PowrTwin 3500 Outlet 2 Gun Manifold

PowrTwin 3500 – Outlet 2‑Gun Manifold

Ready to increase your output or service larger jobs? This category covers the Outlet 2‑Gun Manifold for the PowrTwin 3500, built to allow two spray guns to operate simultaneously from one machine. Browse genuine Titan parts for correct fit, safe operation, and upgraded flexibility.

Why Choose Genuine PowrTwin 3500 Outlet 2‑Gun Manifold Parts?

• Specifically designed for the PowrTwin 3500 model so porting, pressure ratings, fittings and layout match the machine’s specifications.
  
  
• Enables dual‑gun operation—great for high‑production jobs where two operators or two guns reduce downtime and increase efficiency.
  
  
• Genuine manifold parts ensure safe, reliable flow and prevent problems like leaks, uneven pressure or compatibility issues with other components.
  
  
• Using OEM ensures that the manifold matches the machine’s hydraulic/fluid system ratings—important for maintaining warranty and performance.
  
  
• Backed by our parts expertise so you get the correct manifold or associated fittings (plugs, nipples) for your setup.
  
  

Our Range of Outlet 2‑Gun Manifold Components

Explore the parts listed under this sub‑category (each item links to its product page for full specs & purchase):

• Pipe Plug – Part # 227‑027 – ¼″ NPT(M) pipe plug for manifold adjustments.
  
  
• Nipple Hex 3/8″(M)×3/8″(M) – Part # 814‑004 – a genuine manifold fitting used in dual‑gun setups.
  
  

Pro Tip: When converting or upgrading to a 2‑gun manifold, ensure your hoses, gun tips, and fluid supply also match the increased flow rate—otherwise one gun may starve, or manifold pressure may drop.

How to Choose the Right Outlet 2‑Gun Manifold Part

Here’s how to decide what you need:

• Determine your job requirements: If you plan to run two guns simultaneously (e.g., two operators or two spray locations), then the 2‑gun manifold is appropriate. If only one gun, ensure you’re using the correct single‑gun manifold or a manifold port plugged correctly.
  
  
• Confirm your model and setup: Make sure you are using the PowrTwin 3500 and check the existing manifold/fittings before buying. For example, if you already have a manifold with one port plugged, you may only need the additional manifold port hardware.
  
  
• Choose full manifold vs accessory fittings: If you’re adding 2‑gun capability from scratch, the full manifold assembly is ideal. If you already have dual‑gun manifold but need a specific fitting (plug, nipple), select that individual part.
  
  
• Check flow, pressure and hose/gun compatibility: Dual‑gun operation increases fluid demand—verify your pump, hoses, tips and manifold are matched to handle the flow without dropping pressure or compromising spray pattern.
  
  
• Plan installation and safety: Dual‑gun systems place increased demands on the manifold, joints and hoses—use correct torque, inspect for leaks, confirm flow‐balance between guns, and test before full production.
  
  

FAQs

What does the “Outlet 2‑Gun Manifold” category cover for the PowrTwin 3500?

This category includes the manifold block or accessories used on the PowrTwin 3500 to enable dual‑gun operation—such as pipe plugs, nipples, and any manifold hardware designed for a 2‑gun setup.

Why would I need a 2‑gun manifold on my PowrTwin 3500?

A 2‑gun manifold allows two spray guns to draw fluid simultaneously from one machine, which boosts productivity on large jobs, allows two spray operators or two spray locations, and reduces time compared to single-gun-only operation.

Can I convert my existing PowrTwin 3500 single‑gun manifold to a 2‑gun one with just fittings?

Depending on your current setup, you may only need the additional manifold port and fittings (like a nipple or plug) to convert. But you must ensure your pump, hoses and gun tips are rated for the increased flow that two guns will demand.

Are genuine manifold parts necessary, or can I use aftermarket parts?

Using genuine manifold parts is strongly recommended for safety, correct porting, pressure rating, and compatibility. Aftermarket parts may have incorrect flow paths, poorer materials, or lower pressure ratings which can affect performance and safety.

How do I ensure both guns in a 2‑gun setup are balanced and performing well?

Ensure that both hoses are the same length and diameter; both gun tips are the same size; the manifold ports are delivering equal flow; check spray pattern on each gun; monitor pressure drop when both guns are operating; adjust if one gun is weaker or starved.

Ready to Upgrade to a 2‑Gun Setup?

Browse our full collection of PowrTwin 3500 outlet 2‑gun manifold components above and select the exact part or upgrade you need. If you’re unsure which part number fits your machine or how to configure the dual‑gun setup safely, contact our support team — we’ll help you identify the correct configuration and get your machine operating at higher productivity.