PowrCoat 975 · 75:1 · 7,500 PSI · 100 PSI Air Inlet
Reduce Tip Clogs and Protect Downstream PowrCoat 975 Components
Shop verified high-pressure filter components including the cap, 50-mesh and optional elements, PTFE gaskets, outlet fitting, pipe plug and stainless check ball.
PowrCoat 975 High Pressure Filter
This exploded filter page covers the service components that remove debris from pressurized coating before it reaches hoses, manifolds and spray guns. The standard element is Titan 920-004, with optional 920-005 and 920-007 elements listed on the page.
Verified component index: 920-930, 920-004, 920-005, 920-007, 920-006, 920-070, 808-555, 227-033, 920-103
Functions Supported by the Assembly
- Captures coating debris before downstream delivery.
- Supports alternative mesh choices.
- Seals the filter cap with PTFE gaskets.
- Routes filtered coating through outlet fittings.
- Supports pressure retention with the stainless ball.
Service Applications
- Correcting repeated tip clogging.
- Restoring flow after filter restriction.
- Repairing filter-cap leakage.
- Replacing damaged screens or seals.
- Servicing outlet and check components.
Troubleshooting
Relieve all air and fluid pressure. Inspect genuine components shown on the supplied page and diagnose the actual failure before replacement.
High-Value Replacement Parts
Only active products verified on the supplied page are linked.
Titan 920-930 Filter Cap
Pressure filter cap.
Titan 920-004 Filter Element, 50 Mesh
Standard stainless filter element.
Titan 920-005 Manifold Filter
Optional fine filter element.
Titan 920-006 PTFE Gasket
Thick filter-cap gasket.
Titan 808-555 Fitting
Verified fluid outlet fitting.
Titan 920-103 Stainless Ball
Internal check ball.
Buying Guide
Confirm the page
Use the exact PowrCoat 975 assembly.
Match the part number
Check diagram callout and component name.
Inspect mating parts
Find the true failure point.
Order verified fitment
Exclude discontinued or uncertain items.
Maintenance
- Relieve all stored pressure before service.
- Keep coating and air passages clean.
- Inspect seals and mating surfaces together.
- Check fasteners and connections for alignment.
- Record model, part number and service date.
- Replace only after confirming the fault.
Repair Planning
Record the exact model, diagram position, symptom and affected connection before disassembly. Photograph routing and orientation where useful, then inspect every mating pair so the repair addresses the cause rather than only the visible symptom.
Fast Navigation
FAQ Section
Repair the PowrCoat 975 With Verified Information
Use the exact part number, page and operating symptom to narrow the correct replacement.
- Titan part number
- Assembly callout
- PowrCoat 975 model
- Component or kit name
- Operating symptom