Titan OEM Accessories | Hoses, Adapters and Maintenance Parts
Shop Titan Elite E15 Accessories and Replacement Parts
Find essential Titan Elite E15 Accessories at AllTitanParts, including genuine Titan swivel adapters, hose connectors, high-pressure airless hoses, whip hoses, piston lubricant and service components. Whether you need Titan 490-005 Swivel Adapter, Titan 316-513 Airless Hose or Titan 550-222 Whip Hose, compare OEM part numbers and technical specifications to select accessories for your airless spraying equipment. Explore available products and documented replacement part numbers to maintain your sprayer's fluid delivery system.
Accessories Overview
Buy Titan Elite E15 Airless Sprayer Accessories
The Titan Elite E15 Accessories category features manufacturer-identified accessories and service components for airless spraying equipment. These products support fluid connections, hose routing, spraying reach, pressure monitoring and selected maintenance operations.
Airless spray systems rely on properly rated hoses, secure fluid fittings and compatible connections to carry coating material under pressure. A damaged hose, incorrect adapter or unsuitable fitting can create performance problems and serious safety hazards. Choosing the correct component requires checking both its Titan part number and its operating specifications.
This category lists ten products, including swivel adapters, retaining nut adapters, hose-to-hose connectors, swivel unions, 25-foot airless hoses, 9-foot whip hoses, piston lubricant, pressure gauges and pusher stem assemblies.
Some catalog products are discontinued and have documented replacement numbers. These include Titan 690-375-50 Hose, Titan 730-394 Pressure Gauge and Titan 2334402 Pusher Stem Assembly. Always check the current replacement product's specifications and compatibility before purchasing.
Shop AllTitanParts by exact OEM part number to identify suitable accessories while avoiding unnecessary purchases and incorrect substitutions.
Accessories Product Directory
Titan Elite E15 Accessories Parts List
The following directory reflects the products listed in this category. This is an accessory catalog rather than a single exploded assembly, so diagram reference numbers are not assigned.
| Titan Part Number | Product Description | Accessory Type | Notes |
|---|---|---|---|
| 490-005 | Swivel Adapter | Fluid connection | Swivel connection accessory for a compatible installation. |
| 490-007 | Retaining Nut Adapter | Adapter hardware | Provides the specified retaining nut adapter connection. |
| 490-014 | Hose-to-Hose Adapter, 3/8 in Male x 3/8 in Male | Hose connector | Connects compatible female-ended hose fittings. |
| 490-032 | Swivel Union, 1/4 in Female x 3/8 in Male | Swivel fitting | Provides a specified swivel connection between compatible fittings. |
| 316-513 | Airless Hose, 25 ft x 1/4 in | Spray hose | Transfers coating material through a compatible airless system. |
| 550-222 | Whip Hose, 9 ft x 3/16 in | Whip hose | Shorter fluid hose with listed 1/4 in NPSM end connections. |
| 690-375-50 | Hose, 3/8 in x 50 ft | Spray hose | Discontinued. Listed replacement: Titan 291006. |
| 700-926 | Piston Lube, 1 Quart | Maintenance fluid | Lubrication product for approved sprayer maintenance. |
| 730-394 | 5000 PSI Pressure Gauge | Pressure monitoring | Discontinued. Listed replacement: Titan 508626. |
| 2334402 | Pusher Stem Assembly | Pump service component | Discontinued. Listed replacement: Titan 2402347. |
Product availability and manufacturer replacement references can change. Confirm current ordering status and compatibility on the individual product page.
Featured Titan Accessories
Shop Titan Elite E15 Hoses, Swivel Adapters and Service Parts
Titan 490-005 Swivel Adapter
The Titan 490-005 Swivel Adapter is a genuine Titan accessory used to provide a swivel connection in a compatible spraying setup.
Swivel fittings can help accommodate hose movement at an appropriate connection point. Confirm the adapter's threads, pressure rating and installation requirements before use.
OEM Part Number: 490-005Titan 490-007 Retaining Nut Adapter
The Titan 490-007 Retaining Nut Adapter is a manufacturer-specified adapter component for a compatible fluid system connection.
Use the exact part number to identify the correct replacement. Verify connection dimensions and installation requirements before ordering.
OEM Part Number: 490-007Titan 490-014 Hose-to-Hose Adapter
The Titan 490-014 Hose-to-Hose Adapter is listed with 3/8-inch male connections on both ends.
It provides a connection option for compatible female-ended hose fittings. Verify the thread standard, pressure rating and intended application before installation.
OEM Part Number: 490-014 | 3/8 in Male x 3/8 in MaleTitan 490-032 Swivel Union
The Titan 490-032 Swivel Union is listed with a 1/4-inch female connection and a 3/8-inch male connection.
It provides a swivel connection between appropriately matched fluid fittings. Confirm the thread type and system pressure requirements before purchasing.
OEM Part Number: 490-032 | 1/4 in Female x 3/8 in MaleTitan 316-513 Airless Hose
The Titan 316-513 Airless Hose is a genuine OEM hose listed with a 25-foot length and 1/4-inch diameter.
It supports fluid delivery in compatible airless spraying systems. Check the hose's maximum working pressure, fitting specifications and equipment requirements before installation.
OEM Part Number: 316-513 | 25 ft x 1/4 inTitan 550-222 Whip Hose
The Titan 550-222 Whip Hose is listed as a 9-foot, 3/16-inch hose with 1/4-inch NPSM end connections.
A whip hose provides a shorter hose section near the spray gun in compatible configurations. Check the product's working pressure and connection specifications before use.
OEM Part Number: 550-222 | 9 ft x 3/16 inTitan 690-375-50 Spray Hose
The Titan 690-375-50 Hose is a 3/8-inch by 50-foot spray hose previously listed for airless spraying applications.
This product is marked discontinued by the manufacturer. The catalog identifies Titan 291006 as its replacement.
Confirm the replacement hose's working pressure, connections and fitment before purchasing.
Discontinued Part: 690-375-50 | Replacement: 291006Titan 700-926 Piston Lube
The Titan 700-926 Piston Lube is a one-quart maintenance lubricant listed for selected Titan airless sprayer applications.
Use piston lubricant only where specified by the equipment manufacturer's service instructions. Correct lubrication practices can support maintenance of compatible piston and packing components.
OEM Part Number: 700-926 | 1 QuartTitan 730-394 Pressure Gauge
The Titan 730-394 Pressure Gauge is listed as a 5000 PSI gauge used for pressure monitoring in compatible fluid system installations.
This product is discontinued. The catalog identifies Titan 508626 as the replacement.
Verify the replacement gauge's pressure range, fittings and installation specifications before ordering.
Discontinued Part: 730-394 | Replacement: 508626Titan 2334402 Pusher Stem Assembly
The Titan 2334402 Pusher Stem Assembly is a pump service component listed in the accessories category.
The product is discontinued and is identified as replaced by Titan 2402347. The pusher stem assembly connects to the pump head in the applicable pump configuration.
Confirm pump model compatibility and the correct replacement procedure before purchasing.
Discontinued Part: 2334402 | Replacement: 2402347Accessory Functions
How Titan Elite E15 Accessories Support Airless Spraying
Fluid Connections
Adapters and unions connect compatible hose fittings and fluid system components.
Coating Delivery
Airless hoses carry pressurized coating material through the fluid delivery system.
Pressure Monitoring
Properly selected gauges provide fluid pressure readings for compatible equipment.
Equipment Servicing
Specified lubricants and pump service components support approved maintenance procedures.
Troubleshooting and Replacement
Common Titan Elite E15 Accessory Problems
Accessory-related problems may involve hoses, fittings, seals or other sprayer components. Diagnose the problem using the applicable Titan service manual before selecting replacement parts.
| Observed Problem | Components to Inspect | Recommended Check |
|---|---|---|
| Leakage at hose connection | 490-014, 490-032 and connected fittings | After complete pressure relief, inspect fitting compatibility, connection condition and sealing surfaces. |
| Damaged airless hose | 316-513, 550-222 and installed hoses | Inspect for cuts, abrasion, bulges and damaged fittings. Replace defective high-pressure hoses. |
| Hose twists during spraying | 490-005 and 490-032 swivel fittings | Check hose routing and determine whether a compatible swivel fitting is appropriate. |
| Restricted fluid flow | Hoses, fittings and other fluid system components | Inspect for blocked passages, damaged hoses and other fluid system restrictions. |
| Incorrect hose fitting size | 490-014 and 490-032 adapters | Confirm connection dimensions, thread type and pressure rating before installation. |
| Pressure gauge not functioning | 730-394 or documented replacement 508626 | Inspect gauge condition and verify the specified replacement requirements. |
| Pump service component requires replacement | 2334402 or documented replacement 2402347 | Confirm the exact pump model and follow the manufacturer's repair procedure. |
OEM Replacement References
Titan Elite E15 Accessories Replacement Part Numbers
The category identifies the following manufacturer replacement relationships:
- Titan 690-375-50 Hose is discontinued and listed as replaced by Titan 291006.
- Titan 730-394 5000 PSI Gauge is discontinued and listed as replaced by Titan 508626.
- Titan 2334402 Pusher Stem Assembly is discontinued and listed as replaced by Titan 2402347.
These replacement references help identify current ordering alternatives for discontinued catalog products. They do not establish that every replacement is compatible with every Titan Elite E15 configuration.
Always verify the current replacement product's dimensions, pressure rating, connection specifications and model compatibility before ordering.
Accessories Buying Guide
How to Choose the Correct Titan Elite E15 Accessories
Identify Your Equipment
Confirm your Titan Elite E15 configuration and the accessory or component being replaced.
Check Technical Specifications
Compare hose diameter, length, pressure rating, thread dimensions and connection types.
Match the OEM Part Number
Use the original Titan part number and verify any documented replacement reference.
Order the Correct Product
Check current availability and fitment before purchasing your accessory from AllTitanParts.
Preventive Maintenance
Maintain Your Titan Elite E15 Hoses, Fittings and Accessories
Inspect High-Pressure Hoses
Check hoses for cuts, abrasion, kinks, bulges, leaks and damaged fittings. Never repair a defective high-pressure hose with tape or patches.
Examine Hose Connections
Inspect adapters and unions for damaged threads, worn sealing surfaces and incorrect installation.
Prevent Hose Twisting
Route hoses according to manufacturer guidance and avoid excessive twisting, sharp bends and crushing.
Use Approved Lubricants
Use Titan Piston Lube only where specified in the applicable equipment maintenance instructions.
Inspect Pressure Gauges
Check gauges for damage, leakage and unreadable displays. Replace defective components with properly specified parts.
Store Accessories Properly
Clean and store accessories according to the manufacturer's instructions to reduce contamination, corrosion and physical damage.
Related Titan Parts Categories
Shop More Titan Sprayer Accessories and Replacement Parts
Titan Elite E15 Frame Parts
Find OEM frame plugs, flange screws and related frame hardware.
Titan Elite E15 Accessories
Review hoses, adapters, maintenance products and documented replacement references.
All Titan Sprayer Parts
Search the AllTitanParts catalog by exact OEM part number or equipment model.
Titan Elite E15 Accessory Safety
Before inspecting, disconnecting or replacing hoses, adapters, gauges or pump service components, shut down the sprayer, disconnect electrical power and follow Titan's complete pressure-relief procedure. Never loosen a pressurized fluid connection or attempt to stop a high-pressure leak with your hand. High-pressure fluid injection injuries require immediate emergency medical attention. Use only accessories with suitable pressure ratings and compatible fittings. Follow the applicable Titan operating and service manuals for installation, inspection and testing.
Titan Elite E15 Accessories and Service Parts
Order Titan Elite E15 Accessories Online
Shop Titan swivel adapters, hose connectors, airless hoses, whip hoses and maintenance products. Compare exact OEM part numbers and find documented replacements for discontinued components at AllTitanParts.
Shop Titan Elite E15 AccessoriesFrequently Asked Questions
Titan Elite E15 Accessories FAQ
What accessories are listed for the Titan Elite E15?
The category lists swivel adapters, retaining nut adapters, hose connectors, airless hoses, whip hoses, piston lubricant, pressure gauges and pusher stem assemblies.
How many products are in the Titan Elite E15 Accessories category?
AllTitanParts currently lists ten products in this category, including three discontinued products with documented replacement numbers.
What is Titan 490-005?
Titan 490-005 is a Swivel Adapter used for a compatible fluid connection. Verify its pressure rating and fitting specifications before installation.
What is Titan 490-014 used for?
Titan 490-014 is a hose-to-hose adapter listed with 3/8-inch male connections on both ends. Confirm the exact thread specification before use.
What are the connections on Titan 490-032 Swivel Union?
Titan 490-032 is listed with a 1/4-inch female connection and a 3/8-inch male connection. Verify the thread type and pressure rating before installation.
What are the dimensions of Titan 316-513 Airless Hose?
Titan 316-513 is listed as a 25-foot airless hose with a 1/4-inch diameter. Confirm its maximum working pressure and fitting specifications for your equipment.
What is the Titan 550-222 Whip Hose specification?
Titan 550-222 is listed as a 9-foot, 3/16-inch whip hose with 1/4-inch NPSM end connections. Verify its pressure rating before use.
What part replaces Titan 690-375-50 Hose?
Titan 690-375-50 is discontinued and the catalog lists Titan 291006 as its replacement. Check the current replacement hose specifications before ordering.
What part replaces Titan 730-394 Pressure Gauge?
Titan 730-394 is discontinued and the catalog lists Titan 508626 as its replacement. Verify the pressure range, connection and equipment compatibility.
What part replaces Titan 2334402 Pusher Stem Assembly?
Titan 2334402 is discontinued and listed as replaced by Titan 2402347. Confirm that the replacement is correct for your specific pump model.
What is Titan 700-926 Piston Lube?
Titan 700-926 is a one-quart piston lubricant. Use it only for equipment and service procedures specified by the manufacturer.
Can any Titan airless hose be used with the Elite E15?
No. Hoses must meet the sprayer's maximum working pressure requirements and have compatible fittings, dimensions and construction. Confirm compatibility before installation.
How do I identify the correct Titan Elite E15 accessory?
Check your sprayer model, existing accessory part number, operating pressure, connection specifications and the manufacturer's replacement information.
Where can I buy Titan Elite E15 Accessories?
Shop Titan Elite E15 Accessories at AllTitanParts. For help identifying the correct part, call 713-931-0006.
Titan OEM Parts Assistance
Need Help Finding Titan Elite E15 Accessories?
Have your sprayer model, existing OEM part number, hose dimensions, connection specifications and pressure requirements ready when requesting assistance.
713-931-0006