The Impact X line has four members on this site: the X 410 (0.47 gpm), the X 440 and X 540I (0.54 gpm each) and the battery-powered X 120. The three corded models are 3300 psi sprayers with a brushless motor and Titan's Logix pressure control. The X 120 is a low-pressure battery unit for fine finishes in open areas.
Titan's Impact X is the newer design in the Impact family, with its own pump parts and its own diagram pages. Three of the four models are corded 120 V sprayers that differ mainly in delivery, tip size and what comes in the box. The fourth, the X 120, is a different kind of tool. This page lays the four side by side using only numbers that Titan and dealers agree on.
The Numbers Side by Side
Impact X models: verified specs
| Model | Max delivery | Max tip (one gun) | Max pressure | Motor / power |
|---|---|---|---|---|
| Impact X 410 | 0.47 gpm (1.78 L/min) | 0.021" | 3300 psi | DuraLife HE brushless |
| Impact X 440 | 0.54 gpm (2.04 L/min) | 0.023" | 3300 psi | DuraLife HE brushless |
| Impact X 540I | 0.54 gpm (2.04 L/min) | 0.023" | 3300 psi | DuraLife HE brushless |
| Impact X 120 | 0.31 gpm (1.2 L/min) | 0.017" | 1600 psi (11.1 MPa) | 18 V battery |
Motor horsepower is left out on purpose: dealer pages disagree on it, so check your sprayer's label. Dealer pages also show 0.60 gpm and a 0.024" tip for the 540I; those match the older Impact 540, not the X 540I.
The 440 and 540I match on delivery and tip. Titan gives the 440 a weekly volume of 50-100 gallons, and gives no weekly figure that agrees across sources for the 540I, so do not size a 540I on the strength of that number alone.
What Titan Says the Impact X Adds
- Logix Adaptive Pressure Control: Titan describes it as tip-sensing, adjusting pump speed and power to the tip size. It is listed on the X 410, X 440 and X 540I.
- MaxFX No Tools Fluid Section: Titan says it changes in minutes with just your hands.
- Vertical filter housing: Titan says it cleans up to three times faster with as little as one third of the water.
- Quad+ Packings and PermaLife Cylinder on the X 410: self-adjusting packings, and a cylinder Titan says never needs replacing.
- 360-degree adjustable handle across the Impact X line, and a lever-action prime/spray valve listed for the 540I.
The 540I also carries the IntelliSync name, which is Titan's Bluetooth link to the MyTitan app. If you are trying to decide between the Impact X line and the IntelliSync line, that is a separate question with its own page on this blog.
What Is in the Box
Included gun and tip, per Titan's product pages
| Model | Gun | Tip |
|---|---|---|
| Impact X 410 | RX-80 | 517 HEA or TR1 |
| Impact X 440 | RX-80 | 517 HEA or TR1 |
| Impact X 540I | RX-Pro | 517 HEA |
| Impact X 120 | RX-80 | 517 HEA plus a 312 fine finish tip |
The X 410 box also holds a 4 oz bottle of Piston Lube (314-481) and a 60 mesh filter, 2424933. Check the listing for the exact configuration you are buying.
Configurations and Their Part Numbers
Each corded Impact X is sold in more than one frame style, and the part number identifies which one you have. Titan's pages and the site list these:
Impact X configuration part numbers
| Model | Skid | High rider | Low rider |
|---|---|---|---|
| Impact X 410 | 2430897 | 2430869 | - |
| Impact X 440 | 2429069 | 2430510 | - |
| Impact X 540I | 2431656 | 2431657 | 2431658 |
The frame style decides which cart or leg parts you need. The 540I has separate High Cart and Low Cart diagram pages, so find the one matching your sprayer before you order a wheel, handle or drip cup.
The Battery X 120 Is a Different Tool
Dealers and Sherwin-Williams describe the Impact X 120 as an 18 V sprayer that runs on Bosch AMPShare batteries, carries a built-in hopper of 1.25 gallons and covers up to 1400 square feet per charge. It can be used as a backpack, carried at the side or set down. It is a low-pressure airless unit for latex and oil-based paints and stains, fine finishes and open areas, and it ships with an RX-80 gun, two 4Ah batteries, a charger and a grounding cable. Its part number is 2441253A.
Its parts are separate from the corded models. The site has three X 120 pages: Main Assembly, Spray Gun Assembly and Accessories. The motor kit 2463224, control board 2449866 and the AMPShare charger 2463866 are on the main page.
What Each Model Suits
Titan lists the X 410 and X 440 for residential work, property maintenance and small commercial jobs with standard architectural primers, paints and coatings. The X 440 also covers stains, lacquers, enamels, latex and other low and medium viscosity coatings. The X 540I is listed for residential, municipal, property maintenance and small commercial work. Titan does not give per-job guidance beyond that, so for a heavy-bodied coating or a high gallon week, confirm with the manual or call us.
Where the Parts Are
The three corded models share a lot. The fluid-section pages for the 410, 440 and 540I carry the same inlet valve ball 762-145, outlet valve ball 50164, inlet valve cage 704-703 and upper piston guide 700-587, and the 440 and 540I share repacking kit 704-586B. The filter pages share the 60 mesh filter 2424933. The diagrams list the same part number on several models; that does not make every part interchangeable, so still confirm against your own page.
Parts shared across the Impact X diagram pages.
Main assembly parts
Main assembly parts
Main assembly parts
Battery sprayer parts
Choosing between them
The 410 is the smallest corded Impact X; the 440 and 540I share delivery and tip size. The X 120 is a battery unit for fine finishes. If you already own one, use your configuration number to open the right diagram pages; if you are not sure, call (713) 931-0006 with the model and serial number.
Not sure which Impact X you have?
Have the model and serial number ready and our parts team will confirm the diagram.
(713) 931-0006Order by Parts Diagram