2424933 Filter 60 Mesh is a genuine OEM replacement filter element for Titan airless sprayers. This 60‑mesh filter captures medium‑size contaminants, dried coating particles, and debris before they reach the spray tip, ensuring a clean finish and preventing tip clogging. A clogged or damaged filter reduces flow, causes poor atomization, and can lead to uneven spray patterns. Replacing the filter restores proper fluid filtration and consistent coating quality.
| Part Number | 2424933 |
|---|---|
| Part Description | Filter 60 Mesh (60‑mesh screen filter element) |
| Brand | Titan |
| Fits | Impact X 540i, 440, 410 |
| Condition | New |
The Titan 2424933 Filter 60 Mesh is a fine filtration element designed to capture medium‑sized particles (approximately 250 micron opening) from the coating fluid before it reaches the spray tip. It installs in the fluid filter housing and provides a balance between flow rate and filtration fineness, making it suitable for a wide range of coatings including paints, primers, and stains.
Over time, the 60‑mesh filter can become loaded with debris, causing flow restriction and pressure drop. A clogged filter leads to reduced output, spitting, poor atomization, and tip clogging. Replacing the filter with an OEM 60‑mesh element ensures consistent performance and a defect‑free finish.
| Contaminant capture | Traps medium particles (approx. 250 micron) before the tip |
|---|---|
| Tip protection | Reduces tip clogging and extends tip life |
| Finish quality | Removes particles that cause surface defects |
| Reduced flow / pressure drop | Sprayer output weakens or pressure drops |
|---|---|
| Frequent tip clogging | Tips clog more often than normal |
| Visible debris on filter | Inspection shows heavy loading or damage |
| Routine maintenance | Replace every 25‑50 gallons or after heavy use |
Part 2424933 is the OEM 60‑mesh filter for the following Titan sprayer models. Always verify with your machine's parts diagram.
| Brand / Model | Component |
|---|---|
| Impact X 540i | Filter 60 Mesh |
| Impact X 440 | Filter 60 Mesh |
| Impact X 410 | Filter 60 Mesh |
When replacing the filter, inspect or replace these related components.
Inspect for cracks or damage that could bypass the filter.
If the filter was clogged, the tip may also be partially blocked; clean or replace.
Coarse strainer at the siphon tube; clean regularly to protect the fine filter.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
