PowrCoat 960 Outlet Filtration · High-Pressure Filter Service
Reduce Tip Clogs and Maintain Clean High-Pressure Flow
Shop verified PowrCoat 960 high-pressure filter components including the filter cap, filter elements, PTFE seals, fittings, filter body and check ball. The assembly filters pressurized coating before it reaches downstream hoses, manifolds and spray guns.
01
Verified page type
Exploded high-pressure fluid-filter replacement-parts category.
02
Official Titan cross-check
Part numbers and relationships were checked against Titan documentation.
03
Diagnostic-first guidance
Recommendations require inspection before replacement.
04
6 active product links
No discontinued or unconfirmed product listing is linked.
Assembly Overview
PowrCoat 960 High Pressure Filter Parts
This page is an exploded high-pressure fluid-filter category. Titan’s parts table identifies the cap, standard and optional filter screens, thick and thin PTFE gaskets, outlet fitting, plugs, filter body and stainless ball. The filter must be depressurized before opening because it contains coating at system pressure.
Main Functions
Functions Supported by the Assembly
- Captures debris before coating reaches hoses and spray tips.
- Provides selectable filter mesh for coating requirements.
- Seals pressurized material through paired PTFE gaskets.
- Routes filtered coating through outlet fittings and ports.
- Supports pressure retention with the internal stainless ball.
Service Applications
When Repair Professionals Use This Page
- Correcting frequent spray-tip blockage.
- Restoring flow after filter restriction.
- Repairing filter-cap leakage.
- Replacing damaged filter screens or seals.
- Servicing outlet ports and check components.
Troubleshooting
Operating Symptoms and Diagnostic Priorities
Relieve all stored air and fluid pressure before service. Inspect the connected components and confirm the actual failure before replacement.
| Operating symptom |
Inspection points |
Recommended action |
| Frequent tip clogging |
920-004/920-005/920-007 filter element |
A torn, missing or unsuitable element allows debris downstream; inspect before replacement. |
| Reduced material flow |
Filter element and 0290424A body |
Restriction may be hardened coating rather than a damaged housing; clean and inspect first. |
| Leak around filter cap |
920-930 cap, 920-006 thick gasket and 920-070 thin gasket |
Both seals and cap threads must be inspected before replacing the cap. |
| Leak at outlet fitting |
808-555 fitting and filter-body threads |
Determine whether the fitting or housing thread is damaged before replacement. |
| Pressure does not hold |
920-103 ball and internal seating area |
Contamination or wear can prevent sealing; clean and inspect the seat first. |
| Filter cap will not tighten correctly |
920-930 cap and 0290424A body threads |
Cross-threading or coating buildup must be diagnosed before ordering parts. |
Verified Replacement Components
High-Value Replacement Parts
Only active products shown on the supplied page and retained after verification are linked below.
Verified component
Titan 920-930 Filter Cap
Filter-housing cap for service access and pressure sealing.
View Titan 920-930
Verified component
Titan 920-004 Filter Element, 50 Mesh
Standard 50-mesh stainless filter element.
View Titan 920-004
Verified component
Titan 920-006 Thick PTFE Gasket
Primary cap gasket for pressure containment.
View Titan 920-006
Verified component
Titan 808-555 Fitting
Verified outlet fitting used in the filter assembly.
View Titan 808-555
Verified component
Titan 0290424A Filter Body
Filter housing containing the element and sealing components.
View Titan 0290424A
Verified component
Titan 920-103 Stainless Ball
Internal stainless check ball used in the filter assembly.
View Titan 920-103
Buying Guide
How to Select the Correct Replacement
STEP 1
Confirm the machine and assembly
Match PowrCoat 960 and the exact assembly page.
STEP 2
Match the diagram callout
Use the verified part number and component name.
STEP 3
Diagnose connected parts
Inspect seals, threads, valves and mating surfaces.
STEP 4
Order only confirmed products
Avoid discontinued, mismatched or unverified listings.
Maintenance
Maintenance Priorities
- Relieve fluid pressure before removing the cap.
- Clean the filter element after use.
- Inspect both PTFE gaskets whenever the cap is opened.
- Match mesh selection to coating requirements.
- Inspect cap and body threads for damage.
- Keep outlet ports sealed with the correct fittings or plugs.
Repair Planning
Plan a Complete Repair
Record the PowrCoat 960 model, diagram position, symptom and exact leak, restriction or wear location before disassembly. Photograph hose routing and component orientation where useful.
Inspect each mating pair during teardown and replace only after confirming the true failure point. This approach reduces unnecessary parts cost, repeat downtime and installation errors.
Fast Navigation
Shop Major Components
FAQ Section
PowrCoat 960 High Pressure Filter Parts FAQs
Contractor-focused answers based on the supplied category and verified Titan documentation.
What type of page is this?+
It is an exploded high-pressure fluid-filter replacement-parts category.
Which element is the standard filter?+
Titan identifies 920-004 as the 50-mesh element.
What optional mesh choices are listed?+
The page lists 920-005 and 920-007 as alternate filter screens.
Which seals sit under the cap?+
Titan lists 920-006 thick and 920-070 thin PTFE gaskets.
Why does the filter leak after cleaning?+
A gasket may be flattened, damaged or installed against a contaminated sealing surface.
What causes repeated tip clogging?+
Inspect the filter element for damage, wrong mesh or bypass.
Which part forms the filter housing?+
Titan identifies 0290424A as the filter body.
Which part closes the housing?+
Titan identifies 920-930 as the filter cap.
What should be done before opening the filter?+
Fully relieve system pressure.
Why diagnose before replacing the body?+
Leaks may originate from seals, fittings or damaged threads rather than the housing.
Find the Correct Replacement
Repair the PowrCoat 960 With Verified Components
Use the exact part number, assembly callout and operating symptom to narrow the correct replacement.
Search using:
- Titan part number
- Assembly diagram callout
- PowrCoat 960 model
- Component or service-kit name
- Leakage, restriction or operating symptom
Related PowrCoat 960 Searches
-1.jpg)
