Titan Impact X 540i Filter Assembly Parts
Shop genuine Titan Impact X 540i Filter Assembly Parts to maintain your airless paint sprayer's fluid filtration and associated pressure-control components. Find OEM filter caps, 60-mesh filters, filter bowls, O-rings, bypass valve assemblies, pressure transducers and fluid fittings.
Whether you're replacing a clogged filter, repairing a leaking filter bowl or identifying a worn valve component, use the factory exploded diagram to select the correct Titan OEM replacement part.
Maintain Cleaner Material Flow and Reliable Sprayer Operation
The Titan Impact X 540i filter assembly helps remove debris from coating material as it travels through the sprayer's pressurized fluid system. Proper filtration helps reduce contamination reaching downstream components, including the spray hose, gun and tip.
The assembly also incorporates associated sealing, bypass and pressure-sensing components. These parts perform different functions and should be inspected according to the actual symptoms and the manufacturer's troubleshooting instructions.
AllTitanParts provides genuine Titan OEM replacement components identified by factory part number, helping contractors and equipment technicians locate the correct parts for their Impact X 540i.
Shop Titan Impact X 540i Filter Assembly Components
Find the factory-listed replacement components for servicing the filter assembly and its associated fluid-control connections.
Titan 2424933 Filter 60 Mesh
Genuine OEM filter element designed to capture debris in the applicable fluid filtration assembly. Inspect for clogging, damage and coating buildup.
Part Number: 2424933Titan 2424886A Filter Bowl
Replacement filter bowl that forms part of the fluid filtration enclosure. Inspect for cracks, damaged threads or sealing-surface problems.
Part Number: 2424886ATitan 2424931A Filter Cap
OEM filter cap used to close and secure the designated filter assembly. Inspect its condition and associated seal when leakage is present.
Part Number: 2424931ATitan 2440405 By-Pass Valve Assembly
Factory-listed bypass valve assembly associated with directing fluid through the sprayer's designated operating and return paths.
Part Number: 2440405Titan Impact X 540i Filter Assembly OEM Parts Reference
Match the following manufacturer part numbers with the factory diagram. The current category contains 10 diagram positions, with the same 60-mesh filter part number appearing at two positions.
| Titan Part Number | Replacement Component | Primary Function |
|---|---|---|
| 2424931A | Filter Cap | Filter assembly closure |
| 2424934 | O-Ring | Fluid connection sealing |
| 2424933 | Filter 60 Mesh | Debris filtration, listed at positions 3 and 4 |
| 2424886A | Filter Bowl | Filter enclosure component |
| 2427607A | Transducer | Pressure sensing |
| 700-537 | Gasket | Sealing component |
| 2440405 | By-Pass Valve Assembly | Fluid routing and bypass operation |
| 227-006 | 1/4-inch Outlet Fitting | Fluid outlet connection |
| 2442856 | Return Tube Fitting | Return-line connection |
Note: The number of diagram positions does not necessarily indicate the quantity of each component installed. Verify the numbered callout, OEM part number and equipment configuration before ordering.
How to Identify the Correct Filter Assembly Replacement Part
Identify the Symptom
Check for restricted flow, repeated tip clogging, fluid leakage or pressure-related problems.
Inspect the Assembly
Follow Titan's safety instructions before inspecting the filter, seals, bowl, valve or fittings.
Match the OEM Number
Use the numbered exploded diagram to identify the correct Titan replacement component.
Verify and Purchase
Confirm the model, part number, required quantity and component application before checkout.
Titan Impact X 540i Filter Assembly Troubleshooting Guide
Use these common conditions to determine which filter assembly components may require inspection.
| Observed Condition | Components to Inspect | Recommended Action |
|---|---|---|
| Frequent spray tip clogging | 60-mesh filter and upstream material supply | Inspect for contamination, damage or missing filtration components. |
| Reduced material flow | Filter element and fluid passages | Check for accumulated coating residue or restrictions. |
| Leak near the filter bowl | Filter bowl, cap and O-ring | Inspect for cracks, damaged threads and deteriorated seals. |
| Difficulty changing between operating modes | Bypass valve and related fluid connections | Follow the manufacturer procedure to diagnose valve operation. |
| Pressure indication or control irregularities | Transducer and related pressure-control system | Use Titan's electrical and pressure-control diagnostic instructions. |
| Leak at a hose or return connection | Outlet fitting, return fitting and mating connections | Inspect the connection and specified sealing arrangement. |
Filter Assembly, Suction Set or Fluid Section?
These systems perform different functions. Identifying the source of the problem helps prevent unnecessary parts purchases.
Filter Assembly
Inspect for clogged filtration components, filter bowl leakage, bypass valve problems and associated fluid connections.
Suction Set Assembly
Inspect when coating material cannot enter the pump properly because of intake restrictions, damaged tubes or air entering suction connections.
Fluid Section Assembly
Inspect pumping components, valves and seals when the intake and filtration paths are clear but pump-related problems remain.
How to Maintain Your Impact X 540i Filter Assembly
Inspect the Filter Element
Check for accumulated debris, damage or coating buildup. Clean or replace the filter according to Titan's instructions.
Check the Filter Bowl
Inspect the bowl, cap and sealing surfaces for damage, cracks or leakage.
Examine Seals and Fittings
Look for deteriorated O-rings, damaged gaskets and leakage around fluid connections.
Flush the Sprayer Correctly
Follow the specified flushing procedure to reduce dried coating deposits in the fluid system.
Explore Related Titan Impact X 540i Parts
When your repair involves another system, open the appropriate factory assembly category to identify its replacement components.
Why Choose Genuine Titan Impact X 540i Filter Parts?
Genuine Titan OEM replacement components are identified by manufacturer part number and intended equipment application. Selecting the specified filter elements, seals, valve components and fittings helps preserve the factory fluid-system arrangement.
Filter parts used across Titan sprayer models can look similar, but thread dimensions, filtration ratings, sealing arrangements and applications may differ. Do not assume interchangeability without checking the OEM reference.
Confirm the exact Impact X 540i configuration and the corresponding manufacturer part number before purchasing.
Impact X 540i Filter Assembly Maintenance and Safety
Before removing the filter cap, bowl, fittings or valve components, shut down the sprayer, disconnect electrical power and complete Titan's pressure-relief procedure.
Never loosen a pressurized fluid connection. High-pressure fluid can penetrate the skin and cause serious injury.
Follow the manufacturer's instructions for disassembly, cleaning, seal replacement, component orientation and reassembly. Electrical pressure-transducer service should be performed according to the applicable Titan diagnostic and repair procedures.
After servicing, inspect the assembled system for leakage and verify operation using the manufacturer-prescribed testing procedure.
Titan Impact X 540i Filter Assembly Parts FAQ
Answers to common questions about OEM filters, filter bowls, bypass valves, pressure transducers, seals and fitment.
What parts are listed in the Titan Impact X 540i Filter Assembly?
The category includes a filter cap, O-ring, 60-mesh filter, filter bowl, pressure transducer, gasket, bypass valve assembly, outlet fitting and return tube fitting. The 60-mesh filter appears twice in the diagram listings.
What is the Titan Impact X 540i 60-mesh filter part number?
Titan 2424933 is the genuine OEM 60-mesh filter listed in the Impact X 540i Filter Assembly category. Verify the diagram and filter specification before ordering.
What is the Titan Impact X 540i filter bowl part number?
Titan 2424886A is the OEM filter bowl listed for this assembly. Inspect the bowl and sealing surfaces if leakage or physical damage is present.
Why does my Titan Impact X 540i spray tip keep clogging?
Repeated clogging can result from contaminated coating material, a damaged or missing filter, incorrect filtration or debris elsewhere in the fluid path. Inspect the filter and related components before replacing parts.
What does Titan 2440405 By-Pass Valve Assembly do?
The bypass valve assembly is associated with controlling the designated fluid-routing and return functions of the sprayer. Follow Titan's instructions when diagnosing or replacing this component.
What is Titan 2427607A Transducer used for?
Titan 2427607A is a pressure transducer listed in this filter assembly category. It provides pressure-sensing functionality associated with the sprayer's control system.
Are Impact X 410, Impact X 440 and Impact X 540i filter parts interchangeable?
Some Titan OEM filter components may be shared between models, but interchangeability must be confirmed using the exact manufacturer part number and applicable factory diagram.
Where can I buy genuine Titan Impact X 540i Filter Assembly Parts?
Shop the Titan Impact X 540i Filter Assembly Parts category at AllTitanParts. Use the exploded diagram to locate the correct component and verify its OEM part number before checkout.
Shop Titan Impact X 540i Filter Assembly Parts
Find genuine Titan OEM 60-mesh filters, filter bowls, caps, seals, bypass valves and fluid fittings. Match the factory diagram to the correct part number and order the components needed for your repair.
BUY IMPACT X 540i FILTER PARTS →Need help identifying a replacement part? Call 713-931-0006.







