Titan part 0290424A is a filter body (filter housing) used in the fluid filtration system on compatible PowrTwin airless sprayers. This direct‑replacement housing holds the filter element and connects the fluid inlet to the pump, ensuring proper filtration and flow.
| Part Number | 0290424A |
|---|---|
| Part Description | Filter Body |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 0290424A Filter Body is a genuine OEM replacement housing for the fluid filter assembly on compatible PowrTwin airless sprayers. This component houses the filter element, provides sealing surfaces for the filter cap, and directs fluid flow from the inlet to the pump.
A cracked, warped, or corroded filter body can cause fluid leaks, loss of prime, air ingestion, or debris bypass that damages the pump. Replacing a damaged filter body restores proper filtration integrity and prevents contamination of the fluid section.
| Fluid housing | Encloses and supports the filter element securely |
|---|---|
| Flow direction | Channels fluid from the inlet through the filter to the pump |
| Sealing interface | Provides mating surfaces for the filter cap and inlet fittings |
| Visible crack or break | Fluid leaks or structural damage to the housing |
|---|---|
| Corrosion or pitting | Rust or chemical attack compromises sealing surfaces |
| Warped sealing face | Cap will not seal properly, causing leaks or air suction |
| Damaged threads | Inlet fitting or cap threads are stripped or cross‑threaded |
Titan 0290424A is compatible with the following PowrTwin models. Always confirm fitment using the parts diagram for your specific machine.
| Brand / Model | Component |
|---|---|
| PowrTwin 12000 Plus DI | Filter Body |
| PowrTwin 6900 | Filter Body |
| PowrTwin 4900 | Filter Body |
| PowrTwin 8900 | Filter Body |
| PowrTwin 12000 Plus | Filter Body |
When replacing the filter body, these related components are often inspected or replaced at the same time to ensure a complete and reliable filter assembly.
Always install a new filter element when replacing the housing to prevent debris carryover.
Includes cap, spring support, and gasket. Replace if the cap is cracked or spring weak.
Inspect threads and sealing surfaces; replace if damaged to avoid leaks.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
