PowrCoat 975 · 75:1 · 7,500 PSI · 100 PSI Air Inlet
Protect the PowrCoat 975 Air Motor With Clean, Regulated and Lubricated Air
Shop verified FRL components including the regulator repair kit, 5-micron filter, body-connector seals, automatic drain, drip control and lubricator bowl.
PowrCoat 975 Automatic Lubricator Assembly
The PowrCoat 975 AirCare assembly filters incoming compressed air, regulates pressure, removes moisture and meters lubricant before air reaches the motor. Discontinued filter bowl 0533915 is excluded from linked product cards.
Verified component index: 0533917, 0533911, 0533918, 0533910, 0533909, 0533915, 0533912, 0533914, 0533913, 0533916
Functions Supported by the Assembly
- Filters incoming air through a 5-micron element.
- Regulates pneumatic pressure.
- Automatically drains collected moisture.
- Meters lubricant through the drip-control assembly.
- Seals connected FRL bodies with dedicated O-rings.
Service Applications
- Correcting unstable regulated pressure.
- Servicing restricted airflow.
- Repairing automatic-drain problems.
- Restoring lubricant metering.
- Replacing leaking FRL connector seals.
Troubleshooting
Relieve all air and fluid pressure. Inspect genuine components shown on the supplied page and diagnose the actual failure before replacement.
High-Value Replacement Parts
Only active products verified on the supplied page are linked.
Titan 0533917 Regulator Repair Kit
Regulator service kit.
Titan 0533911 Standard 5-Micron Filter
Compressed-air filter element.
Titan 0533918 Body Connector O-Ring Kit
FRL connector seal kit.
Titan 0533912 Auto Drain Kit
Automatic moisture-drain service kit.
Titan 0533914 Drip Control Assembly
Lubricator metering component.
Titan 0533916 Lubricator Bowl
Lubricant reservoir bowl.
Buying Guide
Confirm the page
Use the exact PowrCoat 975 assembly.
Match the part number
Check diagram callout and component name.
Inspect mating parts
Find the true failure point.
Order verified fitment
Exclude discontinued or uncertain items.
Maintenance
- Relieve all stored pressure before service.
- Keep coating and air passages clean.
- Inspect seals and mating surfaces together.
- Check fasteners and connections for alignment.
- Record model, part number and service date.
- Replace only after confirming the fault.
Repair Planning
Record the exact model, diagram position, symptom and affected connection before disassembly. Photograph routing and orientation where useful, then inspect every mating pair so the repair addresses the cause rather than only the visible symptom.
Fast Navigation
FAQ Section
Repair the PowrCoat 975 With Verified Information
Use the exact part number, page and operating symptom to narrow the correct replacement.
- Titan part number
- Assembly callout
- PowrCoat 975 model
- Component or kit name
- Operating symptom