Titan Advantage 500 Stand Assembly Parts
Shop genuine Titan Advantage 500 Stand Assembly Parts for the support structure of your electric airless paint sprayer. Find factory replacement left and right stand legs, protective plugs, retaining hardware, screws, lock nuts and drip cup components.
Replace damaged or missing stand hardware using the Titan Advantage 500 factory exploded parts diagram. Identify the correct OEM part number, compare individual replacement components and restore the proper support arrangement for your stand-mounted sprayer.
Maintain the Stand and Support Structure of Your Advantage 500
The Titan Advantage 500 stand assembly supports the electric airless sprayer during normal setup, operation and storage. Its left and right leg assemblies form the support structure, while the designated screws, clips, plugs and retaining hardware secure or finish individual components.
The stand arrangement also incorporates a drip cup positioned beneath the pump area. This component helps collect incidental fluid drips and supports cleaner maintenance practices, but it does not replace inspection or repair of leaking fluid-section components.
Damaged support legs, missing fasteners or loose stand connections can affect how securely the sprayer rests on a suitable work surface. Replacing a confirmed defective component helps restore the intended factory configuration.
AllTitanParts provides individual Titan OEM stand components, allowing customers to identify and purchase the specific replacement part instead of assuming an entire stand assembly must be replaced.
Shop Titan Advantage 500 Stand Replacement Components
Find essential factory-listed parts for supporting, fastening and maintaining the Advantage 500 stand assembly.
Titan 0551526 Left Leg Assembly
Genuine OEM left stand leg assembly. Titan's factory parts list identifies it as a subassembly incorporating the cord wrap, protective plugs and designated screws.
Part Number: 0551526Titan 0551524 Right Leg Assembly
Factory-listed right stand leg assembly. The manual identifies associated plugs, clip assembly, fasteners and drip cup components within this subassembly.
Part Number: 0551524Titan 700-1041 Drip Cup
OEM drip cup used beneath the pump area to collect incidental fluid drips. Inspect the cup and its attachment when damaged or missing.
Part Number: 700-1041Titan 9885546 Protective Plug
Factory-listed plug used in designated positions on the stand assembly. Match the diagram position and required quantity before ordering.
Part Number: 9885546Titan Advantage 500 Stand Assembly OEM Parts Reference
The following reference combines the factory stand assembly diagram with the nine products currently listed in this category. Quantities describe the factory assembly, not necessarily the contents of each individual product purchase.
| Diagram Item | Titan Part Number | Component Description | Factory Qty. | Category Status |
|---|---|---|---|---|
| 1 | 700-761 | Cord Wrap | 1 | Factory reference; not in current nine-product list |
| 2 | 9885546 | Plug | 4 | Listed |
| 3 | 0551526 | Left Leg Assembly | 1 | Listed |
| 4 | 704-244 | Clip Assembly | 1 | Factory reference; confirm against listed clip 806-216 |
| 5 | 0551434 | Screw | 1 | Listed |
| 6 | 700-1041 | Drip Cup | 1 | Listed |
| 7 | 700-069 | Screw | 2 | Listed |
| 8 | 226-001 | Nylon Lock Nut | 1 | Listed |
| 9 | 0551524 | Right Leg Assembly | 1 | Listed |
| 10 | 9805230 | Drip Cup Screw | 1 | Listed |
| Verify | 806-216 | Clip | Not established | Listed online; confirm diagram application |
How the Advantage 500 Stand Assembly Supports Your Sprayer
Structural Support
The left and right leg assemblies provide the support structure for the stand-mounted Advantage 500 when positioned on a suitable, level surface.
Fastening and Retention
The specified screws, nut, clip assembly and plugs support the factory arrangement of individual stand components.
Drip Management
The drip cup helps collect incidental fluid beneath the pump area, making it easier to observe and manage minor drips during maintenance.
How to Choose the Correct Titan Stand Replacement Part
Confirm Configuration
Verify that your Titan Advantage 500 uses the stand arrangement rather than the upright cart.
Inspect the Damage
Check support legs, mounting points, protective plugs and drip cup components.
Match the Diagram
Identify the affected component using the factory illustration and exact Titan part number.
Verify and Order
Confirm the part number, assembly contents and required quantities before checkout.
Titan Advantage 500 Stand Assembly Inspection Guide
Use the following conditions to identify components requiring inspection. A damaged stand should be repaired before the sprayer is returned to service.
| Observed Condition | Parts to Inspect | Recommended Action |
|---|---|---|
| Sprayer rocks or sits unevenly | 0551526 Left Leg, 0551524 Right Leg and mounting hardware | Check the support surface and inspect both legs for damage or deformation. |
| Left stand leg is bent or cracked | 0551526 Left Leg Assembly | Replace a structurally damaged leg using the correct factory assembly. |
| Right stand leg is damaged | 0551524 Right Leg Assembly | Inspect the leg and included components before selecting replacements. |
| Stand connection is loose | 0551434 Screw, 700-069 Screw and 226-001 Lock Nut | Inspect the designated fasteners and attachment points for damage. |
| Protective plug is missing | 9885546 Plug | Verify the correct diagram position and replace missing plugs. |
| Drip cup is cracked or detached | 700-1041 Drip Cup and 9805230 Screw | Replace damaged components and inspect for an underlying pump leak. |
| Clip assembly is damaged | Factory 704-244; online listing 806-216 | Confirm the correct clip and any manufacturer supersession before ordering. |
Replace a Complete Stand Leg or Individual Hardware?
Complete Leg Assemblies
Select 0551526 or 0551524 when the corresponding stand leg is damaged and a factory replacement assembly is appropriate.
Individual Hardware
Purchase the correct screws, lock nut or protective plugs when the supporting structure remains serviceable and only specific components need replacement.
Drip Cup Components
Replace a damaged drip cup or retaining screw, but investigate any continuing fluid leakage at its source.
Explore Related Titan Advantage 500 Assemblies
Use the relevant factory parts diagram when your repair involves the stand, frame, pump or intake components.
Titan Advantage 500 Stand vs. Upright Cart Compatibility
Titan's Advantage 500 factory manual documents separate stand and upright-cart configurations. The stand uses the left and right support leg assemblies listed above, while the upright cart uses a distinct frame, handle and wheel system.
Do not assume that stand legs, mounting hardware or protective plugs are interchangeable with cart components. Confirm the exact sprayer configuration and factory part number.
Some Titan stand components are also referenced for other Advantage, Impact, RentSpray or SprayTech sprayers. A shared part number may support an individual component's fitment, but it does not establish interchangeability of entire support assemblies.
Use the equipment model and serial information when requesting compatibility assistance.
Titan Advantage 500 Stand Maintenance and Safety
Before inspecting or replacing stand components, turn off the sprayer, disconnect electrical power and follow Titan's pressure-relief procedure.
Place the sprayer on a suitable, level work surface and support its weight securely during stand disassembly. Do not rely on damaged or partially attached support legs.
Inspect the left and right legs for cracks, deformation, loose mounting points and missing fasteners. Replace structurally damaged components rather than attempting unapproved modifications.
Use the specified screws, clips and retaining hardware. Follow Titan's assembly instructions and verify that all connections are secure before operation.
Check the drip cup for damage and accumulated material. A recurring leak beneath the pump should be investigated rather than managed solely by replacing the cup.
After repair, confirm that the sprayer rests securely, protective components are fitted and the stand is stable before returning the equipment to service.
Titan Advantage 500 Stand Assembly Parts FAQ
Answers to common questions about OEM stand legs, drip cups, mounting hardware and stand-mounted Advantage 500 compatibility.
What parts are available for the Titan Advantage 500 Stand Assembly?
The category lists nine products, including the left and right leg assemblies, protective plug, clip, mounting screws, drip cup, nylon lock nut and drip cup screw.
What is the Titan Advantage 500 left stand leg part number?
Titan 0551526 is the factory-listed left leg assembly for the stand-mounted Advantage 500.
Which right leg assembly fits the Advantage 500 stand?
Titan 0551524 is the factory-listed right leg assembly for the Advantage 500 stand configuration.
What is the Advantage 500 drip cup part number?
Titan 700-1041 is the drip cup listed in the stand assembly diagram. Titan 9805230 is the associated drip cup screw.
Are the left and right stand leg assemblies sold separately?
Yes. AllTitanParts lists Titan 0551526 Left Leg Assembly and Titan 0551524 Right Leg Assembly as separate products. Verify each assembly's included components before ordering additional hardware.
Does Titan 806-216 replace stand clip 704-244?
The factory manual identifies 704-244 as the stand clip assembly, while the online category lists 806-216. A confirmed replacement relationship has not been established here. Check with AllTitanParts before purchasing for that diagram position.
Can I use Advantage 500 stand parts on an upright cart model?
Do not assume interchangeability. The stand and upright-cart configurations use different support structures. Match the exact model and manufacturer part number.
Where can I buy genuine Titan Advantage 500 Stand Assembly Parts?
Shop Titan Advantage 500 Stand Assembly Parts at AllTitanParts. Use the exploded diagram to identify the correct OEM support leg, plug, screw, lock nut or drip cup before checkout.
Shop Titan Advantage 500 Stand Assembly Parts Today
Find genuine Titan stand legs, protective plugs, mounting screws, lock nuts and drip cup components. Match the factory part number and purchase the replacement parts needed for your Advantage 500 stand repair.
BUY ADVANTAGE 500 STAND PARTS →Need help identifying a replacement part? Call 713-931-0006.