Titan part 550-222 is a replacement high‑pressure hose designed for airless paint sprayers. This durable hose delivers paint from the sprayer to the gun while maintaining full working pressure. Replace a worn, kinked, or leaking hose to restore safe, efficient spraying and prevent pressure loss or material blowback.
| Part Number | 550-222 |
|---|---|
| Part Description | Hose |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 550-222 Hose is a flexible, high‑pressure replacement hose designed to deliver paint from the sprayer to the spray gun. Built to withstand the demands of professional airless spraying, this hose resists kinking, abrasion, and chemical attack from paints, stains, and solvents.
A worn, cracked, or bulging hose can cause pressure drops, uneven spray patterns, or dangerous blowouts. Replacing a damaged hose with a genuine Titan 550-222 restores full working pressure, improves safety, and ensures consistent material flow.
| Material delivery | Transports paint from sprayer to gun under high pressure |
|---|---|
| Flexibility & reach | Allows operator to move freely around a job site |
| Pressure integrity | Maintains consistent pressure for a uniform spray pattern |
| Visible damage | Cuts, abrasions, bulges, or exposed inner braid |
|---|---|
| Leaks | Paint weeping from hose or fittings under pressure |
| Kinks or memory | Hose remains kinked, restricts flow, or won't straighten |
| Age / hardening | Hose becomes stiff, cracked, or brittle (typically after 3‑5 years) |
Titan part 550-222 is compatible with the following airless sprayers. Always confirm fitment using the correct parts diagram for your exact model and revision. Standard 1/4” NPSM (or compatible) fittings are assumed – verify thread type on your sprayer and gun.
| Brand / Model | Component |
|---|---|
| PowrLiner 3100 | Hose |
| Epic 660HPX | Hose |
| Epic 660EX | Hose |
| Epic 447HPX | Hose |
| Epic 447EX | Hose |
| Epic G40 | Hose |
| Epic E55 | Hose |
| Epic E15 | Hose |
| Airless 1100 XC | Hose |
| Airless 660XC | Hose |
| Airless 550XC | Hose |
When replacing a spray hose, inspect the connections and upstream components for wear or damage.
Check the gun inlet threads and swivel seal for leaks or cross‑threading.
Inspect the male and female couplings for damage, and replace any missing or worn O‑rings.
A deteriorating hose can shed particles – clean or replace the sprayer’s inlet filter.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
