Titan Epic 440E | Gear Box Diagram and Replacement Components
Shop Titan Epic 440E Gear Box Parts
Find Epic 440E Gear Box Parts for your Titan electric airless paint sprayer at AllTitanParts. Browse replacement thrust washers, motor mounting screws, cover plates, pressure control components, electrical switches, motor starters, and fuses identified in the Titan Epic 440E Gear Box diagram. Match the diagram reference and Titan part number to locate the correct repair component before ordering.
Gear Box Parts Overview
Buy Titan Epic 440E Gear Box Replacement Parts Online
The Titan Epic 440E Gear Box Parts category provides replacement components identified in the gear box assembly diagram for the Titan Epic 440E electric airless sprayer. The category includes mechanical support components, mounting hardware, protective plates, and electrical control parts associated with this assembly.
The sprayer's drive system transfers power from the electric motor to the pumping mechanism. Proper component alignment, secure mounting, and correctly installed hardware are important for reliable operation. Thrust washers help manage axial contact at specified locations, while mounting screws, lock washers, and plates help secure designated components.
The factory gear box diagram also identifies electrical and control-related components, including the pressure control knob, motor starter, toggle switch, and fuse. These components have different functions from the mechanical washers and mounting hardware, but they are grouped together in the model's parts illustration.
Replacing a worn or damaged component begins with accurate identification. A washer with a similar appearance may have a different thickness, diameter, or installation position. Likewise, a replacement fuse or electrical switch must match the manufacturer's specifications rather than merely fit the available space.
Use the Titan Epic 440E Gear Box diagram, component reference number, and exact manufacturer part number to select replacement parts for maintenance and repair.
Factory Parts Reference
Titan Epic 440E Gear Box Parts Diagram and Parts List
The following components are listed in the Epic 440E Gear Box Parts category. Diagram references correspond to the item numbers displayed in the catalog.
| Diagram Ref. | Titan Part Number | Replacement Component | Primary Purpose |
|---|---|---|---|
| 28 | 700-771 | Pressure Control Knob | Operator pressure adjustment control. |
| 32 | 700-688 | Thrust Washer | Axial support at its specified assembly location. |
| 34 | 700-514 | Thrust Washer | Thrust bearing surface at the designated position. |
| 39 | 700-680 | Thrust Washer | Supports the specified mechanical assembly interface. |
| 41 | 700-681 | Motor Mount Screw | Secures designated motor or mounting hardware. |
| 43 | 700-791 | Cover Plate | Covers its designated assembly opening or area. |
| 51 | 700-657A | Motor Starter | Motor starting system component. |
| 52 | 700-646 | Toggle Switch | Electrical switching control. |
| 53 | 9822113 | Lock Washer | Supports the specified fastener installation. |
| 56 | 700-775 | Plate | Assembly support or mounting plate. |
| 59 | 700-720 | 10 Amp Fuse | Specified electrical circuit protection. |
| Not specified | 0275710 | 15 Amp Fuse | Fuse for its manufacturer-specified circuit configuration. |
Important: Both 10 amp and 15 amp fuses appear in the category. They are not interchangeable solely because they are listed together. Verify the required fuse rating using the applicable equipment documentation.
Replacement Part Details
Shop Titan Epic 440E Gear Box Components by Part Number
Titan 700-771 Pressure Control Knob
Diagram Reference: 28
The pressure control knob provides the operator interface for adjusting the sprayer's pressure setting. Inspect the knob for cracking, damage, looseness, or inability to engage its designated control mechanism. A damaged knob should be distinguished from an internal pressure control fault before replacement.
Titan 700-688 Thrust Washer
Diagram Reference: 32
This thrust washer is identified at reference 32 in the gear box parts diagram. It is intended for its designated mechanical location. Inspect for wear, scoring, deformation, or other damage during approved disassembly and verify the exact part number before ordering.
Titan 700-514 Thrust Washer
Diagram Reference: 34
The Titan 700-514 is a separate thrust washer listed for reference 34. Its product description identifies a steel washer with a nominal 0.627-inch inside diameter and 1.115-inch outside diameter. Confirm the applicable drawing and part specification before installation.
Titan 700-680 Thrust Washer
Diagram Reference: 39
The Titan 700-680 thrust washer is identified at reference 39. The listing describes dimensions of approximately 1.39 inches inside diameter and 2.039 inches outside diameter. Do not substitute another thrust washer simply because its function appears similar.
Titan 700-681 Motor Mount Screw
Diagram Reference: 41
The Titan 700-681 motor mount screw is used at the designated assembly location. The product listing also describes it as a socket head cap screw with a 1/4-20 thread. Verify screw length, installation location, and tightening requirements using the manufacturer's service instructions.
Titan 700-791 Cover Plate
Diagram Reference: 43
The cover plate is a designated component of the Epic 440E Gear Box diagram. Inspect it for physical damage, deformation, and improper fit. Use the original part number to obtain the specified replacement rather than modifying an unrelated plate.
Titan 700-657A Motor Starter
Diagram Reference: 51
The Titan 700-657A Motor Starter is an electrical component identified in the gear box parts category. Its product listing identifies 700-657 as the replaced part number.
Confirm the installed motor configuration and applicable electrical specifications. Electrical diagnosis and replacement should be performed by qualified personnel.
Titan 700-646 Toggle Switch
Diagram Reference: 52
The Titan 700-646 Toggle Switch provides a switching function in its specified electrical circuit. A damaged or malfunctioning switch may require replacement after proper electrical diagnosis. Match the exact part number and follow the wiring diagram when servicing the switch.
Titan 9822113 Lock Washer
Diagram Reference: 53
The Titan 9822113 Lock Washer is listed as the replacement for part numbers 700-785 and 704-126.
Use the correct washer at its specified installation location and follow the applicable fastener assembly procedure.
Titan 700-775 Plate
Diagram Reference: 56
The Titan 700-775 Plate is a structural component identified in the gear box parts diagram. Inspect the plate and its associated mounting hardware for damage or deformation. Confirm the part number and diagram position before replacing it.
Titan 700-720 Fuse, 10 Amp
Diagram Reference: 59
The Titan 700-720 is listed as a 10 amp fuse. Replace a failed fuse only with the exact type and rating specified for the relevant circuit. Repeated fuse failure requires diagnosis of the underlying electrical problem.
Titan 0275710 Fuse, 15 Amp
Diagram Reference: Not specified
The Titan 0275710 is listed as a 15 amp fuse and is identified as replacing 700-895.
Its presence in this category does not establish that it can replace the 10 amp Titan 700-720. Always verify the circuit requirements before purchasing or installing a fuse.
Replacement Number Reference
Titan Epic 440E Gear Box Part Number Replacements
Several product listings identify earlier Titan part numbers. These references can help when searching an older parts manual or matching a removed component.
| Previous Part Number | Listed Replacement | Component |
|---|---|---|
| 700-657 | 700-657A | Motor Starter |
| 700-785 | 9822113 | Lock Washer |
| 704-126 | 9822113 | Lock Washer |
| 700-895 | 0275710 | 15 Amp Fuse |
These replacement relationships are stated in the individual product listings. Confirm suitability for your equipment configuration before ordering.
Gear Box Troubleshooting
Common Titan Epic 440E Gear Box and Control Problems
Gear box symptoms may originate from mechanical components, the motor, electrical controls, or the connected pumping system. Follow the manufacturer's diagnostic procedure before replacing parts.
| Observed Symptom | Parts or Systems to Inspect | Recommended Check |
|---|---|---|
| Unusual mechanical noise | Thrust washers, drive components, mounting hardware | Stop operation and inspect for wear, damage, or looseness. |
| Excessive vibration | Motor mounts, screws, plates, drive system | Check mechanical mounting and related components using the service manual. |
| Pressure knob damaged | 700-771 Pressure Control Knob | Inspect for physical damage and verify that the control mechanism is functional. |
| Motor will not start | Power supply, toggle switch, starter, fuse, motor | Follow qualified electrical troubleshooting procedures. |
| Fuse repeatedly fails | Electrical circuit, motor, wiring, connected load | Stop replacing fuses until the cause is diagnosed. Never increase the fuse rating to bypass a fault. |
| Motor runs but pumping is abnormal | Drive system and fluid pump | Inspect the relevant mechanical and pump assemblies. |
Parts Identification Guide
How to Choose the Correct Epic 440E Gear Box Parts
Identify Your Sprayer
Confirm that your equipment is the Titan Epic 440E and check its serial information.
Locate the Diagram Item
Find the required component's reference number in the gear box parts illustration.
Match the Titan Part Number
Compare the part number, description, dimensions, and documented replacement information.
Confirm Service Requirements
Check the required quantity, installation procedure, and electrical specifications where applicable.
Preventive Maintenance
Titan Epic 440E Gear Box Maintenance Tips
Inspect Thrust Washers
During authorized service, check washers for scoring, deformation, excessive wear, and incorrect placement.
Check Mounting Hardware
Inspect motor mount screws, lock washers, and mounting plates according to the manufacturer's service instructions.
Examine Covers and Plates
Replace damaged cover plates and verify that all required protective components are installed before operation.
Monitor Electrical Controls
Investigate damaged switches, intermittent operation, or repeated fuse failure through qualified electrical diagnosis.
Related Titan Epic Parts
Shop Related Titan Epic 440E Replacement Parts
Epic 440E Gear Box Parts
Shop washers, mounting hardware, pressure controls, electrical switches, and fuses.
Titan Epic 440E Motor Parts
Browse the separate motor parts diagram and the Titan 700-040 Motor Brush.
Titan Epic 440E Parts Directory
Explore additional Epic 440E repair and replacement assemblies.
Titan Epic 440E Gear Box Repair Safety
Before servicing gear box, motor, or electrical components, switch off the sprayer, disconnect electrical power, and follow the complete pressure-relief procedure in the applicable Titan manual. Allow moving components to stop and hot parts to cool. Electrical diagnosis and repairs should be performed by qualified personnel. Never bypass a protective switch, substitute a higher-rated fuse, or operate the equipment with required covers removed. Use the specified parts and follow the manufacturer's installation and testing instructions.
Titan Epic 440E Gear Box Replacement Components
Order Epic 440E Gear Box Parts Online
Find Titan Epic 440E thrust washers, pressure control components, motor mounting hardware, switches, and fuses at AllTitanParts. Match your diagram reference and original part number before purchasing.
Shop Epic 440E Gear Box PartsFrequently Asked Questions
Titan Epic 440E Gear Box Parts FAQ
What parts are listed in the Titan Epic 440E Gear Box category?
The category lists pressure control components, three thrust washers, a motor mount screw, cover plate, motor starter, toggle switch, lock washer, plate, and two fuse products.
Where can I buy Titan Epic 440E Gear Box Parts?
You can browse and order listed products from the Epic 440E Gear Box Parts category at AllTitanParts.
What is the part number for the Titan Epic 440E pressure control knob?
The pressure control knob is Titan 700-771, identified as diagram reference 28.
Which thrust washers are listed for the Epic 440E Gear Box?
The listed thrust washers are Titan 700-688 at reference 32, Titan 700-514 at reference 34, and Titan 700-680 at reference 39. They should not be treated as interchangeable.
What is the Titan Epic 440E motor mount screw part number?
Titan 700-681 is the listed Motor Mount Screw at diagram reference 41.
What replaces Titan 700-657 Motor Starter?
The product listing identifies Titan 700-657A Motor Starter as replacing Titan 700-657. Confirm the applicable motor configuration before ordering.
What replaces Titan 700-785 and 704-126 Lock Washers?
The catalog lists Titan 9822113 Lock Washer as the replacement for both part numbers.
What is the Titan Epic 440E toggle switch part number?
Titan 700-646 Toggle Switch is identified at diagram reference 52.
Can I replace a Titan 700-720 10 amp fuse with a 15 amp fuse?
No substitution should be made without manufacturer authorization. The 10 amp and 15 amp fuse listings have different ratings, and using an incorrect fuse can defeat circuit protection.
What fuse replaces Titan 700-895?
The catalog identifies Titan 0275710, a 15 amp fuse, as replacing Titan 700-895.
Why is my Titan Epic 440E making unusual mechanical noise?
Possible causes include worn mechanical components, loose mounting hardware, drive damage, or pump-related problems. Stop operation and follow the manufacturer's troubleshooting procedure.
How do I identify the correct gear box washer?
Use the diagram reference and original Titan part number. Check the manufacturer's specifications rather than selecting a washer solely by its appearance.
Are Titan Epic 440E Gear Box Parts interchangeable with other Epic models?
Do not assume interchangeability. Verify the exact manufacturer part number and documented model compatibility before purchasing.
How can I get help identifying Titan Epic 440E Gear Box Parts?
Contact AllTitanParts at 713-931-0006 with your sprayer model, diagram reference, original part number, and component description.
Titan Gear Box Parts Assistance
Need Help Finding Epic 440E Gear Box Parts?
Have your Titan Epic 440E model information, original part number, and factory diagram reference ready when requesting assistance.
713-931-0006