Titan 920-103 Stainless Ball, 13/16"
OEM Titan Check Valve Component
Titan 920-103 Stainless Ball, 13/16" is an OEM precision-ground stainless steel check valve ball used in fluid pump and outlet manifold assemblies on compatible Admiral, Commander, Hydra, PowrTwin, PowrLiner, and PowrCoat sprayer models.
Compatibility Overview
Works with the seat to create a seal that prevents backflow and maintains system pressure during pump operation. A worn, pitted, or corroded ball causes loss of pressure, fluid backflow, and poor spray performance. OEM replacement restores proper valve sealing and reliable fluid flow control.
Titan Check Valve Ball Replacement
Titan 920-103 Stainless Ball, 13/16" for Pump and Manifold Service
Titan 920-103 is an OEM precision-ground 13/16" stainless steel ball that functions as a critical check valve component in compatible Titan fluid pump and outlet manifold assemblies. Listed in the official Hydra Pro IV manual as "920-103 Ball" within the 185-551 Fluid Pump Assembly, this component is used across a wide range of Titan sprayer platforms including Admiral, Commander, Hydra Pro, PowrTwin, PowrLiner, and PowrCoat models. The ball works with a seat to create a seal that prevents backflow and maintains system pressure during pump operation. In the outlet manifold filter assembly, it supports proper valve sealing and pressure control. Over time, check valve balls can become worn, pitted, scored, or corroded, leading to loss of pump pressure, fluid backflow, and poor spray performance. If you observe pressure drops, inconsistent spray, or backflow, inspect the stainless ball for wear. Replacing a worn ball with this genuine OEM part restores proper valve operation and ensures reliable performance.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan precision-ground 13/16" stainless steel ball that serves as a critical check valve component in Admiral, Commander, Hydra Pro, and PowrTwin fluid systems. |
| Function | Works with the seat to create a seal that prevents backflow and maintains system pressure during pump operation. In the outlet manifold, it supports proper valve sealing and pressure control. |
| System Location | Fluid pump assembly and outlet manifold filter assembly. Listed as item "920-103 Ball" in the Hydra Pro IV 185-551 Fluid Pump Assembly. |
| Documented Compatible Models | Admiral 185-551 Fluid Pump Assembly; Commander 181-556 and 245-555 Fluid Pump Assemblies; Commander 920 Outlet Manifold Filter Assembly; Hydra M2000/M4000; Hydra Pro IV; Hydra Pro Super; PowrTwin 3500/3500-DC/4500/4900GH/5500/6900GH/6900GHD; PowrLiner 6000/6900; PowrCoat 730/745/940/960/975; PowrTex Heavy Material Sprayer. Verify your exact model against the parts diagram. |
| OEM Part Number | 920-103 Stainless Ball, 13/16". |
| Common Problems Solved | Loss of pump pressure, fluid backflow, poor spray performance, and leaking caused by worn, pitted, or corroded balls. |
| Replacement Indicators | Replace if the ball shows visible wear, pitting, scoring, corrosion, or loss of roundness. Also replace if it fails to seal properly against the seat. |
| Related Parts Commonly Serviced Together | Piston seat (182-921), foot valve assembly (183-992), ball cage (240-022), and O-rings (183-230, 182-007). |
| Installation Notes | Inspect the seat for nicks or grooves before installing a new ball. Replace the seat if damaged. Ensure the ball moves freely and seats properly. |
The 920-103 Stainless Ball is a critical check valve component in fluid pump and outlet manifold assemblies. If you observe pressure drops, inconsistent spray, or backflow, inspect the ball for wear, pitting, or corrosion. Always inspect the seat when replacing the ball and replace it if damaged. Verify model compatibility against your Titan service manual, as valve configurations vary across sprayer platforms.
Frequently Asked Questions
Contractor-focused answers for confirming fitment and service value.
No reviews yet. Be the first to review this product!