PowrCoat AirCare System · Filter, Regulator and Lubricator Parts
Service the PowrCoat 745 Automatic Lubricator with Verified FRL Parts
Shop diagram-matched components for the PowrCoat 745 Automatic Lubricator Assembly, including the panel-mount nut, body connector, five-micron filter element, filter bowl, automatic drain kit, drip-control assembly, fill plug, lubricator bowl, regulator repair kit, and connector O-ring kit. Every retained part appears on the supplied page and in Titan’s official automatic-lubricator table.
How the PowrCoat 745 FRL Assembly Conditions Compressed Air
This page is an exploded Filter-Regulator-Lubricator replacement-parts category for PowrCoat 745 cart model 0533745C and wall model 0533745W. Titan’s official table uses the same FRL components on PowrCoat 730, 745, 940, 960, and 975.
Incoming compressed air passes through the filter element and moisture bowl, then through the regulating section and into the lubricator. The drip-control assembly meters lubricant from the reservoir into the outgoing air stream to support pneumatic-system durability.
Functions Supported by the Automatic Lubricator Assembly
- Removes particulate contamination from incoming compressed air.
- Collects and automatically drains separated moisture.
- Supports stable downstream air-pressure regulation.
- Meters lubricant into the air stream through the drip control.
- Seals and structurally connects the FRL body sections.
When Repair Teams Use This FRL Parts Diagram
- Air pressure drops across the conditioning assembly.
- Water accumulates or carries downstream toward the air motor.
- Air leaks develop at a bowl, connector, or regulator joint.
- Lubricant delivery becomes excessive, inconsistent, or stops.
- A bowl, filter element, fill plug, drain, or seal requires service.
PowrCoat 745 FRL Symptoms and Inspection Priorities
Confirm compressor capacity, hose condition, supply pressure, shutoff-valve position, gauge accuracy, and downstream leakage before opening the FRL assembly. Vent all stored pressure before service.
High-Value PowrCoat 745 Automatic Lubricator Parts
These cards include only genuine components listed on the supplied page and confirmed in Titan’s automatic-lubricator table.
Titan 0533917 Regulator Relieving Repair Kit
Official relieving-regulator repair kit for restoring pressure-control components when diagnosis confirms internal regulator wear or leakage.
Titan 0533918 Body Connector O-Ring Kit
Contains ten replacement O-rings for sealing FRL body connectors and correcting confirmed air leakage at connector interfaces.
Titan 0533910 Panel Mount Nut
The official position-1 nut securing the regulator section at the panel opening and maintaining correct FRL alignment.
Titan 0533909 Body Connector
The position-2 connector joins the filter, regulator, and lubricator bodies while preserving the compressed-air passage.
Titan 0533911 Filter Element
The official position-3 filter element removes particulate contamination from incoming compressed air before it reaches downstream controls.
Titan 0533915 Filter Bowl
The official position-4 bowl houses the filter element and collected moisture. The live product page identifies this component as discontinued by the manufacturer.
Titan 0533912 Automatic Drain Kit
The official position-5 drain kit removes accumulated moisture from the filter bowl and helps reduce water carryover into the air system.
Titan 0533914 Drip Control Assembly
The position-6 control regulates visible lubricant delivery into the compressed-air stream for downstream pneumatic components.
Titan 0533913 Lubricator Fill Plug
The official position-7 fill plug closes the lubricator service opening after approved air-tool lubricant is added.
Titan 0533916 Lubricator Bowl
The official position-8 bowl stores lubricant for the drip-control assembly and permits visual monitoring of lubricant level.
How to Select the Correct FRL Replacement Component
Identify the failed function
Separate filtration, regulation, drainage, sealing, and lubrication symptoms.
Match the diagram position
Use positions 1 through 8 or the two unnumbered service kits.
Inspect connected surfaces
Check bowl threads, connector faces, O-rings, passages, adjustment, and panel mounting.
Confirm availability
The verified 0533915 filter bowl is currently marked discontinued.
Maintenance Practices for Reliable Compressed-Air Conditioning
- Inspect and service the five-micron element before restriction reduces airflow.
- Drain accumulated moisture and confirm the automatic drain operates freely.
- Monitor regulated pressure under actual spraying load.
- Maintain the correct lubricant level and observe drip-control operation.
- Inspect bowls for cracks, clouding, thread damage, or chemical attack.
- Vent all pressure before removing bowls, plugs, connectors, or regulator parts.
Plan a Complete PowrCoat 745 FRL Repair
For air restriction or moisture problems, inspect the 0533911 element, 0533915 filter bowl, 0533912 drain kit, compressor separator, supply hose, and downstream air tube as one conditioning path.
For leakage, unstable regulation, or lubrication problems, inspect the panel nut, 0533909 body connector, 0533918 O-rings, regulator section, 0533914 drip control, 0533913 fill plug, 0533916 bowl, adjustment, lubricant level, and downstream consumption before ordering parts.
Shop Major PowrCoat 745 Automatic Lubricator Components
PowrCoat 745 Automatic Lubricator Assembly FAQs
Verified answers covering FRL function, model fitment, filter service, moisture drainage, regulation, sealing, lubrication, availability, and safe maintenance.