Titan Advantage 400 Suction Set Assembly Parts
Shop genuine Titan Advantage 400 Suction Set Assembly Parts for professional airless sprayer maintenance and repair. Find OEM suction set assemblies, return tubes, inlet screens, O-rings, retaining clips and associated hardware for the factory-specified material intake arrangement.
Whether you're troubleshooting a sprayer that will not prime, replacing a damaged return tube or servicing worn intake seals, use the exploded parts diagram to identify the correct Titan OEM part number before ordering.
Maintain Reliable Coating Pickup and Sprayer Priming
The suction set assembly provides the intake path through which coating material travels from its supply container toward the pump. Its inlet screen helps intercept debris before the material enters the fluid section, while correctly installed seals and retaining components support the intended connection arrangement.
A clogged inlet screen, damaged intake tube or compromised seal may contribute to poor material pickup or priming difficulties. Return-line components should also be inspected when material does not circulate as expected during the manufacturer's priming procedure.
AllTitanParts provides genuine Titan OEM replacement components identified by factory part number. Use the category diagram to locate individual parts or the complete suction set assembly, then confirm your machine's configuration before purchase.
Shop Titan Advantage 400 Suction Set Components
Identify frequently serviced intake and return-line components by their genuine Titan OEM part numbers.
Titan 0558672A Suction Set Assembly
Factory-listed complete suction set for applicable Advantage 400 stand and low-boy configurations. Confirm package contents and fitment before purchase.
Part Number: 0558672ATitan 0558659A Return Tube
Genuine OEM return tube for the designated suction set arrangement. Inspect for damage, restrictions or insecure connections.
Part Number: 0558659ATitan 700-805 Inlet Screen Filter
OEM inlet screen used to help prevent debris from entering the pump intake. Inspect for clogging, damage or missing mesh.
Part Number: 700-805Titan 9871105 O-Ring
Genuine Titan replacement O-ring, listed as replacing 704-121, for its designated intake connection.
Part Number: 9871105Titan Advantage 400 Suction Set OEM Parts Reference
The eight products below appear in the Advantage 400 Suction Set Assembly category. Match the diagram item number with the corresponding OEM part before ordering.
| Diagram Item | Titan Part Number | Replacement Component | Purpose |
|---|---|---|---|
| 1 | 0558672A | Suction Set Assembly | Complete material intake assembly |
| 2 | 0558659A | Return Tube | Fluid return path |
| 3 | 0279459 | Clip | Component retention |
| 4 | 700-805 | Inlet Screen Filter | Intake debris filtration |
| 5 | 9871105 | O-Ring, Replaces 704-121 | Intake connection sealing |
| 6 | 9822526 | Retaining Clip | Component retention |
| 7 | 9850638 | Tie Wrap | Routing and retention |
| 7A | 704-109 | O-Ring | Designated sealing location |
Diagram item numbers identify positions, not installed quantities. Verify the manufacturer's parts drawing, current product description and exact machine configuration.
How to Choose the Correct Suction Set Replacement Part
Identify the Configuration
Confirm whether your Advantage 400 is a stand, low-boy or upright cart model.
Inspect the Intake Path
Check the suction set, screen, return tube, seals and retaining components.
Match the OEM Number
Use the factory exploded diagram to identify the exact Titan part number.
Verify and Purchase
Confirm fitment, required quantity and kit contents before checkout.
Advantage 400 Stand, Low-Boy and Upright Cart Suction Parts
Titan's factory main assembly parts list identifies suction set 0558672A for the stand and low-boy configurations. The upright cart configuration uses separately identified siphon and return-line components.
Stand Configuration
Factory main assembly reference: Titan 0558672A Suction Set Assembly.
Low-Boy Configuration
Factory main assembly reference: Titan 0558672A Suction Set Assembly.
Upright Cart Configuration
Uses a separately listed intake arrangement, including Titan 705-054 Siphon Tube and 0551556 Return Tube. Confirm the relevant diagram before purchase.
Titan Advantage 400 Suction Set Troubleshooting Guide
These symptoms help identify components to inspect. They do not establish a diagnosis without further testing.
| Observed Condition | Components to Inspect | Recommended Action |
|---|---|---|
| Sprayer will not prime | Inlet screen, suction set and seals | Check for restrictions, damage or air entering the intake connection. |
| Material pickup is restricted | Inlet screen and suction passage | Inspect for dried coating or debris and follow Titan's cleaning procedure. |
| Air enters the suction path | O-rings, tube connections and intake components | Inspect for damaged seals, cracks or improperly seated connections. |
| Return flow is interrupted | Return tube and related fluid system | Check for restrictions and follow the manufacturer's priming diagnostics. |
| Return tube is loose | Tube, clip, retaining hardware | Inspect the factory retention arrangement for missing or damaged parts. |
| Intake connection leaks | O-rings and mating surfaces | Identify the damaged component and replace it with the correct OEM part. |
Replace Individual Suction Parts or the Complete Assembly?
Choose the repair approach according to the damaged component and the manufacturer's instructions.
Inlet Screen Replacement
Inspect Titan 700-805 when the screen is damaged, excessively restricted or no longer serviceable.
Seal and Retainer Replacement
Use the correct O-ring or retaining component when the failure is isolated to a specified connection.
Complete Suction Set Replacement
Consider Titan 0558672A when the applicable complete assembly is damaged or replacement is warranted by the repair diagnosis.
Explore Related Titan Advantage 400 Assemblies
Inspect adjacent systems when suction repairs do not resolve the diagnosed equipment problem.
Why Choose Genuine Titan Advantage 400 Suction Set Parts?
Genuine Titan OEM components are identified by manufacturer part number and documented application. Selecting the specified inlet screens, seals, return tubes and retention components helps maintain the intended material intake arrangement.
Some Advantage, Impact and RentSpray models share individual suction components. However, similar appearance or membership in the same equipment family does not establish interchangeability.
Verify the exact sprayer model, stand or cart configuration, factory diagram and OEM part number before ordering.
Titan Advantage 400 Suction Set Maintenance and Safety
Before disconnecting the suction set, removing the inlet screen or servicing return-line connections, shut down the sprayer, disconnect electrical power and complete Titan's pressure-relief procedure.
Inspect intake components for debris, dried coating, cracks and damaged seals. Follow the manufacturer's cleaning and reassembly instructions, and use compatible cleaning fluids for the coating material.
Never loosen a pressurized fluid connection. High-pressure fluid can penetrate the skin and cause serious injury.
After service, verify that all connections and retaining components are secure, then check priming and operation using Titan's prescribed procedure.
Titan Advantage 400 Suction Set Assembly Parts FAQ
Answers to common questions about suction assemblies, inlet screens, return tubes, O-rings and model compatibility.
What parts are listed in the Titan Advantage 400 Suction Set Assembly?
The category lists eight products: suction set assembly 0558672A, return tube 0558659A, clip 0279459, inlet screen 700-805, O-ring 9871105, retaining clip 9822526, tie wrap 9850638 and O-ring 704-109.
What is the Titan Advantage 400 suction set assembly part number?
Titan 0558672A is the complete suction set assembly specified for the Advantage 400 stand and low-boy configurations.
What is the Titan Advantage 400 inlet screen part number?
Titan 700-805 is the inlet screen filter listed in the Advantage 400 suction set category. Verify its application in the factory diagram.
Does Titan 9871105 replace Titan 704-121?
Yes. The product listing identifies Titan 9871105 as an O-ring replacing Titan 704-121. Confirm the sealing location before ordering.
Why will my Titan Advantage 400 not prime?
Possible causes include a clogged inlet screen, damaged suction components, air leaks at intake connections or problems within the fluid section. Follow Titan's diagnostic instructions.
Does the upright cart Advantage 400 use the same suction set?
Titan's main assembly parts list specifies 0558672A for stand and low-boy configurations. The upright cart uses a separately listed siphon tube and return tube arrangement. Confirm the correct parts diagram.
Can I replace the inlet screen without replacing the complete suction set?
The inlet screen is listed separately as Titan 700-805. If the remaining components are serviceable, individual replacement may be appropriate under the manufacturer's instructions.
Where can I buy genuine Titan Advantage 400 Suction Set Assembly Parts?
Shop the Advantage 400 Suction Set Assembly Parts category at AllTitanParts. Use the exploded diagram to confirm the correct OEM part number before checkout.
Shop Titan Advantage 400 Suction Set Parts Today
Find genuine Titan suction assemblies, return tubes, inlet screens, O-rings and retaining hardware. Match the factory diagram and order the correct components for your Advantage 400 repair.
BUY ADVANTAGE 400 SUCTION SET PARTS →Need help identifying a replacement part? Call 713-931-0006.