PowrCoat model numbers end in C for the cart mount or W for the wall mount, for example 0533940C and 0533940W. The site has one pump, air motor and filter diagram per model, and a separate wall-mount assembly page for the frame. Wall units weigh about 40 lbs less on the 940, 960 and 975. Order frame parts from the diagram that matches your mount.
C and W in the model number
Every PowrCoat is sold in two configurations, and the last letter of the part number says which. C is the cart mount and W is the wall mount. Titan does not explain the letters, so this is a pattern we observe across the whole series, and the site's own listings for the 1045, 1064 and 1072 confirm it: they are named "Cart Mount, Bare" and "Wall Mount, Bare".
PowrCoat cart-mount and wall-mount model numbers
| Model | Ratio | Cart mount | Wall mount |
|---|---|---|---|
| 630 | 30:1 | 0533630C | 0533630W |
| 730 | 30:1 | 0533730C | 0533730W |
| 745 | 45:1 | 0533745C | 0533745W |
| 940 | 40:1 | 0533940C | 0533940W |
| 960 | 60:1 | 0533960C | 0533960W |
| 975 | 75:1 | 0533975C | 0533975W |
| 1045 | 45:1 | 05331045C | 05331045W |
| 1064 | 64:1 | 05331064C | 05331064W |
| 1072 | 72:1 | 05331072C | 05331072W |
In the model names the last two digits match the ratio in these spec tables, for example 940 is 40:1 and 1064 is 64:1. That is a pattern in the tables, not a Titan statement. Not every number above is listed on this site, so check availability with our parts team.
What changes
The site has one air motor, fluid pump and filter diagram per model, not one per mount, so those parts are ordered by model. The frame is what differs, and it has its own page for each mount. Titan's series page lists 16 in. pneumatic tires, lift handles, a crane hook and a hose rack that holds up to 200 feet of 1/2 in. hose among the series features. It does not separate cart and wall versions in that list, so do not assume what a wall unit omits. Confirm what your configuration includes on its diagram.
Weight is the clearest difference. Titan's spec tables give these weights:
Cart and wall mount weights
| Model | Cart mount | Wall mount |
|---|---|---|
| 940 | 140 lbs (63.5 kg) | 100 lbs (45.3 kg) |
| 960 | 139 lbs (63 kg) | 98 lbs (44.4 kg) |
| 975 | 135 lbs (61.2 kg) | 95 lbs (43.1 kg) |
The 745 cart is listed at 133 lbs. We do not give weights for the other models because our sources disagree or are incomplete.
That is roughly 40 lbs less on a wall unit in each case. Add the hose, gun, a full pail and the fluid in the pump and your working weight will be higher than the figure.
The wall-mount assembly diagrams
Each model from the 730 up has its own wall-mount assembly page.
Wall mount assembly diagram pages
| Model | Diagram page | Parts listed |
|---|---|---|
| 730 | 730 wall mount | 38 |
| 745 | 745 wall mount | 34 |
| 940 | 940 wall mount | 34 |
| 960 | 960 wall mount | 36 |
| 975 | 975 wall mount | 32 |
| 1045 | 1045 wall mount | 23 |
| 1064 | 1064 wall mount | 23 |
| 1072 | 1072 wall mount | 19 |
The site lists no separate wall-mount page for the 630. Its main assembly page shows a wall mount weldment, 0533246.
Wall-mount parts on the 1045, 1064 and 1072 pages
On the 730 to 975 wall-mount pages the list looks different: the 944-028A bleed valve assembly, a 200-555 adapter, the 862-410 locknut, and on the 975 the 0533224A eye hook assembly and 0533319 shut off valve. The wall pages also show complete assemblies as single numbers, such as the 185-551A pump assembly on the 940 page and the 0533262 pump assembly on the 1045 page, which is useful if you are replacing a whole unit rather than a part.
Cart assembly diagrams
The cart side is split in two ways. On the 730 to 975 the cart is part of the main assembly page, where it appears as 0533203A. Our main assembly guide covers that page. The 630 and the 1045 to 1072 have their own cart pages:
- 630 cart, nine parts, including the 0533545 handle assembly and 0533551 wheel.
- 1045, 1064 and 1072 carts, three parts each: the 670-105 wheel, the 0533863 wheel spacer and the 0533441 cotter pin.
Which to order parts for
Read the end of your part number
Look at the tag or paperwork. C means cart mount and W means wall mount. If there is no tag, call (713) 931-0006 with the model and serial number.
Open the right diagram
For pump, air motor and filter parts, the model's own pump, air motor and filter pages apply to both mounts. For frame, wheel and bracket parts, use the wall-mount or cart page.
Match the callout
Find the numbered callout and add that part. Titan's manuals are on our manuals page.
Converting between cart and wall
We do not list a conversion kit, and nothing in Titan's material that we hold describes converting a cart unit to a wall unit or the reverse. If you are thinking of changing mounts, call (713) 931-0006 before you order parts, because the diagrams do not say whether the parts interchange.
Frame, wall-mount and cart parts from the pages above:
The Short Version
C is cart mount and W is wall mount at the end of a PowrCoat model number, and the wall unit weighs about 40 lbs less on the 940, 960 and 975. Pump and motor parts follow the model, and frame parts follow the mount, so match the wall-mount or cart diagram to your unit before you order.
Not sure whether yours is a cart or wall unit?
Call (713) 931-0006 with your model and serial number and our parts team will help match the part before you order.
(713) 931-0006Order by Parts Diagram