Genuine Titan OEM | Frame Hardware Replacement Parts
Shop Titan Elite E15 Frame Replacement Parts
Keep your Titan Elite E15 airless paint sprayer properly assembled with genuine Titan Elite E15 Frame Parts from AllTitanParts. Find factory-specified replacement hardware, including the Titan 0294635 Plug and Titan 761-178 Hexagonal Flange Screw. Whether you are replacing a missing frame plug or servicing a damaged fastening point, use the official Titan exploded parts diagram to identify the correct OEM component before ordering.
Frame Parts Overview
Buy Genuine Titan Elite E15 Frame Hardware and Replacement Parts
The Titan Elite E15 Frame category contains factory-identified hardware used in the frame-related assembly of the Titan Elite E15 airless sprayer. The frame provides structural support for the equipment, while specified hardware helps maintain the manufacturer's intended assembly configuration.
Frame components may be exposed to vibration, transportation, repeated handling and normal jobsite wear. Missing plugs, damaged fasteners or incorrectly installed hardware can affect component retention and the overall condition of the sprayer.
AllTitanParts currently lists two genuine Titan OEM products in this category: Titan 0294635 Plug and Titan 761-178 Hexagonal Flange Screw. Both products are identified by numbered positions in the factory parts diagram.
The Titan 0294635 Plug is a hardware component intended for its specified plug location. The Titan 761-178 Hexagonal Flange Screw is a threaded fastener used at its designated assembly position. These are separate replacement parts, not a complete frame replacement kit.
When servicing the Titan Elite E15, match the exact manufacturer part number and diagram reference. Using the specified OEM component helps avoid problems caused by incorrect hardware dimensions, incompatible fasteners or improperly fitted substitutes.
OEM Parts Directory
Titan Elite E15 Frame Parts List
The following replacement parts are listed under the Titan Elite E15 Frame exploded diagram. Use the diagram references to identify their locations before ordering.
| Diagram Ref. | Titan Part Number | OEM Description | Component Function |
|---|---|---|---|
| 157 | 0294635 | Titan Plug | Provides the specified plug or closure function at its designated frame assembly position. |
| 158 | 761-178 | Titan Hexagonal Flange Screw | Provides threaded fastening at the manufacturer's designated assembly location. |
This category contains two individually listed OEM hardware products. The complete frame structure and other associated components are not included in this two-product listing. Confirm required quantities using the factory diagram.
Featured Frame Hardware
Titan Elite E15 Frame Plugs and Fastening Screws
Diagram Reference 157
Titan 0294635 Plug
The Titan 0294635 Plug is a genuine Titan OEM hardware component listed for the Titan Elite E15 Frame.
A plug is used to close or cover its designated opening in an equipment assembly. Correct plug selection depends on the intended location, dimensions and manufacturer's specifications.
A missing or damaged plug should be inspected and replaced when required by the equipment's service instructions. Using an incorrect plug can result in an improper fit or incomplete assembly.
Before ordering, compare diagram reference 157 with the corresponding location on your Titan Elite E15.
Product: Plug
Diagram Reference: 157
Diagram Reference 158
Titan 761-178 Hexagonal Flange Screw
The Titan 761-178 Hexagonal Flange Screw is a genuine Titan replacement fastener listed for the Elite E15 Frame.
A hexagonal flange screw combines a hexagonal drive head with an integrated flange. This design provides a bearing surface beneath the head for the fastening application specified by the manufacturer.
Inspect existing screws for damaged threads, rounded heads, corrosion or missing hardware. Replace them with the exact specified fastener rather than assuming that a visually similar screw has the correct dimensions or mechanical properties.
Follow Titan's service instructions for installation and tightening requirements.
Product: Hexagonal Flange Screw
Diagram Reference: 158
Frame Assembly Function
How Titan Elite E15 Frame Hardware Supports the Sprayer
Structural Support
The frame supports the installed sprayer components according to the manufacturer's equipment design.
Component Fastening
Specified threaded hardware helps secure components at their designated assembly points.
Opening Protection
Properly installed plugs provide the intended closure or coverage at their specified locations.
Service Integrity
Correct replacement hardware helps maintain the factory assembly arrangement during repairs.
Frame Hardware Troubleshooting
Common Titan Elite E15 Frame Hardware Problems
Inspect the frame and its hardware for damage before ordering replacement parts. Not every frame-related problem can be corrected by replacing a plug or screw.
| Observed Problem | Component to Inspect | Recommended Check |
|---|---|---|
| Missing plug at designated location | Titan 0294635 Plug | Compare the opening with diagram reference 157 and confirm the correct OEM plug. |
| Damaged or loose frame fastener | Titan 761-178 Hexagonal Flange Screw | Inspect threads, the screw head and the mating attachment point. |
| Fastener will not tighten correctly | Screw and threaded connection | Check for stripped threads or an incorrect fastener. Do not force installation. |
| Plug does not remain seated | Plug and designated opening | Check for incorrect fit, deformation or damage at the mounting location. |
| Excessive vibration or movement | Frame, fasteners and mounting points | Inspect the entire assembly and identify the source of movement before replacing hardware. |
| Cracked or bent frame structure | Frame assembly | Stop using the equipment and obtain the correct structural repair guidance. A replacement screw or plug alone will not correct structural damage. |
OEM Part Identification
Titan Elite E15 Frame OEM Part Numbers and Diagram References
Use the following factory catalog information when identifying replacement hardware:
- Titan 0294635: Plug, diagram reference 157.
- Titan 761-178: Hexagonal Flange Screw, diagram reference 158.
These products are listed as genuine Titan OEM parts. Their exact diagram positions help distinguish them from other plugs, screws and fastening components used elsewhere on the sprayer.
Do not substitute a generic plug or screw based only on appearance. Confirm the manufacturer's part number, dimensions, thread specifications and applicable installation procedure. No additional replacement or supersession numbers are established by this category listing.
OEM Buying Guide
How to Order the Correct Titan Elite E15 Frame Part
Confirm the Sprayer Model
Verify that your equipment is a Titan Elite E15 and identify its applicable parts diagram.
Find the Diagram Reference
Locate reference 157 for the plug or reference 158 for the hexagonal flange screw.
Match the OEM Number
Confirm Titan 0294635 or Titan 761-178 and check the required quantity.
Order the Replacement
Purchase the correct frame hardware from AllTitanParts after confirming fitment.
Preventive Maintenance
Titan Elite E15 Frame Inspection and Maintenance Tips
Inspect Frame Fasteners
Check accessible fasteners for looseness, damage or missing hardware according to Titan's maintenance instructions.
Check Plugs and Closures
Inspect designated plug locations for missing, cracked or improperly seated components.
Look for Structural Damage
Inspect the frame for bending, cracks and other signs of impact damage. Do not operate equipment with suspected structural defects.
Avoid Incorrect Fasteners
Use manufacturer-specified hardware and follow applicable tightening requirements.
Clean Frame Surfaces
Remove coating buildup and debris using cleaning methods approved for the equipment's materials and finishes.
Check After Transportation
Inspect the frame and exposed hardware after moving or transporting the sprayer, especially following impacts or unusual vibration.
Related Titan Parts
Shop Titan Elite E15 and Airless Sprayer Replacement Parts
Titan Elite E15 Frame
Review the factory diagram and shop the two listed frame hardware products.
AllTitanParts Home
Search the full catalog by Titan model or exact OEM part number.
Titan Elite E15 Frame Repair Safety
Before servicing the frame or removing associated components, shut down the sprayer, disconnect electrical power and follow Titan's complete pressure-relief procedure. Ensure the equipment is stable and adequately supported before removing fasteners. Never work beneath unsupported equipment or loosen pressurized fluid connections. High-pressure fluid injection injuries require immediate emergency medical attention. Follow the applicable Titan service manual for disassembly, replacement hardware installation and reassembly.
Genuine Titan Elite E15 Frame Hardware
Order Titan Elite E15 Frame Parts Today
Shop genuine Titan 0294635 Plug and Titan 761-178 Hexagonal Flange Screw replacements. Compare the official frame parts diagram, verify the OEM number and order the hardware you need at AllTitanParts.
Shop Titan Elite E15 Frame PartsFrequently Asked Questions
Titan Elite E15 Frame Parts FAQ
What is the Titan Elite E15 Frame?
The frame is part of the Titan Elite E15 sprayer's supporting structure. The frame parts category identifies replacement hardware associated with this assembly.
How many Titan Elite E15 Frame parts are listed?
The AllTitanParts category currently lists two genuine Titan OEM products: Titan 0294635 Plug and Titan 761-178 Hexagonal Flange Screw.
What is Titan 0294635?
Titan 0294635 is an OEM Plug listed under the Titan Elite E15 Frame category at diagram reference 157.
What is Titan 761-178?
Titan 761-178 is an OEM Hexagonal Flange Screw listed under the Titan Elite E15 Frame category at diagram reference 158.
What does the Titan 0294635 Plug do?
It provides the manufacturer's specified plug or closure function at its designated assembly position. Consult the factory diagram for its exact location.
What is a hexagonal flange screw?
A hexagonal flange screw is a threaded fastener with a hexagonal head and an integrated bearing flange. The correct dimensions and installation requirements depend on the manufacturer's specifications.
Can I use a generic screw instead of Titan 761-178?
Do not assume a generic screw is equivalent. Confirm the required thread, dimensions, material properties and fastening specification before considering any replacement.
Does this category include a complete Titan Elite E15 frame?
No complete frame assembly is listed among the two products currently shown. The category contains an OEM plug and a hexagonal flange screw.
How do I identify the correct Titan Elite E15 frame hardware?
Use the official factory parts diagram and match reference 157 or 158 with the corresponding Titan OEM part number.
What should I check if a frame screw keeps loosening?
Inspect the fastener, mating threads and mounting location for damage. Follow Titan's specified tightening procedure. If the frame or mounting point is damaged, obtain appropriate repair guidance before operating the sprayer.
Are these genuine Titan OEM replacement parts?
Yes. AllTitanParts identifies Titan 0294635 and Titan 761-178 as genuine Titan OEM products in the Elite E15 Frame category.
Where can I buy Titan Elite E15 Frame Parts?
Shop Titan Elite E15 Frame Parts at AllTitanParts. For assistance identifying the correct OEM hardware, call 713-931-0006.
Titan OEM Parts Assistance
Need Help Finding Titan Elite E15 Frame Hardware?
Have your Titan Elite E15 model information, diagram reference and existing hardware part number ready when requesting fitment assistance.
713-931-0006