Titan Impact 740 Airless Sprayer Parts
Shop genuine OEM Titan Impact 740 Airless Sprayer Parts by factory assembly and exploded diagram. Find fluid-section, drive, filter, upright-cart, low-rider, siphon, electrical and accessory components for professional Impact 740 repair and maintenance. Select the correct assembly, locate the diagram callout and verify the complete Titan OEM part number before ordering.
Find the Correct Parts for Your Titan Impact 740
The Titan Impact 740 is a professional electric airless sprayer platform with a manufacturer-rated maximum delivery of 0.80 GPM (3.03 LPM), maximum operating pressure of 3,300 PSI (22.8 MPa) and a 0.029-inch maximum tip size. Titan equips the platform with a 2.0 HP brushless DC motor.
This category organizes Impact 740 replacement components by major factory assembly. Contractors, maintenance departments and repair technicians can move directly from the machine to the applicable exploded diagram instead of attempting to identify components by appearance alone.
Titan Impact 740 Specifications
| Manufacturer | Titan |
| Model | Impact 740 Electric Airless Sprayer |
| Maximum Delivery | 0.80 GPM / 3.03 LPM |
| Maximum Pressure | 3,300 PSI / 22.8 MPa |
| Maximum Tip Size | 0.029 in. |
| Motor | 2.0 HP Brushless DC Motor |
| Electrical | 100–120 V AC • 50/60 Hz • 15 A |
| Maximum Hose Length | 300 ft. |
| Generator Requirement | 5,000 watts; disable idle-down feature |
| Factory Spray Gun | RX-Pro |
| Factory Spray Hose | 50 ft. / 15 m • P/N 316-505 |
| Spray Filter | 60 mesh • P/N 0089958 |
Identify Your Titan Impact 740 Configuration
Titan service documentation identifies the Impact 740 in High Cart and Low Cart configurations. Both share the primary performance specifications, but cart, siphon, frame and other configuration-sensitive components should be verified against the applicable parts diagram.
| Configuration | Model Number | Weight | Parts Check |
|---|---|---|---|
| High Cart | 805-007 | 83 lb. | Verify upright-cart, wheel, frame and mounting components |
| Low Cart | 805-008 | 81 lb. | Verify low-rider cart, siphon, wheel and mounting components |
Choose Your Titan Impact 740 Parts Assembly
Select the machine system you need to service, open its exploded diagram, locate the numbered component and match the callout to the corresponding Titan OEM part number.
Which Impact 740 Parts Diagram Should You Use?
| Repair Area | Open This Diagram | Typical Components |
|---|---|---|
| Core / Electrical | Main Assembly | Motor shroud, belly pan, controller, filter head and associated hardware |
| Mechanical Drive | Drive Assembly | Housing, slider, gears, crankshaft and thrust components |
| Pump / Pressure | Fluid Section 805-236A | Piston, packings, seals, valves and retainers |
| Fluid Filtration | Filter Assembly 805-269A | Filter housing, filter components, seals and fittings |
| High Cart Structure | Upright Cart 0552524A | Frame, wheels, handle and mounting components |
| Low Cart Structure | Low Rider Cart 805-289A | Low-rider frame, wheels and mounting hardware |
| Low Rider Material Intake | Siphon Assembly 805-296 | Siphon and related material-intake components |
Titan Impact 740 Fluid Section Parts
The fluid section contains the pumping and sealing components responsible for moving coating and developing spray pressure. When diagnosing pressure loss, poor priming, fluid leakage or irregular pump operation, inspect the applicable pump components before replacing complete assemblies.
The Impact 740 fluid-section catalog includes genuine OEM service components such as the 805-1010 Repacking Kit, 805-505 Seal Retainer and related piston, valve, packing and sealing components. Use the exploded drawing for P/N 805-236A to identify the exact replacement required.
SHOP FLUID SECTION PARTS →Titan Impact 740 Drive Assembly Parts
The drive system transfers motor output into the reciprocating movement required to operate the fluid pump. Mechanical wear, damaged gears or problems in the slider and crankshaft system should be diagnosed using the factory exploded diagram.
Impact 740 drive listings include the 805-229A Housing Assembly, 805-241A Slider Assembly, 805-445 Thrust Washer, 805-239 Crankshaft/Gear Assembly and 805-240 1st Stage Gear Assembly.
VIEW DRIVE ASSEMBLY PARTS →Impact 740 Filter Assembly Parts
The filter assembly helps control debris in the pressurized fluid path before material continues through the hose and spray system. Inspect filter components as part of routine maintenance and whenever contamination or restriction is suspected.
Use the factory 805-269A Filter Assembly diagram to identify the filter head, filter element, seals, fittings and related components rather than selecting replacements by dimensions or appearance alone.
SHOP FILTER ASSEMBLY PARTS →High Cart and Low Cart Components Require Configuration Verification
Titan identifies the Impact 740 High Cart as 805-007 and the Low Cart as 805-008. Although both configurations share the principal 0.80 GPM, 3,300 PSI and 0.029-inch performance ratings, do not assume that cart, siphon, wheel, frame or mounting components interchange. Verify the machine configuration and factory diagram before ordering.
Match the Impact 740 Symptom to the Correct System
| Symptom | Inspection Starting Point | Parts Diagram |
|---|---|---|
| Will Not Prime | Material supply, siphon/intake path and pump inlet | Siphon / Fluid Section |
| Low or Unstable Pressure | Fluid-section packings, piston, valves, seals and filter condition | Fluid Section / Filter |
| Fluid Leakage | Packings, seals, fittings and related fluid-section components | Fluid Section |
| Mechanical Noise | Housing, slider, gears, crankshaft and thrust components | Drive Assembly |
| Electrical / Control Problem | Power supply, controller, wiring and core electrical components | Main Assembly |
| Cart / Wheel Damage | Confirm High Cart 805-007 or Low Cart 805-008 first | Upright Cart / Low Rider Cart |
Find the Correct Titan Impact 740 Part in Four Steps
Buy Titan Impact 740 Parts by Factory Diagram
Similar-looking sprayer parts are not necessarily interchangeable. Machine configuration, mounting geometry, dimensions, electrical requirements, sealing interfaces and assembly revisions can determine whether a component is correct.
For reliable identification, use the applicable factory exploded drawing as the primary reference. Match the numbered callout to the complete Titan OEM part number and verify the machine configuration before purchasing fluid-section, drive, electrical, filter, siphon or cart components.
Relieve Pressure Before Servicing the Impact 740
Airless spraying equipment operates at pressures capable of causing serious fluid-injection injury. Shut down the sprayer, disconnect electrical power and follow Titan's pressure-relief procedure before inspecting or removing pressurized fluid-system components. Never loosen a pressurized spray gun, hose, fitting, filter, valve or pump component.
Need Parts for Another Titan Impact Sprayer?
Titan Impact sprayers use model- and configuration-specific parts catalogs. If your machine is not an Impact 740, return to the main Impact Sprayer Parts directory and select the exact model before purchasing replacement components.
Browse All Titan Impact Sprayer Parts → Choose your exact Impact model and shop genuine Titan OEM replacement parts by factory diagram.Buy Titan Impact 740 Airless Sprayer Parts
Identify the Impact 740 configuration, select the correct factory assembly, locate the required component on the exploded diagram and verify its complete Titan OEM part number before placing your order.
SHOP IMPACT 740 PARTS →Titan Impact 740 Parts FAQ
What are the Titan Impact 740 model numbers?
What is the maximum pressure of the Titan Impact 740?
What is the maximum flow rate of the Impact 740?
What is the maximum tip size for the Titan Impact 740?
Where can I find Impact 740 pump and packing parts?
Which repacking kit is listed for the Impact 740 fluid section?
Where can I find Impact 740 drive-system parts?
Are High Cart and Low Cart Impact 740 parts interchangeable?
How do I make sure I order the correct Impact 740 replacement part?
Not Sure Which Impact 740 Part You Need?
Have the machine model number, High Cart or Low Cart configuration, serial information, assembly name, diagram callout and any OEM number visible on the original component available. These references provide the strongest basis for confirming the correct replacement part.