Titan 700-805 Inlet Screen Filter
OEM Titan Filtration Component
Titan 700-805 Inlet Screen Filter is a genuine OEM stainless steel inlet screen that attaches to the siphon assembly on compatible Impact, Airless Sprayer, Advantage, Epic, PowrLiner, and RentSpray equipment, preventing sand and stones from entering the pump and protecting internal components from costly damage.
Compatibility Overview
Replace if the screen is clogged, torn, deformed, or if the sprayer exhibits reduced flow, frequent tip clogs, or loss of pressure.
Titan Filtration Component Replacement
Titan 700-805 Inlet Screen Filter for Sprayer Pump Protection
Titan 700-805 is a genuine OEM stainless steel inlet screen filter engineered to protect the pump from debris on compatible Titan airless sprayers and piston pumps. This critical filtration component attaches to the siphon assembly and traps sand, stones, and other contaminants before they can enter the fluid section, safeguarding valves, pistons, and packings from costly damage. Official Titan manuals for the PowrTex 1200SF, Impact 1040T, and Impact 1140 list "Remove the inlet screen and clean" as a standard troubleshooting and maintenance procedure. The part is a direct replacement for the original filter, with a 3/4" UNF thread and metal/plastic construction. Independent parts suppliers confirm compatibility across a wide range of models including the 330, 340, 440 series, 540IX, 550XC, 640 series, 660XC, 690GXC, 740 series, Impact X410/X440/X540/640, Advantage 400/500/600, Epic 447EX/660EX/447HPX/660HPX/690GX, PowrLiner 1800M/2800M, and RentSpray 450/600/650/Plus.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Genuine Titan OEM inlet screen filter for compatible airless sprayers and piston pumps. Attaches to the siphon assembly to prevent debris from entering the pump. |
| Function | Traps sand, stones, and other particulate matter before they reach the fluid section. Protects internal pump components including valves, pistons, and packings from abrasive wear and damage. |
| Material & Specifications | Stainless steel mesh with metal and plastic construction. 3/4" UNF thread. Weight: 0.03 lb (11 g). Country of Origin: USA. |
| Compatible Impact Models | X410, X440, X540 I, 640, 640 I/IA, 410, 400. |
| Compatible Airless Sprayer Models | 330, 340, 440, 440 I/IX, 440 XC, 540 IX, 550 XC, 640 I/IX, 660 XC, 690 GXC, 740 I/IX. |
| Compatible Advantage / Epic Models | Advantage 400, 500, 600; Epic 447EX, 660EX, 447HPX, 660HPX, 690GX, 690HPG. |
| Compatible PowrLiner / RentSpray Models | PowrLiner 1800M, 2800M; RentSpray 450, 600, 650, RentSpray Plus. |
| OEM Part Number | 700-805 Inlet Screen Filter. |
| Replacement Indicators | Clogged or damaged screen; reduced flow or pressure; frequent tip clogs; pump wear from sand and stones; visible tears, deformations, or debris buildup on the screen. |
| Related Parts Commonly Serviced Together | Siphon hose assembly (700-1023A), siphon elbow O-ring (9871105), retaining clip (9822526), hose clip (806-312), and pump filters. |
| Why Genuine OEM | Exact mesh size, thread specification, and material specifications ensure proper filtration and fit. A low quality or incorrect screen may allow debris to pass through or fail to seal properly, compromising pump protection. |
Inspect the inlet screen during routine maintenance. Remove and clean the screen if clogged, or replace if torn or deformed. A wrench may be needed for removal and installation. Always verify that the screen is properly seated before operating the sprayer. A clean inlet screen is essential for maintaining proper fluid flow and protecting the pump from debris-related damage.
Frequently Asked Questions
Quick answers for confirming fitment and identifying when replacement is needed.
No reviews yet. Be the first to review this product!