Titan part 0533514 is a replacement filter element used to remove contaminants from fluid or air lines on compatible PowrCoat and AirCoat spray systems. This element traps debris, dried paint particles, and other impurities to protect spray gun orifices and ensure a smooth, consistent finish.
| Part Number | 0533514 |
|---|---|
| Part Description | Filter Element |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 0533514 Filter Element is an OEM filtration component designed for PowrCoat 630 and AirCoat 423 spray systems. It removes particulate contamination from the fluid or air supply before it reaches the spray gun, preventing nozzle clogging, tip wear, and finish defects.
Over time, filter elements become clogged with debris, hardened paint, or other contaminants. A restricted filter can cause reduced flow, pressure drop, erratic spray patterns, or poor atomization. Replacing the filter element restores proper flow and protects your spray gun from damage.
| Contaminant removal | Traps debris, dried paint, and particles down to the rated micron size |
|---|---|
| Protects spray gun | Prevents nozzle clogging and tip orifice damage |
| Maintains finish quality | Ensures consistent fluid flow for smooth atomization |
| Reduced flow / pressure drop | Spray gun starves or pulsates even with full pump pressure |
|---|---|
| Clogged visible debris | Filter element appears dirty, coated, or blocked |
| Erratic spray pattern | Pattern tails, spits, or has streaks |
| Scheduled maintenance | Replace every 50-100 hours of use or after heavy jobs |
Titan part 0533514 is a direct replacement filter element for the following spray systems. Verify the filter housing type (in‑line, cup, or gun filter) before ordering.
| Brand / Model | Components |
|---|---|
| PowrCoat 630 | Filter Element |
| AirCoat 423 | Filter Element |
When replacing a filter element, inspect or replace these associated components for optimal system performance.
Check for cracks, warping, or damaged threads. Replace housing if it does not seal properly.
Replace any seals that have hardened or cracked to prevent air leaks.
If a coarse strainer is present in the pump inlet, clean or replace it at the same time.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
