in various locations within a wide range of compatible sprayer systems. It is specifically designed for use with Elite E15; Elite G40; Epic 447ex; Epic 447HPX; Epic 660ex; Epic 660HPX; Epic 690 GX; Epic 1200 HPG; PowrLiner 4955, 6955, 8955; PowrLiner 3100; PowrLiner 4000; PowrLiner 4900 XLT; PowrLiner 4900; PowrLiner 4950; PowrLiner 5000; PowrLiner 6000; PowrLiner 6900 XLT SP; PowrLiner 6900 XLT; PowrLiner 6950; PowrLiner 6950_1; PowrLiner 8900 XLT SP; PowrLiner 8900 XLT; PowrLiner 8900; PowrTex 6900SF, 12000SV 0528919D; PowrTex 6900SF, 12000SV; PowrTwin 3500 50th anniversary; PowrTwin 4900 , 6900 , 8900, 12000 Plus; PowrTwin 4900 XLT; PowrTwin 4900GH; PowrTwin 6900 , 12000 Plus DI; PowrTwin 6900 XLT DI; PowrTwin 6900 XLT; PowrTwin 6900GH; PowrTwin 8900GH; PowrTwin 12000 GHD; PowrTwin 12000 Plus DI service; PowrTwin 12000 XLT DI; PowrTwin 12000 XLT; PowrTwin 12000GH; PowrTwin 12000GHD; and PowrTwin TM 8900 XLT models. O-rings are installed in grooves between mating parts, such as fluid passages, pump connections, or valve assemblies. When compressed during assembly, they deform to fill the gap, creating a reliable seal against fluid or air leakage. This O-ring is made from a material formulated to resist degradation from common solvents, paints, and cleaning agents. Over time, O-rings can become hard, brittle, or cracked due to chemical exposure, temperature cycles, or compression set. A damaged or worn O-ring will allow fluid or air to escape, leading to poor performance, dripping, or loss of pressure. Symptoms of a faulty O-ring include visible leaks at joints, difficulty building pressure, or air bubbles in the fluid. Replacing a worn O-ring with this genuine part restores a positive seal and prevents leaks. This simple, low-cost repair is essential for maintaining the efficiency and reliability of the sprayer. When replacing an O-ring, ensure the groove is clean and the new ring is properly lubricated if required.
| Fluid sealing | Prevents paint or solvent leaks |
|---|---|
| Air sealing | Prevents air loss in systems |
| Pressure retention | Helps maintain system pressure |
| Visible leakage | Fluid seeping from sealed joint |
|---|---|
| Hardening or cracking | O-ring material degraded |
| Compression set | O-ring flattened and no longer seals |
| Air bubbles in fluid | Air ingestion due to failed seal |
Part number 700-499 is compatible with the following sprayer models. Always verify using your equipment's serial number and parts manual.
| Series | Specific Models |
|---|---|
| Elite | E15, G40 |
| Epic | 447ex, 447HPX, 660ex, 660HPX, 690 GX, 1200 HPG |
| PowrLiner | 4955, 6955, 8955, 3100, 4000, 4900 XLT, 4900, 4950, 5000, 6000, 6900 XLT SP, 6900 XLT, 6950, 6950_1, 8900 XLT SP, 8900 XLT, 8900 |
| PowrTex | 6900SF/12000SV 0528919D, 6900SF/12000SV |
| PowrTwin | 3500 50th anniversary, 4900/6900/8900/12000 Plus, 4900 XLT, 4900GH, 6900/12000 Plus DI, 6900 XLT DI, 6900 XLT, 6900GH, 8900GH, 12000 GHD, 12000 Plus DI service, 12000 XLT DI, 12000 XLT, 12000GH, 12000GHD, TM 8900 XLT |
When replacing the O-ring, inspecting these associated components can help ensure a complete repair.
Check for scratches or burrs that could damage new O-ring.
If used, inspect for wear or damage.
Ensure groove is clean and undamaged.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
