Please wait while we process your order...

Link copied!
Genuine OEM Parts For
Impact 540 Main Assembly Impact 540 Fluid Section Impact 540 Suction Set Order by Official Parts Diagram
In Short

The Titan Impact 540 is an electric piston-pump airless sprayer, and the site documents it with a separate parts diagram for each assembly: main assembly, fluid section, suction set, drive, skid, low rider, cart and accessories. AllTitanParts.com sells genuine OEM Titan Impact 540 parts from those diagrams. Most available items are processed for shipment within about 1-2 business days.

What Is the Impact 540?

The Impact 540 is part of Titan's original Impact line, between the Impact 440 and the Impact 640. Titan lists it at 3300 psi maximum pressure and 0.60 gpm maximum delivery, with a 0.024" maximum tip size and a 1.2 hp brushless motor. For long hose runs, Titan's pages give a 300 foot maximum hose length. Check your manual for the settings that apply to your coating and tip.

Do not mix it up with the Impact X 540I, which is a separate newer design with its own diagram pages and different pump parts. This page covers the original Impact 540 only. For a side-by-side look at the two mid-range models, see Impact 540 vs Impact 640, and for the machine's specs and tip limits see Titan Impact 540 Specs.

The Assemblies at a Glance

Each diagram page shows an exploded view with numbered callouts, so a symptom can be traced to an assembly and then to a part number. These are the core pages for the 540.

 

Main Assembly

Power switch, inlet screen, ground screw, motor screws, hose tie clamp.

 

Fluid Section

Manifold filter, PrimeSpray valve, piston guide, O-rings, retainer.

 

Suction Set

Suction set, return tube, inlet screen filter, clips and O-rings.

 

Skid Assembly

Left and right legs, foot rubbers, drip cup, cord holder.

 

Drive Assembly

Main housing, crankshaft/gear, 2nd stage gear, slider, motor controller.

 

Low Rider Assembly

Handle weldment, hub cap, drip cup, wheel spacer, hardware.

Main Assembly Parts

The Impact 540 main assembly diagram lists 43 parts, including the power switch 9850936, the inlet screen 710-046, the ground screw 9800340, the nut with seal 700-176, the hose tie clamp 730-334 and the motor mount and motor baffle screws. It is the page to start with for switch, screw and clamp replacements. The drive side has its own drive assembly page, where the diagram lists the main housing 805-204A, crankshaft/gear assembly 704-173A, 2nd stage gear 704-176 and the 805-837 motor controller.

Titan 704-586B Repacking Kit −8%
Titan
Titan 704-586B Repacking Kit
Part #: 704-586B
$84.91 $92.60 Save $7.69
Buy Now
Titan 730-067 60 Mesh Manifold Filter #1 Seller
Titan
Titan 730-067 60 Mesh Manifold Filter
Part #: 730-067
(1)
$18.00
Buy Now
Titan 700-805 Inlet Screen Filter −8%
Titan
Titan 700-805 Inlet Screen Filter
Part #: 700-805
$24.56 $26.74 Save $2.18
Buy Now
Titan 661-020 Tip Seat and Seal Kit (5 Pack) −8%
Titan
Titan 661-020 Tip Seat and Seal Kit (5 Pack)
Part #: 661-020
$37.05 $40.10 Save $3.05
Buy Now

Fluid Section Parts

The fluid section is the pump end that pressurizes the coating, so it is the busiest diagram on the machine at 48 listed parts. The Impact 540 fluid section page covers the upper piston guide 700-587, seat O-ring 762-058, PrimeSpray valve assembly 700-258, valve handle 700-697, the manifold filter parts and the outlet fitting. Packings come as the 704-586B repacking kit, which the diagrams list for the 440 and 540.

Buying tip Pressure that will not build or hold has several possible causes in Titan's manuals: an air leak, a clogged filter or inlet screen, a worn tip, or a worn fluid section. Work through the filters and tip first, then use the fluid section diagram if the manual points to worn packings or valves. Check your manual for the exact steps.

Suction Set Parts

The suction set diagram has nine parts: the suction set assembly 0558672A, return tube 0558659A, inlet screen filter 700-805, retaining clip 9822526, O-ring 9871105, clip 0279459 and a tie wrap. A cracked tube or a loose connection on this side can let air into the pump, which is one of the causes Titan's manuals list for a sprayer that will not prime, so it is a quick page to check against.

Choosing the Right Frame Diagram

The site lists the Impact 540 in three frame versions: skid 805-001, high rider 805-006 and low rider 805-003. The pump, drive and fluid section pages are the same set for all of them, and what changes is the frame. Pick the diagram that matches the frame you own.

  • Skid: use the skid assembly page for the legs, foot rubbers, drip cup and cord holder.
  • High rider: use the cart assembly 805-282A page for the cart 805-281, handle weldment 805-278, wheel 0278373 and hub cap.
  • Low rider: use the low rider assembly page for the handle weldment 704-309, drip cup 700-1043 and hardware.

Wear Parts to Know

Titan's manuals name the same few wear items for most pump complaints: tip, filters, packings and valve seats and balls. On the 540, the diagrams put them in these places.

  • Filters: the 60 mesh manifold filter 730-067 (fluid section), the inlet screen filter 700-805 (suction set) and the gun filters 0089957 (coarse) and 0089959 (100 mesh) on the accessories page.
  • Packings: the 704-586B repacking kit.
  • Tip seat and seal: the 661-020 tip seat and seal kit.
  • Piston lube: 314-480 (8 oz) and 700-926.

Titan does not publish a replacement interval for these parts that we can quote, so go by symptoms and your manual. A worn tip, a dirty filter and worn packings can look alike at the gun, which is why the manual's troubleshooting order is worth following.

Accessories Page

The Impact 540 accessories page lists 24 items that go with the machine rather than sit inside it: the 316-505 50 foot spray hose, the 316-506 whip hose, the 0538022 RX-Pro airless spray gun, the 0538020 RX-Pro gun with a 517 TR1 tip, the 651-070 tip extension with guard, the 0289228 tip guard, the 704-552A piston assembly, Liquid Shield 314-482 and the piston lube above. What came in the box with your machine depends on how it was sold, so use this page to match items rather than assume.

Common Ordering Mistakes to Avoid

The most frequent mistake is ordering from a similar-sounding description instead of confirming the part against the diagram for your exact frame: skid, high rider or low rider. Another is reading the Impact 440, 640 or Impact X page by accident. Some part numbers appear on more than one model's diagram, but compare the callout and number on the 540 page rather than assuming a part from another model fits. The 640 pages are close to the 540 in layout, so double-check the model in the page heading before you add anything to the cart.

How to Order Impact 540 Parts

AllTitanParts.com is an Authorized Titan Dealer supplying genuine OEM replacement parts for Titan, SpeeFlo, SprayTech and Wagner equipment, based in Houston, Texas. Orders are processed on business days with a 12 pm Eastern cut-off. Most available items are processed for shipment within about 1-2 business days, and some items are ordered from the manufacturer after you order, so availability shown does not always mean an item is on a shelf. Delivery dates are estimates, so see Shipping Info for the details. If you are not sure which assembly your part belongs to, call (713) 931-0006 with your model and serial number and the team will help confirm the part before you order. The owner's manual for your sprayer is on the manuals page.

Not Sure Which Impact 540 Assembly You Need?

Give us your model and symptom and we'll help confirm the exact OEM part before you order.

(713) 931-0006 Order by Parts Diagram
Frequently Asked Questions
What are the main assemblies on a Titan Impact 540?
The site has parts diagrams for the Impact 540 main assembly, fluid section, suction set, drive assembly, skid assembly, low rider assembly, cart assembly and accessories. Each page lists numbered callouts and part numbers.
Which Impact 540 configuration do I have?
Titan sells the 540 as a skid, a high rider and a low rider. The site lists them as 805-001 (skid), 805-006 (high rider) and 805-003 (low rider). Check which frame your machine has, then use the matching skid, cart or low rider diagram.
Where are the filters and the PrimeSpray valve on the Impact 540?
The 60 mesh manifold filter 730-067, the filter screen adapter 702-251, the support spring 757-105 and the PrimeSpray valve assembly 700-258 are listed on the Impact 540 fluid section diagram. The inlet screen filter 700-805 is on the suction set diagram.
How do I confirm the right part before ordering?
Open the diagram for your assembly, match the numbered callout to the part, and compare the part number. If you are unsure, call (713) 931-0006 with your model and serial number.
How fast do Impact 540 parts ship?
Orders are processed on business days with a 12 pm Eastern cut-off. Most available items are processed for shipment within about 1-2 business days, and standard delivery is generally expected about 4-5 business days after shipment. These are estimates, some items are ordered from the manufacturer after you order, and smaller orders may take 5-7 business days to ship. See the Shipping Info page for details.
On this page

Added to cart

Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart