PowrCoat AirCare System · Filter, Regulator and Lubricator Service
Protect Pneumatic Performance With Clean, Regulated, Lubricated Air
Shop verified PowrCoat 960 automatic lubricator and FRL service components. Titan’s official diagram covers the regulator, body connectors, 5-micron filter, automatic drain, drip control, fill plug and lubricator bowl used to condition compressed air before it reaches the air motor.
PowrCoat 960 Automatic Lubricator Assembly Parts
The automatic lubricator page is an exploded FRL replacement-parts category. The assembly filters incoming air, regulates pressure, removes collected moisture and meters lubricant into the pneumatic stream. Titan’s PowrCoat documentation identifies this AirCare system as standard equipment and instructs operators to observe the lubricator injection rate during operation.
Functions Supported by the Assembly
- Filters incoming compressed air through a 5-micron element.
- Regulates pneumatic supply pressure before the air motor.
- Automatically drains collected moisture from the filter bowl.
- Meters lubricant through the drip-control assembly.
- Provides service access through connectors, plugs and bowls.
When Repair Professionals Use This Page
- Correcting unstable regulated air pressure.
- Servicing restricted or contaminated air filtration.
- Repairing automatic-drain problems.
- Restoring visible lubricant metering.
- Replacing leaking connector seals or bowls.
Operating Symptoms and Diagnostic Priorities
Relieve all stored air and fluid pressure before service. Inspect the connected components and confirm the actual failure before replacement.
High-Value Replacement Parts
Only active products shown on the supplied page and retained after verification are linked below.
Titan 0533917 Regulator Relieving Repair Kit
Regulator service kit for restoring pressure-control response.
Titan 0533918 Body Connector O-Ring Kit
Seal kit for FRL body-connector joints.
Titan 0533911 Standard 5-Micron Filter
Verified air-filter element for incoming compressed air.
Titan 0533912 Auto Drain Kit
Automatic moisture-drain service kit.
Titan 0533914 Drip Control Assembly
Lubricator metering component controlling visible oil delivery.
Titan 0533916 Lubricator Bowl
Lubricant reservoir bowl for the FRL assembly.
How to Select the Correct Replacement
Confirm the machine and assembly
Match PowrCoat 960 and the exact assembly page.
Match the diagram callout
Use the verified part number and component name.
Diagnose connected parts
Inspect seals, threads, valves and mating surfaces.
Order only confirmed products
Avoid discontinued, mismatched or unverified listings.
Maintenance Priorities
- Inspect the 5-micron element regularly.
- Drain collected moisture before it reaches the air motor.
- Maintain the lubricant level with the specified pneumatic oil.
- Observe the drip rate during operation.
- Keep connector joints aligned and clean.
- Depressurize the air system before FRL service.
Plan a Complete Repair
Record the PowrCoat 960 model, diagram position, symptom and exact leak, restriction or wear location before disassembly. Photograph hose routing and component orientation where useful.
Inspect each mating pair during teardown and replace only after confirming the true failure point. This approach reduces unnecessary parts cost, repeat downtime and installation errors.
Shop Major Components
PowrCoat 960 Automatic Lubricator Assembly Parts FAQs
Contractor-focused answers based on the supplied category and verified Titan documentation.
Repair the PowrCoat 960 With Verified Components
Use the exact part number, assembly callout and operating symptom to narrow the correct replacement.
- Titan part number
- Assembly diagram callout
- PowrCoat 960 model
- Component or service-kit name
- Leakage, restriction or operating symptom