PowrCoat 1072 · Model 05331072C · 72:1 · 7,200 PSI
Protect the PowrCoat 1072 Air Motor With Clean, Regulated and Lubricated Air
Shop verified FRL parts including the regulator repair kit, 5-micron filter, automatic drain kit, drip control, lubricator bowl and body-connector O-ring kit.
Eight-position exploded pneumatic air-preparation replacement-parts category
Diagram positions retained only when confirmed.
Inspect the complete component group.
No more than six active links.
PowrCoat 1072 Automatic Filter Lubricator Regulator Assembly
The AirCare assembly filters compressed air, regulates inlet pressure, removes collected moisture and meters lubricant before air reaches the motor. Discontinued filter bowl 0533915 is retained only as a documented diagram position and is not linked as a product.
Verified component index: 0533917, 0533910, 0533909, 0533911, 0533915, 0533912, 0533914, 0533913, 0533916, 0533918
Functions Supported by the Assembly
- Filters incoming air through a 5-micron element.
- Regulates pneumatic pressure.
- Automatically drains collected moisture.
- Meters lubricant through the drip-control assembly.
- Seals connected FRL bodies with dedicated O-rings.
Service Applications
- Correcting unstable regulated pressure.
- Servicing restricted airflow.
- Repairing automatic-drain problems.
- Restoring lubricant metering.
- Replacing leaking FRL connector seals.
Troubleshooting
Relieve all air and fluid pressure. Inspect genuine components shown on this page and diagnose the actual failure before replacement.
High-Value Replacement Parts
Only active products verified on the supplied category and matched to working internal destinations are linked.
Titan 0533917 Regulator Repair Kit
Regulator service kit.
Titan 0533911 Standard 5-Micron Filter
Compressed-air filter element.
Titan 0533912 Automatic Drain Kit
Automatic moisture-drain service kit.
Titan 0533914 Drip Control Assembly
Lubricator metering component.
Titan 0533916 Lubricator Bowl
Lubricant reservoir bowl.
Titan 0533918 Body Connector O-Ring Kit
FRL connector seal kit.
Buying Guide
Confirm the assembly
Use the exact PowrCoat 1072 diagram.
Match the callout
Check part number and component name.
Inspect mating parts
Find the true failure point.
Order verified fitment
Exclude discontinued or uncertain items.
Maintenance
- Relieve all stored pressure before service.
- Keep air and coating passages clean.
- Inspect seals and mating surfaces together.
- Check fasteners and connections for alignment.
- Record model, part number and service date.
- Replace only after confirming the fault.
Repair Planning
Record the exact model, diagram position, symptom and affected connection before disassembly. Photograph routing and orientation where useful, then inspect every mating pair so the repair addresses the cause rather than only the visible symptom.
Fast Navigation
FAQ Section
Repair the PowrCoat 1072 With Verified Information
Use the exact part number, diagram position and operating symptom to narrow the correct replacement.
- Titan part number
- Assembly callout
- PowrCoat 1072 model
- Component or repair-kit name
- Operating symptom