Titan 1140ix Airless Sprayer | Filter Assembly P/N 800-900
Shop Titan 1140ix Filter Assembly Replacement Parts
Keep your sprayer's fluid filtration and pressure-control components in service with genuine Titan 1140ix Filter Assembly Parts (P/N 800-900). Shop OEM manifold filters, filter housings, filter screen adapters, support springs, PTFE seals, PrimeSpray valve assemblies and pressure transducers. Use the illustrated parts diagram to identify the correct replacement and order online at AllTitanParts.
Filter Assembly Overview
Buy Genuine Titan 800-900 Filter Assembly Parts Online
The Titan 800-900 Filter Assembly is part of the fluid-handling system on the Titan 1140ix Airless Sprayer. Its manifold filter helps capture debris before coating material continues through the spray system. The assembly also includes associated housing, sealing, priming and pressure-monitoring components.
A clogged filter element may restrict material flow and contribute to poor spray performance. Damaged sealing components may cause leakage, while faults involving the PrimeSpray valve or pressure transducer require separate diagnosis.
Use the Titan 1140ix Filter Assembly exploded diagram to match each part with its reference number. AllTitanParts lists 9 individual OEM replacement products for this assembly, allowing you to identify the component required for a targeted repair.
OEM Parts Directory
Titan 1140ix Filter Assembly Parts List
Find the filter, housing, valve or pressure-control component using its diagram reference and Titan OEM part number.
| Diagram Ref. | Titan Part Number | OEM Description |
|---|---|---|
| 1 | 800-705 | Filter Housing, replaces 800-905 |
| 3 | 730-067 | 60 Mesh Manifold Filter |
| 4 | 702-251 | Filter Screen Adapter |
| 5 | 757-105 | Filter Support Spring |
| 6 | 800-906 | PTFE O-Ring |
| 8 | 800-901 | Filter Base Housing |
| 9 | 700-258 | PrimeSpray Valve Assembly |
| 10 | 800-907 | NPTF Plug |
| 11 | 800-437 | Transducer Assembly |
Featured Replacement Parts
Shop Titan 1140ix Manifold Filters, Housings and Valves
Titan 730-067 60 Mesh Manifold Filter
The Titan 730-067 manifold filter uses a 60-mesh screen to capture debris in the fluid stream. Inspect and clean or replace it according to the coating requirements and Titan's service instructions.
OEM Part: 730-067Titan 800-705 Filter Housing
The Titan 800-705 Filter Housing replaces part number 800-905. Check the housing and mating sealing surfaces for damage before reassembly.
OEM Part: 800-705Titan 702-251 Filter Screen Adapter
The Titan 702-251 Filter Screen Adapter is a designated component in the filter assembly. Match diagram reference 4 before ordering.
OEM Part: 702-251Titan 757-105 Filter Support Spring
The Titan 757-105 Filter Support Spring supports the filter arrangement. Inspect it for deformation or damage when servicing the manifold filter.
OEM Part: 757-105Titan 800-906 PTFE O-Ring
The Titan 800-906 PTFE O-Ring is a sealing component listed at diagram reference 6. Use the specified replacement and inspect the sealing surfaces during service.
OEM Part: 800-906Titan 800-901 Filter Base Housing
The Titan 800-901 Filter Base Housing forms part of the filter assembly structure and connects with designated manifold components.
OEM Part: 800-901Titan 700-258 PrimeSpray Valve Assembly
The Titan 700-258 PrimeSpray Valve Assembly supports the sprayer's priming and spraying flow-path selection. Follow Titan's diagnostic instructions before replacing it.
OEM Part: 700-258Titan 800-437 Transducer Assembly
The Titan 800-437 Transducer Assembly is associated with pressure sensing. Have electrical and pressure-control faults diagnosed using the correct service procedure.
OEM Part: 800-437Fluid Filtration Overview
How the Titan 800-900 Filter Assembly Works
Filter the Material
The 60-mesh manifold filter captures particles that could otherwise travel farther through the fluid system.
Support and Seal
The filter housing, adapter, spring and PTFE O-ring serve their designated support and sealing functions.
Prime or Spray
The PrimeSpray valve assembly helps select the appropriate operating flow path.
Monitor Pressure
The pressure transducer provides a pressure-sensing function within the sprayer system.
Troubleshooting Guide
Common Titan 1140ix Filter Assembly Problems
Filter assembly symptoms may have several possible causes. Follow Titan's troubleshooting instructions and verify the fault before replacing components.
| Symptom | Parts to Inspect | Recommended Check |
|---|---|---|
| Restricted material flow | 730-067 Manifold Filter | Inspect for accumulated debris and clean or replace the filter as instructed. |
| Leakage around filter housing | 800-906 O-Ring, 800-705 Housing | Inspect the specified seal and housing surfaces for damage. |
| Filter does not seat correctly | 702-251 Adapter, 757-105 Spring | Check component placement and condition against the exploded diagram. |
| Difficulty switching between prime and spray | 700-258 PrimeSpray Valve | Inspect the valve system following the applicable service instructions. |
| Pressure reading or control fault | 800-437 Transducer | Have the pressure-sensing system diagnosed before replacing the transducer. |
| Damaged filter base or plug | 800-901 Base, 800-907 Plug | Identify the damaged component and confirm its OEM part number. |
Replacement Parts Buying Guide
How to Choose the Correct Titan 1140ix Filter Parts
Confirm Your Assembly
Verify that your Titan 1140ix uses the 800-900 Filter Assembly configuration.
Find the Diagram Reference
Locate the filter, housing, valve or sensor in the illustrated assembly.
Match the OEM Part
Compare the diagram number, part description and any listed replacement reference.
Purchase Online
Order the specified genuine Titan replacement part from AllTitanParts.
Filter Selection Guidance
Why the Correct Manifold Filter Mesh Matters
The Titan 730-067 60 Mesh Manifold Filter is the filter listed for this Titan 1140ix assembly. Filter mesh size influences the balance between particle capture and material flow. The appropriate mesh depends on the coating, spray tip and manufacturer's recommendations.
Do not assume that a finer or coarser filter is interchangeable with the specified 60-mesh element. Confirm any alternative filter through the applicable Titan documentation before installation.
Preventive Maintenance
Maintain Your Titan 800-900 Filter Assembly
Inspect the Filter Screen
Check the manifold filter for debris or damage at the intervals recommended by Titan.
Examine Sealing Components
Inspect the PTFE O-ring and mating surfaces when servicing the filter housing.
Keep Components Clean
Follow approved flushing procedures to reduce debris buildup in the fluid system.
Check Valve Operation
Inspect the PrimeSpray valve and related components when operational symptoms indicate a possible fault.
Related Titan 1140ix Categories
Shop More Titan 1140ix Replacement Parts
Browse related Titan 1140ix assemblies to find additional OEM replacement parts for complete sprayer maintenance and repair.
Titan 1140ix Main Assembly Parts
Shop main assembly components, fluid fittings, siphon-related parts, PrimeSpray components and mounting hardware.
Shop Main Assembly PartsTitan 1140ix Drive Assembly Parts
Find gearbox assemblies, drive gears, slide assemblies, motor components and electronic controls.
Shop Drive Assembly PartsTitan 1140ix Fluid Section Assembly Parts
Browse components for the Titan 800-300 fluid section, including piston rods, repacking kits, valve parts and seals.
Shop Fluid Section PartsTitan 1140ix High Rider Cart Parts
Shop replacement wheels, axle caps, handle sleeves and hardware for the Titan 800-600 High Rider Cart.
Shop High Rider Cart PartsTitan 1140ix Digital Airless Sprayer Parts
Return to the model category to explore other available Titan 1140ix assembly diagrams and parts.
Browse All Titan 1140ix PartsHigh-Pressure Filter Assembly Service Safety
Airless sprayers contain pressurized fluid that can cause serious injection injuries. Before removing a filter housing, plug, valve or transducer, switch off the equipment, disconnect electrical power and perform Titan's complete pressure-relief procedure. Never loosen pressurized components. Follow the applicable service manual and use qualified technicians for electrical repairs.
Genuine Titan Filter Assembly Components
Order Titan 1140ix Filter Assembly Parts Today
Find genuine Titan manifold filters, filter housings, sealing components, PrimeSpray valves and pressure transducers. Match the OEM number and order the correct replacement.
Shop Titan 1140ix Filter Assembly PartsFrequently Asked Questions
Titan 1140ix Filter Assembly Parts FAQ
What is Titan 800-900?
Titan 800-900 identifies the Filter Assembly covered by this Titan 1140ix parts diagram.
How many replacement products are listed?
The category lists 9 OEM replacement products, including a manifold filter, filter housings, adapter, spring, O-ring, PrimeSpray valve, plug and transducer.
What is the Titan 1140ix manifold filter part number?
Titan 730-067 is the 60 Mesh Manifold Filter listed at diagram reference 3.
What replaces Titan 800-905 filter housing?
Titan 800-705 is the listed replacement for Titan 800-905 Filter Housing.
What is the Titan 1140ix filter support spring number?
Titan 757-105 is the Filter Support Spring listed at diagram reference 5.
What is Titan 800-906?
Titan 800-906 is the PTFE O-Ring listed at diagram reference 6.
Which PrimeSpray valve is listed for this filter assembly?
Titan 700-258 is the PrimeSpray Valve Assembly listed at diagram reference 9.
What is the Titan 1140ix transducer part number?
Titan 800-437 is the Transducer Assembly listed at diagram reference 11.
Can I replace the filter screen without replacing the housing?
The Titan 730-067 manifold filter is listed individually. Whether only the filter needs replacement depends on the condition of the housing and associated components.
Where can I buy Titan 1140ix Filter Assembly Parts?
Shop Titan 1140ix Filter Assembly Parts (P/N 800-900) at AllTitanParts and use the exploded diagram to select the correct OEM part.
Titan OEM Parts Assistance
Need Help Finding Titan 1140ix Filter Parts?
Have your Titan 1140ix model, Filter Assembly number 800-900, diagram reference and existing OEM part number ready when requesting fitment assistance.
713-931-0006