Shop Genuine OEM Titan ED655 PLUS Sprayer
Shop genuine OEM Titan ED655 PLUS airless paint sprayer, a compact, lightweight dedicated finishing system that solves the small project, big machine problem. Weighing only 27 pounds, the ED655 PLUS delivers up to 0.35 GPM and 2,800 PSI maximum operating pressure with a 1/2 HP TEFC motor, making it easy to transport and ideal for fine finish work. It handles oil-based and latex paints, primers, stains, sealers, and enamels with consistent pressure control and reduced pulsation. Select the correct ED655 PLUS configuration by matching coating requirements, required output, maximum tip size, sprayer capacity, and the applicable gun/hose setup.
Choose the Correct Titan ED655 PLUS Sprayer
Choosing ED655 PLUS technology is only the first step. This compact finishing system is engineered for specific project types and coating requirements. Select by coating + required output + maximum tip size + sprayer capacity + gun/hose setup + exact model number.
The ED655 PLUS is designed for those minor but important and profitable projects where most sprayers are either too big or too powerful. It is ideal for contractors handling small to medium-sized projects that require a dependable and portable finishing system. The ED655 PLUS is a smaller, lightweight system designed for smaller projects, and your coating requirements and jobsite conditions determine the right configuration.
Titan ED655 PLUS Specifications Guide
The chart below summarizes key specifications for the ED655 PLUS platform. Confirm the current orderable model number when selecting a sprayer, particularly where an updated packaged or suffixed number may be shown in parts channels.
| Specification | Value | Notes |
|---|---|---|
| Max Delivery Rate | 0.35 GPM | Up to 1.25 liters per minute |
| Max Operating Pressure | 2,800 PSI | 100 to 2,800 PSI working range |
| Max Tip Size (1 Gun) | 0.017 inch | Single gun configuration |
| Motor | 1/2 HP TEFC | Totally enclosed fan cooled |
| Weight | 27 lbs | Easy to transport and set up |
| Recommended Gallons Per Week | 20 to 50 gallons | Small to medium projects |
| Power Requirement | 15 amp minimum on 115 VAC | 60 Hz current |
How the Titan ED655 PLUS Works
The Titan ED655 PLUS uses a compact sealed hydraulic airless system with a diaphragm pump to push coating at high pressure through a spray tip, atomizing the material without compressed air. This precision power tool is designed for spraying many types of materials with proper operating instructions, maintenance, and safety information. The lightweight design makes it easy to transport, set up, and clean up, while delivering consistent and reliable performance for fine finish applications.
Sealed hydraulic system delivers consistent pressure for fine finish work.
Simplifies priming and keeps contractors on the job.
Releases a stuck lower ball valve without using a hammer.
Easy carry handle and stand mount for convenient transport and setup.
The ED655 PLUS comes complete with the RX-80 spray gun, SC-6+ Synergy 412 fine finish tip, 1/4 inch by 50 foot fluid hose, and 3/16 inch by 3 foot whip hose, making it ready to set up and start working. Actual performance in service still depends on coating viscosity, tip selection, operating pressure, and user technique.
Understanding ED655 PLUS Pressure Ratings
The ED655 PLUS is rated for a maximum operating pressure of 2,800 PSI, suitable for fine finish and light airless spraying.
The ED655 PLUS delivers up to 0.35 GPM, optimized for precision finishing rather than high-volume production spraying.
Do not interpret the maximum pressure rating as evidence that a sprayer should always operate at that pressure. Titan optimizes the ED655 PLUS for specific coating types and finish requirements. Every pressure-bearing component in the spray system must also remain within its own working-pressure rating; the complete system is limited by its lowest-rated component.
Titan ED655 PLUS vs Standard Airless Sprayers
| Buying Consideration | Titan ED655 PLUS | Standard Airless Sprayer |
|---|---|---|
| Technology positioning | Compact dedicated fine finish system | General purpose airless platform |
| Weight | 27 lbs, highly portable | Typically heavier, less portable |
| Best application | Fine finish, trim, cabinetry, touch-up | Large surfaces, production work |
| Recommended volume | 20 to 50 gallons per week | Higher volume capacity |
| Setup and cleanup | Easy transport, job setup, and cleanup | More involved setup and cleanup |
| Selection | Coating + output + tip size + sprayer capacity | Coating + output + tip size + sprayer capacity |
The ED655 PLUS is not automatically the correct technology for every application. Choose according to the coating, desired finish, production requirements, and equipment capability.
Titan ED655 PLUS Compatibility
Titan ED655 PLUS sprayers work with industry-standard airless guns, hoses, and fine finish tips. This describes the system interface; it should not be interpreted as a statement that the ED655 PLUS is suitable for every coating or application.
Compatible with the RX-80 gun and other standard airless guns with appropriate configuration.
Supports SC-6+ Synergy fine finish tips and other standard airless tips up to 0.017 inch.
Confirm the coating manufacturer permits the selected sprayer and tip configuration.
When Should You Service a Titan ED655 PLUS Sprayer?
ED655 PLUS sprayers are mechanical systems with wear components. Inspect the sprayer when pressure drops, the spray pattern loses definition, priming becomes difficult, or material consumption rises. Common service items include packings, piston rods, cylinders, inlet and outlet valves, filters, hoses, spray gun parts, and diaphragm pump components. The ED655 PLUS is engineered to be fully serviceable with common wear components replaceable individually to extend equipment life and reduce total ownership costs. The Easy-Flow suction valve and integrated outlet slide valve help simplify maintenance and reduce downtime. Actual service intervals vary with coating abrasiveness, operating pressure, cleaning, maintenance, and usage conditions.
How to Order the Correct Titan ED655 PLUS Sprayer
- Identify the coating and check the coating manufacturer's recommended sprayer range.
- Determine the required flow rate and production speed for your project size.
- Determine the maximum tip size needed for your application.
- Check the sprayer's maximum supported tip size and available output.
- Confirm the spray gun, hose, and tip configuration.
- Verify the current manufacturer ordering number for the platform.
- Check documented supersession information when replacing an older model.
- Order only after the sprayer configuration, equipment capability, and current part number are confirmed.
Physical similarity, the Titan brand name, or matching model names alone do not prove complete equipment or coating compatibility.
Compare Related Titan Spraying Equipment
ED655 PLUS is one part of Titan's broader professional spraying system. Compare the technology required for your coating and application before selecting an individual sprayer.
The safest way to select a Titan ED655 PLUS sprayer is coating + required output + max tip size + sprayer capacity + gun/hose setup + exact current model number. Choosing "ED655 PLUS" alone is not enough: confirm the fine finish tip compatibility and the 20 to 50 gallons per week volume fits your project scale.
FAQ Section
Use these answers to narrow the correct Titan ED655 PLUS configuration before ordering.