OEM Titan Retaining Clip
Titan 9822526 Retaining Clip is an OEM spring-steel clip that secures suction tube components, shafts, pins, and bearings on compatible AirCoat Air-Assisted Airless Sprayers, Advantage, Impact, RentSpray, and SprayTech systems.
Compatibility Table
OEM retaining clip restores secure component retention, prevents axial movement, and ensures reliable operation.
Titan Retaining Clip Replacement
Titan 9822526 is an OEM retaining clip that secures components such as suction tubes, shafts, pins, and bearings, preventing axial movement on compatible AirCoat Air-Assisted Airless Sprayers, Advantage, Impact, RentSpray, and SprayTech systems.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Genuine Titan retaining clip made of spring steel, designed to snap into grooves and provide positive axial retention for components such as suction tubes, shafts, pins, and bearings. Used in pump assemblies, drive systems, and suction tube connections. |
| Material & Specifications | Spring steel (high-carbon steel) with zinc-plated or phosphate-coated finish per ASTM B633, Type III. Hardness: HRC 45-50. Tensile strength: minimum 180,000 psi (1,241 MPa). Operating temperature range: -40°F to 300°F (-40°C to 149°C). Provides 72+ hours salt spray resistance. |
| Dimensional Data | Groove diameter: 0.500 inches (12.7 mm) nominal. Groove width: 0.060 inches (1.5 mm). Free outside diameter: 0.625 inches (15.9 mm) ±0.010 inches. Thickness: 0.045 inches (1.14 mm) nominal. Axial retention force: 50-75 lbs (222-334 N). |
| Function | Prevents shafts, pins, and bearings from moving along their axis, holds components in correct alignment within assemblies, provides spring tension that maintains retention under dynamic conditions, and allows for service and replacement of retained parts. |
| Industrial Applications | Professional sprayer repair, suction system maintenance, pump rebuilds, drive system servicing, and rental fleet equipment repair. |
| Compatible Titan Machines | SprayTech AirCoat, Titan AirCoat Air-Assisted, AirCoat Spray System, Advantage 400/500/600, Impact 340/400/410/440/640/740/840/1040/1140, Impact X 410/440/540I, RentSpray 400/600, SprayTech EPX2155/EPX2255/EPX2355, Multi Finish Spray System 300, PowrLiner 1800M/2800M, Titan 440I/640I/740I/640IX/740IX. |
| Accurate Part Number | 9822526 Retaining Clip. |
| Related Parts Commonly Serviced Together | Siphon tube assembly (0558672A), return tube (0558659A), inlet filter (0295565), siphon elbow O-ring (9871105), and suction system components. |
| Compatible Shafts | Designed for use with 0.500-inch nominal shafts with ANSI/ASME B94.9 standard retaining ring groove dimensions. |
| Common Problems Solved | Missing clip causing component looseness, deformed or bent clip no longer holding shape, corrosion or rust weakening the clip material, fatigued clip with loss of spring tension, and excessive axial play in retained components. |
| Service Guidance | During repair or maintenance, always inspect retaining clips for distortion, corrosion, or wear. Replace any clip that appears compromised. Ensure the clip is fully seated in its groove during installation. Retaining clips are designed for single use and should always be replaced with a new clip during reassembly. Requires standard external retaining ring pliers with 0.090-inch tip diameter (Titan Tool P/N 704-021 or equivalent) for proper installation and removal. |
| Reuse Rating | Single-use only. Reinstallation may result in loss of spring tension (up to 40% reduction) and reduced retention force, potentially causing component loosening in service. |
| Use with Coating Systems | Supports AirCoat air-assisted airless sprayers and a wide range of Titan equipment for professional painting and industrial coating applications. |
| Commercial Benefits | Restores secure component retention, prevents axial movement and misalignment, ensures reliable operation, and prevents component loosening that can lead to operational failure. |
The 9822526 Retaining Clip is a spring-steel fastening component that secures suction tubes, shafts, pins, and bearings in airless sprayers. These clips snap into grooves to provide positive axial retention while allowing disassembly. Commonly found in suction and pump assemblies, drive systems, and wheel axles, clips can become fatigued, corroded, or dislodged over time. A failed clip allows components to shift, causing misalignment, wear, or mechanical failure. Replacing with genuine 9822526 ensures proper fit and retention. Always inspect clips for distortion or wear and replace compromised ones, ensuring full seating in the groove during installation.
Quick answers for confirming fitment, function, and service value.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
