Titan Impact 740 & 840 Accessories
Shop genuine OEM Titan Impact 740 & 840 Accessories for configuring, maintaining, and supporting your airless spray system. Find compatible spray guns, high-pressure hoses, airless spray tips, tip guards, extensions, filters, fittings, and related equipment. Verify the exact Titan part number, pressure rating, connection, model application, and accessory requirements before ordering.
Find the Right Impact 740 & 840 Accessories
The right accessories help complete the spray-delivery system connected to your Titan Impact sprayer. Depending on the job and equipment configuration, the system may include a compatible spray gun, high-pressure hose, airless tip, tip guard, extension, filtration component, fitting, connector, or other approved accessory.
Do not select an accessory by appearance alone. Confirm the Titan part number and verify compatibility with the exact Impact 740 or Impact 840 configuration, including applicable pressure ratings, connection requirements, tip or guard compatibility, and intended spraying application.
Shop Impact 740 & 840 Accessories by Application
Start with the part of the spray system you are configuring or servicing, then verify the exact Titan accessory specifications required for your equipment.
Choose the appropriate Titan airless spray gun for the intended application and confirm its pressure rating, inlet connection, hose compatibility, tip system, and sprayer requirements.
Select a compatible tip family and size according to the coating, desired spray pattern, material flow requirements, gun, guard, and equipment capability.
Match the guard to the applicable spray gun and tip system. Confirm compatibility rather than assuming all reversible tips and guards use the same arrangement.
Verify hose pressure rating, length, diameter, fittings, connections, and intended application before connecting a replacement or additional hose.
Use compatible extension equipment where appropriate for the application, while confirming connection, pressure rating, gun compatibility, and operating requirements.
Select filtration components according to their intended location in the spray system and confirm the correct part number, fit, and application.
Confirm thread type, connection size, pressure rating, orientation, and intended system location before installing fluid fittings or connectors.
Review additional genuine Titan equipment and accessories according to the job, sprayer configuration, coating, and manufacturer's application guidance.
Find Your Impact 740 & 840 Accessories Faster
Accessory selection depends on more than the sprayer model. Use these four checks to narrow the correct Titan component for your setup.
Identify the exact Titan Impact 740 or Impact 840 model and machine configuration.
Determine whether you need a gun, hose, tip, guard, extension, filter, fitting, or another accessory.
Verify applicable pressure ratings, connections, sizes, accessory-system compatibility, and application requirements.
Confirm the exact Titan OEM part number and documented application before ordering.
Need a Gun, Hose, Tip, Guard, or Extension?
Start with the job requirement, then verify the complete accessory chain. A compatible spray setup requires the sprayer, hose, gun, guard, tip, fittings, and other connected components to be suitable for the intended operating conditions.
Do not assume that a component is suitable simply because its threads connect or it resembles an existing accessory. Confirm the Titan part number, documented compatibility, connection requirements, and applicable pressure rating before use.
Impact 740 & 840 Accessory Selection Guide
| Accessory | Verify Before Ordering | Why It Matters |
|---|---|---|
| Spray Gun | Pressure rating, inlet connection, tip system and application | Helps ensure the gun is appropriate for the connected spray system |
| Airless Tip | Tip family, size, guard, coating and equipment capability | Tip selection affects spray pattern and material delivery |
| Tip Guard | Gun connection and compatible tip system | The guard must match the intended gun and tip arrangement |
| High-Pressure Hose | Pressure rating, fittings, diameter, length and application | The hose must be suitable for the connected high-pressure system |
| Extension | Pressure rating, connection, gun compatibility and length | Ensures the extension is appropriate for the intended spray setup |
| Filter | Part number, filtration location and system application | Incorrect filtration components may not fit or perform as intended |
| Fitting or Connector | Thread, size, pressure rating, orientation and application | Correct connection details are essential in a pressurized fluid system |
Build the Accessory System Around the Application
Consider the coating manufacturer's application guidance and choose a suitable tip size and spray pattern within the capability of the sprayer and spray gun.
Match the spray gun, tip guard, and reversible tip system according to Titan's documented accessory requirements.
Confirm hose pressure rating, diameter, length, fittings, and connections for the intended spray configuration.
Use the correct filtration components for their intended system location and keep the fluid path clean according to Titan maintenance procedures.
Inspect Connected Accessories as a Complete System
Inspect applicable hoses, fittings, gun components, guards, tips, extensions, and connections for visible wear, damage, leakage, or improper assembly.
Follow Titan cleaning and maintenance instructions and replace damaged or worn components with correctly identified compatible parts.
Verify that newly installed accessories are properly connected, rated for the application, and functioning correctly before returning the sprayer to normal service.
Find the Correct Impact 740 & 840 Parts Section
| Need | Parts Section | Primary Use |
|---|---|---|
| Guns, hoses, tips & related equipment | Accessories | Completes and supports the spray-delivery system |
| Primary machine components | Main Assembly | Major components identified on the main assembly drawing |
| Mechanical drive components | Drive Assembly | Transfers mechanical motion toward the pumping system |
| Pump repair components | Fluid Section | Moves and pressurizes coating material |
| Fluid filtration components | Filter Assembly | Provides filtration within the pressurized fluid path |
| Low Rider intake components | Siphon Assembly | Supplies coating material toward the pumping system |
Use Impact 740 & 840 Accessories Safely
Airless spray equipment operates under high fluid pressure. Use only components suitable for the equipment and application, and never exceed the pressure rating of the lowest-rated component in the connected system.
Shut down the sprayer and follow Titan's complete pressure-relief procedure before installing, removing, inspecting, or servicing the spray gun, hose, tip, guard, extension, filter, fitting, or other pressurized accessory. Follow all applicable Titan operating and safety instructions.
Confirm Compatibility Before Ordering
An accessory that physically connects to the sprayer is not automatically correct for the application. Pressure rating, connection type, tip system, hose configuration, coating requirements, and the specific accessory's intended use can all affect compatibility.
Verify the exact Titan OEM part number and review the applicable Titan documentation for your Impact 740 or Impact 840 before purchasing or installing an accessory. When replacing an existing component, use its confirmed part number whenever possible.
Explore More Titan Impact 740 & 840 Parts
Need an internal repair component instead of an accessory? Use the related assembly sections below to move directly to the appropriate Impact 740 and Impact 840 parts area.
Shop Titan Impact 740 & 840 Accessories
Find genuine Titan OEM spray guns, hoses, airless tips, tip guards, extensions, filters, fittings, and related accessories. Verify the exact Titan part number, compatibility, connection, and pressure rating before ordering.
Shop Impact 740 & 840 AccessoriesTitan Impact 740 & 840 Accessories FAQs
What accessories are available for Titan Impact 740 and 840 sprayers?
Depending on the exact model and application, Titan accessory categories can include compatible spray guns, high-pressure hoses, airless tips, tip guards, extensions, filters, fittings, connectors, and related spray equipment.
How do I choose the correct airless spray tip?
Select the tip according to the coating, desired spray pattern, material-flow requirement, compatible gun and guard system, and the capabilities of the sprayer. Follow the coating and equipment manufacturers' recommendations.
Can I use any high-pressure hose with an Impact 740 or 840?
No. Confirm that the hose is intended for airless spraying and verify its pressure rating, fittings, connections, diameter, length, condition, and suitability for the intended system.
Are all Titan tip guards compatible with every Titan spray tip?
Compatibility depends on the spray gun, guard design, and tip system. Confirm the intended Titan tip and guard combination before ordering or installation.
What should I verify before ordering a fitting or connector?
Confirm the exact Titan part number, thread or connection type, size, pressure rating, orientation, intended system location, and compatibility with the connected components.
Can I identify an Impact accessory by appearance alone?
No. Similar-looking guns, hoses, tips, guards, fittings, and filters may have different ratings, dimensions, connections, applications, or part numbers. Verify the exact Titan OEM part number and documented application.
Should I replace a damaged high-pressure hose?
A high-pressure hose showing damage, leakage, or other unsafe conditions should not remain in service. Follow Titan inspection and replacement guidance and use a correctly rated compatible replacement.
Where can I find internal Impact 740 and 840 repair parts?
Use the applicable Main Assembly, Drive Assembly, Fluid Section, Filter Assembly, Low Rider Cart, Siphon Assembly, Upright Cart, and other model-specific parts sections for internal repair components.