Titan Impact X 540i Suction Set Assembly Parts
Shop genuine Titan Impact X 540i Suction Set Assembly Parts for maintaining the material-intake system of your professional airless paint sprayer. Find OEM siphon tube assemblies, return tubes, inlet screen filters, O-rings, clips and retaining components.
Use the model-specific exploded parts diagram to identify the correct replacement, match the numbered callout with the Titan OEM part number and purchase the components needed for your repair.
Maintain Reliable Material Intake and Consistent Fluid Delivery
The Titan Impact X 540i suction set provides the material-intake path between the coating container and the sprayer's pumping system. Its components must remain correctly connected, unobstructed and properly sealed to support consistent material supply during priming and spraying.
A blocked inlet screen, damaged siphon tube, loose retaining clip or deteriorated O-ring can interfere with the intake system. Inspecting these components helps identify possible causes of poor priming, inconsistent material delivery or visible leakage.
AllTitanParts offers genuine Titan OEM replacement components identified by manufacturer part number, helping contractors and maintenance technicians select the correct parts for the Impact X 540i.
Shop Titan Impact X 540i Suction Set Components
Browse key material-intake and return-system replacement parts using their original Titan manufacturer part numbers.
Siphon Tube Assembly
Provides the intake passage through which coating material is drawn from the supply container toward the pump.
Titan 2426336Return Tube
Routes returning coating material through the designated return path during applicable sprayer operations.
Titan 2426337Inlet Screen Filter
Helps prevent larger debris and contaminants from entering the sprayer's material-intake system.
Titan 700-805Siphon Elbow O-Ring
Replacement sealing component for the applicable siphon connection.
Titan 9871105Titan Impact X 540i Suction Set OEM Parts Reference
Identify the replacement components listed for this suction set assembly. Match the part number to the applicable exploded-diagram callout before purchasing.
| Titan Part Number | Replacement Component | Primary Function |
|---|---|---|
| 2426336 | Siphon Tube Assembly | Coating material intake |
| 2426337 | Return Tube | Material return path |
| 2427391 | Clip | Component retention |
| 700-805 | Inlet Screen Filter | Intake debris screening |
| 9871105 | O-Ring, Replaces 704-121 | Siphon connection sealing |
| 9822526 | Retaining Clip | Connection retention |
| 704-109 | O-Ring | Fluid connection sealing |
Note: Confirm the correct part number, diagram callout and equipment configuration before ordering. Individual parts may be sold separately.
How to Identify the Correct Suction Set Replacement Part
Inspect the Suction System
Identify the damaged, blocked, loose, leaking or missing component.
Check the Factory Diagram
Locate the component in the Impact X 540i suction set exploded drawing.
Match the OEM Number
Compare the diagram callout with the corresponding Titan part number.
Verify and Purchase
Confirm the model, configuration, quantity and part number before checkout.
Titan Impact X 540i Suction Set Troubleshooting Guide
Material-intake problems can originate from restricted screens, damaged tubes, poor connections or pump-related issues. Use the following guide to identify components that may require inspection.
| Observed Condition | Components to Inspect | Recommended Action |
|---|---|---|
| Sprayer will not draw material | Siphon tube and inlet screen | Check for restrictions, dried coating and debris. |
| Difficult or slow priming | Siphon connections and O-rings | Inspect for damage, loose connections or possible air entry. |
| Inconsistent material supply | Inlet screen and suction tube | Check for partial blockage or restricted material flow. |
| Return tube is loose | Return tube and retaining components | Inspect clips, tube routing and connection security. |
| Leakage near suction connection | O-rings and adjoining fittings | Inspect sealing surfaces and replace damaged seals. |
| Priming problem remains after inspection | Fluid section and related pump components | Continue diagnosis using the applicable Titan service manual. |
Suction Set Problem or Fluid Section Problem?
Both assemblies participate in moving coating material through your Impact X 540i, but they perform different functions.
Suction Set Assembly
Inspect this system when troubleshooting material intake, blocked inlet screens, suction tube damage, air entering connections or loose return components.
Fluid Section Assembly
Inspect the fluid section when the suction path is clear but pump-related problems persist, including pressure generation, valve operation or internal pumping components.
How to Maintain Your Impact X 540i Suction System
Keep the Inlet Screen Clean
Inspect the inlet screen for debris and dried coating. Clean or replace it according to Titan's maintenance instructions.
Inspect Tubes and Seals
Check suction and return tubes, O-rings and connection areas for damage, wear or leakage.
Check Retaining Components
Inspect clips and retaining hardware for correct installation and secure component positioning.
Flush After Spraying
Follow the manufacturer's flushing procedure to help prevent coating residue from restricting material flow.
Explore Related Titan Impact X Parts
If the required replacement is not shown in the suction set diagram, explore related machine assemblies or compare parts for other Impact X models.
Why Choose Genuine Titan Impact X 540i Suction Set Parts?
Genuine Titan OEM replacement components are identified by manufacturer part number and designated equipment application. Selecting the specified suction tubes, filters, seals and retaining components helps preserve the intended material-intake configuration.
Some Titan sprayer models use similar-looking suction tubes, inlet screens and connection hardware. However, visual similarity alone does not establish compatibility.
Verify the exact Titan part number, model designation and applicable diagram before purchasing.
Impact X 540i Suction Set Maintenance and Safety
Before inspecting or replacing suction-system components, shut down the sprayer, disconnect electrical power and complete Titan's pressure-relief procedure. Never disconnect a fluid connection while the equipment remains pressurized.
Follow the applicable manufacturer instructions for cleaning, flushing, disassembly, installation and reassembly. Replace damaged O-rings, tubes, filters or retaining components with the correctly specified parts.
After servicing, verify that the suction and return components are correctly installed and check for leakage during the manufacturer's prescribed operational test.
Titan Impact X 540i Suction Set Assembly Parts FAQ
Find answers about genuine OEM suction components, replacement part numbers, priming problems and compatibility.
What parts are included in the Titan Impact X 540i suction set assembly?
The category lists a siphon tube assembly, return tube, clip, inlet screen filter, two O-rings and a retaining clip. These components support the material-intake and return system.
What is the Titan Impact X 540i siphon tube assembly part number?
Titan 2426336 is the siphon tube assembly listed for the Impact X 540i suction set.
Which inlet screen fits the Titan Impact X 540i?
Titan 700-805 is the inlet screen filter listed for this suction set assembly. Verify the diagram callout and model before purchasing.
Why is my Titan Impact X 540i not drawing paint?
Possible causes include a blocked inlet screen, restricted siphon tube, loose suction connection, damaged seal or an issue elsewhere in the pumping system. Follow Titan's troubleshooting instructions to identify the cause.
What is the Titan Impact X 540i return tube part number?
Titan 2426337 is the return tube listed in the Impact X 540i suction set category.
Does Titan 9871105 replace Titan 704-121?
Yes. The category identifies Titan 9871105 as an OEM O-ring replacement for Titan 704-121. Confirm the intended sealing location before installation.
Are Impact X 410 and Impact X 540i suction parts interchangeable?
Some OEM part numbers may be shared between models, but interchangeability must be confirmed using the exact Titan part number and applicable manufacturer parts diagram.
Where can I buy genuine Titan Impact X 540i suction set replacement parts?
Browse the Titan Impact X 540i Suction Set Assembly Parts category at AllTitanParts. Match the numbered exploded-diagram callout with the OEM part number before placing your order.
Shop Titan Impact X 540i Suction Set Assembly Parts
Find genuine Titan OEM siphon tube assemblies, return tubes, inlet screens, O-rings and retaining clips. Match the correct part number to the factory diagram and order the components needed to service your sprayer.
BUY IMPACT X 540i SUCTION SET PARTS →Need help identifying a replacement part? Call 713-931-0006.