PowrCoat 1064 · Model 05331064C · 64:1 · 6,400 PSI
Reduce Tip Clogs and Protect Downstream PowrCoat 1064 Components
Shop verified high-pressure filter parts including the cap, 60-mesh element, filter body, hose outlet fitting, bleed valve assembly and return tube.
18-position exploded high-pressure fluid-filter and bleed-path replacement-parts category
Diagram positions retained only when confirmed.
Inspect the complete component group.
No more than six active links.
PowrCoat 1064 High Pressure Filter
Titan’s high-pressure filter removes debris from coating before it reaches the spray hose and gun. The diagram also includes the outlet connection, pressure-relief valve and return-tube path used during priming, flushing and pressure relief.
Verified component index: 0533854, 0533513, 0533514, 0533515, 0533855, 0533856, 0533857, 0533858, 227-033, 0533859, 0533770, 0533517, 0533634, 0533127
Functions Supported by the Assembly
- Captures debris through the standard 60-mesh element.
- Supports the element with spring and internal support.
- Seals the filter cap with two PTFE gaskets.
- Routes filtered coating to the spray hose.
- Provides pressure relief and return flow through the bleed assembly.
Service Applications
- Correcting repeated tip clogging.
- Restoring flow after filter restriction.
- Repairing filter-cap leakage.
- Servicing the spray-hose outlet.
- Repairing priming and pressure-relief flow.
Troubleshooting
Relieve all air and fluid pressure. Inspect genuine components shown on this page and diagnose the actual failure before replacement.
High-Value Replacement Parts
Only active products verified on the supplied category and matched to working internal destinations are linked.
Titan 0533854 Filter Cap
Pressure filter cap.
Titan 0533514 Filter Element, 60 Mesh
Standard high-pressure filter element.
Titan 0533858 Filter Body
Main high-pressure filter housing.
Titan 0533859 Spray Hose Outlet Fitting
Verified high-pressure hose connection.
Titan 0533517 Bleed Valve Assembly
Manual pressure-relief valve assembly.
Titan 0533127 Return Tube Assembly
Return-flow tube for priming and relief.
Buying Guide
Confirm the assembly
Use the exact PowrCoat 1064 diagram.
Match the callout
Check part number and component name.
Inspect mating parts
Find the true failure point.
Order verified fitment
Exclude discontinued or uncertain items.
Maintenance
- Relieve all stored pressure before service.
- Keep air and coating passages clean.
- Inspect seals and mating surfaces together.
- Check fasteners and connections for alignment.
- Record model, part number and service date.
- Replace only after confirming the fault.
Repair Planning
Record the exact model, diagram position, symptom and affected connection before disassembly. Photograph routing and orientation where useful, then inspect every mating pair so the repair addresses the cause rather than only the visible symptom.
Fast Navigation
FAQ Section
Repair the PowrCoat 1064 With Verified Information
Use the exact part number, diagram position and operating symptom to narrow the correct replacement.
- Titan part number
- Assembly callout
- PowrCoat 1064 model
- Component or repair-kit name
- Operating symptom