Shop Titan 440ix Siphon/Return Assembly Parts
Prepare your material-feed system for the next project with Titan 440ix Siphon/Return Assembly Parts. Browse genuine OEM intake and return components, identify the affected connection, and match the correct Titan replacement number to your machine before placing an order.
Find Your 440ix Siphon and Return Replacement
Work through the material path and inspect each connection. Choose the component that matches the repair, then review the product listing for supplied items and installation requirements.
Inspect the intake hose and attachment points. Check the assembly contents before ordering separate connection components.
Shop Titan 700-1023A Siphon Hose →Check the return line for damage, restrictions and insecure connections. Confirm its routing and fit before purchase.
View Titan 704-263A Return Hose →Inspect the intake screen for coating buildup or physical damage. Follow the approved cleaning procedure and replace a damaged screen.
Find Titan 700-805 Inlet Screen →Match the specified seal to its connection. Similar appearance does not establish the correct dimensions or material suitability.
Browse Titan 9871105 O-Ring →Inspect the fitting, mating surfaces and retention arrangement together. Select each replacement by its designated diagram position.
Check Elbow and Clip Numbers →Choose the Correct 440ix Siphon/Return Component
Identify the affected part before deciding between an assembly and an individual service item. Verify the replacement reference and package contents to avoid ordering unnecessary duplicates.
Record the model, serial number and relevant configuration details.
Locate the affected hose, screen, seal, elbow or retaining component.
Use the applicable breakdown and verify any current replacement reference.
Confirm which connection parts are included and which require separate purchase.
| Listed Component | Titan OEM Number | Diagram Position | Selection Check |
|---|---|---|---|
| Siphon hose | 700-1023A | 1 | Replacement reference for 700-1023 / 700-659 |
| Return hose assembly | 704-263A | 2 | Replacement reference for 0508605 / 704-263 |
| Inlet screen filter | 700-805 | 3 | Screen attachment and condition |
| O-ring | 9871105 | 4 | Replacement reference for 704-121 |
| Additional O-ring | 704-109 | 4A | Applicable seal specification and usage |
| Elbow | 700-1024 | 5 | Connection geometry and mating surfaces |
| Retaining clip | 9822526 | 6 | Designated retention location |
| Clip | 0279459 | 7 | Correct seating and component placement |
Inspect the Material Path Before Replacing Components
Priming and delivery symptoms can involve more than one system. Complete the prescribed checks for your machine before assuming that a hose or seal is responsible.
Check the material level, intake position and accessible restrictions. Continue with the model-specific troubleshooting sequence if the issue remains.
Inspect for physical damage and insecure attachment. Examine the connection surfaces before installing new components.
Follow the approved cleaning procedure. Replace parts that are damaged or cannot be adequately cleaned rather than bypassing filtration.
Check that the specified retaining components seat correctly. Inspect the retained connection for damage before returning the machine to service.
If basic intake checks do not resolve the issue, follow the remaining diagnostic steps to identify the actual repair required.
Service safety: Relieve system pressure and disconnect electrical power before removing components. Follow the equipment's approved cleaning, fluid-compatibility, grounding and ventilation instructions.
When diagnosis identifies a fault beyond the siphon and return components, open the relevant assembly section.
Titan 440ix Siphon/Return Assembly Parts FAQ
Review these common ordering and maintenance questions. Keep your machine details and required component number available for fitment assistance.
Have your model, serial number, diagram position and existing component number ready. Contact AllTitanParts for help identifying the appropriate replacement before ordering.
Call 713-931-0006 for Parts Assistance