Titan Advantage 500 Gear Box Assembly Parts
Find genuine Titan Advantage 500 Gear Box Assembly Parts for repairing the mechanical drive, pressure-control and electrical control components of your electric airless paint sprayer. Shop crankshaft and gear assemblies, sliders, thrust washers, mechanical controls, pressure knobs, switches, transducers and mounting hardware.
Use the Advantage 500 exploded gearbox diagram to identify factory replacement part numbers, compare compatible components and purchase the parts needed for a properly diagnosed repair.
Keep Your Titan Advantage 500 Drive System Operating Correctly
The Titan Advantage 500 gearbox transfers power from the electric motor to the sprayer's reciprocating fluid section. Its gears, crankshaft and slider work together to convert motor rotation into the pumping movement required for airless spraying.
The gearbox assembly diagram also includes pressure-control and electrical components mounted around the drive housing. These include the mechanical control assembly, pressure control knob, transducer, circuit breaker, power switch, microswitch and motor controller assembly.
Worn drive components may cause unusual mechanical noise, vibration, restricted movement or failure of the pump mechanism. Problems with pressure regulation or electrical operation can produce similar symptoms but may require a different repair.
AllTitanParts helps customers identify genuine Titan replacement components by manufacturer part number. Use the factory illustration to determine which component requires attention before purchasing a replacement.
Shop Key Titan Advantage 500 Gearbox Replacement Parts
Find essential drive and control components identified in the Titan Advantage 500 gearbox diagram.
Titan 0508572 Crankshaft/Gear Assembly
Factory replacement crankshaft and gear assembly that transfers drive motion through the gearbox to the pump mechanism.
Part Number: 0508572Titan 0508208 Slider Assembly
OEM slider assembly used in the mechanical drive linkage. Inspect when abnormal movement or component wear is suspected.
Part Number: 0508208Titan 704-176 Second Stage Gear
Factory-listed gear for the reduction drive system. Confirm tooth condition and associated component wear during inspection.
Part Number: 704-176Titan 0551520 Mechanical Control Assembly
Mechanical control assembly associated with the pressure-control mechanism. Verify included parts and the correct sprayer configuration before ordering.
Part Number: 0551520Titan Advantage 500 Gear Box Assembly OEM Parts Reference
The following components are listed on the Advantage 500 gearbox category page. Diagram numbers are shown where available. Additional items in the complete factory illustration may not be individually listed for purchase in this category.
| Diagram Item | Titan Part Number | OEM Component | Application / Function |
|---|---|---|---|
| 1 and 22 | 700-139 | Motor Baffle Screw | Factory fastening hardware |
| 3 | 0508208 | Slider Assembly | Mechanical drive linkage |
| 4 | 0508572 | Crankshaft/Gear Assembly | Drive transmission |
| 5, assembly listing | 0551520 | Mechanical Control Assembly | Control subassembly; not the item 5 thrust washer |
| 5, factory diagram | 704-174 | Thrust Washer | Axial spacing and load support |
| 6 | 704-176 | Second Stage Gear | Gear reduction |
| 7 | 0509219 | Screw | Mounting hardware |
| 8 | 700-771 | Pressure Control Knob | Operator pressure adjustment |
| 9 | 0551522 | Knob Housing | Mechanical control housing |
| 10 | 02712 | Knob Spring | Pressure control mechanism |
| 11 | 9822522 | Retainer Ring / Washer | Control mechanism retention |
| 12 | 806-032 | Plunger | Mechanical control component |
| 13 | 704-499 | Power Cord Assembly | Stand configuration; verify model |
| 14 | 9800340 | Ground Screw | Electrical grounding connection |
| 15 | 0551112 | Pressure Transducer Assembly | Pressure sensing |
| 16 | 765-327A | Circuit Breaker, 15 Amp | Electrical circuit protection |
| 17 | 9850936 | Power Switch | ON/OFF operation |
| 19 | 0295490 | Microswitch | Electrical switching |
| 20 | 9800604 | Screw | Control assembly fastening |
| 21 | 704-281 | Plug / Grommet | Designated opening protection |
| 23 | 0523527A | Motor Controller / Heat Sink Relay Assembly | Motor control electronics |
How the Advantage 500 Gear Box Assembly Works
Gear Reduction
The second-stage gear and crankshaft/gear assembly transfer rotational power from the motor through the drive mechanism.
Reciprocating Motion
The crankshaft and slider convert the drive movement into the reciprocating action required by the pump's fluid section.
Pressure Regulation
The pressure control mechanism and associated electronic components regulate motor operation in response to pressure demand.
How to Identify the Correct Titan Gearbox Replacement Part
Confirm Your Model
Check the Titan Advantage 500 identification label and confirm your equipment configuration.
Identify the Problem
Determine whether the issue involves gears, slider movement, pressure controls or electrical operation.
Match the OEM Number
Compare the manufacturer diagram with the exact Titan part number in the product listing.
Verify and Order
Confirm compatibility, configuration, superseded numbers and any required service hardware.
Titan Advantage 500 Gearbox Troubleshooting Guide
Use these symptoms to identify possible inspection areas. Similar operating problems can originate in the motor, gearbox, fluid section or control system.
| Observed Condition | Components to Inspect | Recommended Approach |
|---|---|---|
| Grinding or unusual drive noise | Crankshaft/gear assembly, second-stage gear, thrust washer and slider | Stop operation and inspect the drive mechanism for wear or damage. |
| Motor runs but pump does not stroke | Gearbox, slider, crankshaft and fluid section connection | Determine whether drive motion reaches the pump before replacing parts. |
| Pump movement is irregular | Slider assembly, crankshaft and connected fluid section | Inspect for mechanical binding and wear. |
| Pressure adjustment is unresponsive | Pressure knob, mechanical control, transducer and control electronics | Follow Titan's pressure-control diagnostic procedure. |
| Sprayer will not power on | Power supply, circuit breaker, switch, motor controller and wiring | Have electrical faults diagnosed by an authorized service center. |
| Sprayer runs but does not build pressure | Fluid section, suction system, valves and pressure controls | Diagnose the full pumping system before assuming gearbox failure. |
Plan Your Titan Advantage 500 Gearbox Repair
Mechanical Drive Parts
Inspect the slider, crankshaft/gear assembly, second-stage gear and thrust washer when a mechanical drive problem is confirmed.
Pressure-Control Parts
Check the control knob, mechanical control assembly, transducer and related components when pressure regulation is faulty.
Electrical Components
Electrical repairs involving switches, circuit breakers, power cords or motor controllers should be handled by qualified authorized service personnel.
Explore Related Titan Advantage 500 Assemblies
Use dedicated parts diagrams to identify components connected to the gearbox and pressure-control system.
Need the complete model directory? Browse Titan Advantage 500 Electric Piston Pump Parts.
Why Choose Genuine Titan Advantage 500 Gear Box Parts?
Genuine Titan OEM gearbox components are identified by manufacturer part number and intended application. Correctly specified gears, washers, sliders and control components help maintain the original equipment configuration.
The Advantage 500 factory documentation identifies crankshaft/gear assembly 0508572, slider assembly 0508208, second-stage gear 704-176 and thrust washer 704-174.
Some components are also referenced in other Titan Advantage, Impact, RentSpray or SprayTech equipment. Shared part numbers do not establish that every assembly or model configuration is interchangeable.
Verify the model, serial number, electrical arrangement and relevant manufacturer supersession information before ordering.
Titan Advantage 500 Gearbox Maintenance and Safety
Before servicing the sprayer, turn it off, disconnect the electrical power supply and complete Titan's prescribed pressure-relief procedure.
Never loosen pressurized fittings or inspect a high-pressure leak with your hands. Fluid injection injuries require immediate emergency medical treatment.
Do not operate the sprayer with gearbox covers removed or damaged. Keep hands, tools and loose clothing away from moving components.
When inspecting gears and sliders, follow the manufacturer's service procedure for component removal, lubrication, reassembly and any specified fastener requirements.
Titan states that electrical work should be performed by a Titan authorized service center. This includes servicing the motor controller, circuit breaker, switches, power cord and pressure-control electronics.
After repairs, verify correct assembly, secure protective covers, grounding and proper sprayer operation before returning the equipment to service.
Titan Advantage 500 Gear Box Assembly Parts FAQ
Answers to common questions about Advantage 500 gears, crankshaft assemblies, sliders, pressure controls and OEM replacement parts.
What parts are included in the Titan Advantage 500 Gear Box Assembly category?
The category lists gearbox and control components such as the crankshaft/gear assembly, slider, second-stage gear, thrust washer, mechanical control assembly, pressure knob, transducer, switches, motor controller and associated hardware.
What is the Titan Advantage 500 crankshaft/gear assembly part number?
Titan 0508572 is the crankshaft/gear assembly identified in the Advantage 500 factory gearbox diagram.
Which slider assembly fits the Titan Advantage 500?
Titan 0508208 is the factory-listed slider assembly for the Advantage 500 gearbox.
What is the Advantage 500 second-stage gear part number?
Titan 704-176 is the second-stage gear specified in the Advantage 500 gearbox diagram.
What does Titan 0551520 Mechanical Control Assembly do?
Titan 0551520 is a mechanical control subassembly associated with the sprayer's pressure-control mechanism. Verify the included components and correct application before purchasing.
Why is my Titan Advantage 500 gearbox making noise?
Unusual mechanical noise may be associated with worn gears, damaged drive components, insufficient lubrication or mechanical interference. Stop operation and have the drive system inspected before ordering parts.
Can I replace individual Advantage 500 gearbox components?
Yes. The category lists individual replacement components including the slider, crankshaft/gear assembly, second-stage gear, thrust washer, control hardware and electrical parts. Select components based on a confirmed diagnosis and the factory diagram.
Where can I buy genuine Titan Advantage 500 Gear Box Assembly Parts?
Shop Titan Advantage 500 Gear Box Assembly Parts at AllTitanParts. Use the manufacturer diagram and OEM part numbers to identify the correct replacement components before checkout.
Shop Titan Advantage 500 Gear Box Parts Today
Find genuine Titan gears, crankshaft assemblies, sliders, thrust washers, pressure controls and electrical components. Match the factory part number and purchase the replacement parts needed for your Advantage 500 repair.
BUY ADVANTAGE 500 GEARBOX PARTS →Need help identifying a replacement part? Call 713-931-0006.