Each PowrBeast has a maximum tip size that gets smaller as you add guns, because the pump's delivery is shared. A 9700 is listed for a 0.055 in. tip on one gun, a 7700 gas for 0.047 in. Fit a tip within your model's limit, replace it when the pattern degrades, and renew the seat and seal with it.
What the unit ships with
Titan's listing text, as reproduced by retailers, says each PowrBeast comes with an RX-Pro gun with a 517 TR1 reversible tip and a 1/4 in. x 50 ft airless hose. On the site, that gun is listed as 0538020, RX-Pro Airless Spray Gun, 517 TR1 Tip. A reversible tip lets you rotate it to clear a clog, following the tip's own instructions.
Tip size and the number of guns
The sprayer's delivery is shared among the guns you run. Titan's tip tables therefore list a largest tip for each gun count, and the number falls as guns are added. Choose from this table, not by feel:
Largest tip listed, by model and number of guns
| Guns | 4700 electric | 4700 gas | 7700 gas | 7700 230V | 9700 gas |
|---|---|---|---|---|---|
| 1 | 0.033" | 0.041" | 0.047" | 0.043" | 0.055" |
| 2 | 0.023" | 0.029" | 0.033" | 0.031" | 0.039" |
| 3 | 0.019" | 0.021" | 0.027" | 0.023" | 0.031" |
| 4 | - | 0.019" | 0.023" | 0.021" | 0.027" |
| 5 | - | - | - | - | 0.023" |
The 4700 figures come from listings that reproduce Titan's spec block, so word them as listed. Titan's text and retailer text disagree on how many guns a 4700 supports, so check your manual before planning a multi-gun setup on one.
These are ceilings, not recommendations. We do not recommend a tip size for a particular coating; the coating maker's data sheet gives that. Keep the tip at or below the figure for your gun count, and use a tip rated for the system pressure.
Tip wear
A worn tip has a wider orifice. Pressure falls, the pattern turns coarse or streaky, and the sprayer uses more paint. Replace the tip when the pattern degrades, not on a calendar: Titan does not publish a tip life for the PowrBeast. If a new tip fixes the pattern, the pump was fine. If it does not, look at filters next.
Tip seat, seal and tip guard
The tip seat and seal are the small wear items that go with the tip. The site lists 661-020, a tip seat and seal kit in a five-pack, on the PowrBeast accessories pages. Fit a fresh set with a new tip.
The tip guard is 0289228, listed as a G-THREAD tip guard. Keep it on the gun at all times: a jet of paint can inject fluid through the skin, and the guard is part of what keeps your hand away from the tip. A cracked guard should be replaced, not taped. The accessories pages also list a 6 in. gun tip extension with guard, 651-070.
Gun filters
A filter in the gun handle catches particles before they reach the tip. A partly blocked filter causes pressure loss, pulsing and spitting, and clearing it after every job is cheaper than diagnosing the pump. The diagrams list three options:
- 0089959, filter, 100 mesh, yellow.
- 0089957, gun filter, coarse, green, 2-pack.
- 0089958B, filter replacement mesh, packaged.
Pick the mesh to suit the coating you are spraying. The RX-APEX listed above is a non-filtered gun, so it has no gun filter to maintain. The pump also has manifold filters on the high pressure filter pages, which are separate from the gun filter.
Guns on the diagrams
The accessories pages list several guns besides the RX-Pro: 0538070 RX-APEX non-filtered airless gun, 0538005 RX-80 airless spray gun, and 550-250 S-3 swivel spray gun. The accessories pages also list RX-Pro grip kits. We do not publish fan angles for PowrBeast tips, as Titan does not publish them for the series. For the full accessories lists, open the page for your model:
Spray end parts for a PowrBeast:
−15%
−23%
The Short Version
Match the tip to your model's table at your gun count, replace it when the pattern degrades, and renew the seat and seal. Keep the tip guard on and a spare gun filter handy. If you are unsure which accessories page your model uses, call (713) 931-0006.
Not sure which tip or filter fits your gun?
Call (713) 931-0006 with your PowrBeast model and our parts team will point you to the right part.
(713) 931-0006Order by Parts Diagram