Titan part 490-014 is a hose‑to‑hose coupling with 3/8" male threads on both ends. It is used to join two high‑pressure hoses or extend hose length without adapters. This solid brass or steel coupling provides a leak‑free, high‑pressure connection. Replace a worn, cracked, or cross‑threaded coupling to restore safe, reliable hose connections on compatible airless sprayers.
| Part Number | 490-014 |
|---|---|
| Part Description | Hose to Hose 3/8"(m) x 3/8"(m) |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 490-014 Hose‑to‑Hose Coupling is a double‑male threaded connector with 3/8" NPSM (or compatible) threads on both ends. It is designed to join two high‑pressure hoses together, allowing you to extend hose length or replace a damaged hose section without changing the entire hose assembly. The coupling is machined from corrosion‑resistant steel or brass and is rated for the full working pressure of Titan airless sprayers.
A worn or damaged coupling can cause leaks, pressure drops, or sudden hose separation – a serious safety hazard. Replacing a cracked, cross‑threaded, or corroded coupling with a genuine Titan 490-014 restores a secure, leak‑free connection and ensures full pressure delivery to the spray gun.
| Joins hoses | Connects two high‑pressure hoses for extended reach |
|---|---|
| Leak‑free seal | Provides tight, pressure‑rated connection |
| Corrosion resistant | Withstands paint, solvent, and outdoor conditions |
| Leaks under pressure | Paint weeps from the coupling despite proper tightening |
|---|---|
| Damaged threads | Stripped, cross‑threaded, or corroded threads |
| Cracks or deformation | Visible cracks or bent shape |
| Difficult to tighten | Coupling binds or will not achieve a seal |
Titan part 490-014 is compatible with the following airless sprayers. Standard 3/8" NPSM (or compatible) threads are assumed. Always confirm fitment using the correct parts diagram for your exact model.
| Brand / Model | Component |
|---|---|
| PowrLiner 3100 | Hose to hose 3/8"(m) x 3/8"(m) |
| ProFinish TS40 | Hose to hose 3/8"(m) x 3/8"(m) |
| ProFinish TS50 | Hose to hose 3/8"(m) x 3/8"(m) |
| Epic 1200 HPG | Hose to hose 3/8"(m) x 3/8"(m) |
| Epic 690 HPG | Hose to hose 3/8"(m) x 3/8"(m) |
| Epic 660HPX | Hose to hose 3/8"(m) x 3/8"(m) |
| Epic 660EX | Hose to hose 3/8"(m) x 3/8"(m) |
| Epic 447HPX | Hose to hose 3/8"(m) x 3/8"(m) |
| Epic 447EX | Hose to hose 3/8"(m) x 3/8"(m) |
| Elite G40 | Hose to hose 3/8"(m) x 3/8"(m) |
| Elite E55 | Hose to hose 3/8"(m) x 3/8"(m) |
| Elite E15 | Hose to hose 3/8"(m) x 3/8"(m) |
| Airless Sprayer 1200 GXC | Hose to hose 3/8"(m) x 3/8"(m) |
| Airless Sprayer 1100XC | Hose to hose 3/8"(m) x 3/8"(m) |
| Airless Sprayer 660XC | Hose to hose 3/8"(m) x 3/8"(m) |
| Airless Sprayer 550XC | Hose to hose 3/8"(m) x 3/8"(m) |
When replacing a hose coupling, inspect the hoses and connections.
Check the female swivel ends of hoses for damaged O‑rings or threads.
If the coupling is near the gun, inspect the swivel for smooth rotation.
If extending a whip hose, ensure the whip itself is in good condition.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
