Titan 353-706 25' Hose
Keep your painting projects moving with the Titan 353-706 25' Hose, a 25-foot replacement spray hose for compatible Titan ControlMax High Efficiency Airless (HEA) spraying equipment. Designed to carry pressurized coating material from the sprayer to the spray gun, this hose provides the working reach needed for residential painting, maintenance, and renovation projects. It is a practical replacement for a worn or damaged hose and helps maintain a dependable fluid connection during spraying.
Compatibility: Intended for applicable Titan ControlMax HEA configurations. Verify your sprayer model, hose fittings, and pressure requirements before ordering.
Replace a leaking, cracked, kinked, or excessively worn spray hose with the correctly specified replacement. Never operate airless spray equipment with a damaged or improperly rated hose.
Keep Your Sprayer Ready with the Titan 353-706 25-Foot Hose
Maintain dependable coating delivery and convenient working reach with the Titan 353-706 25' Hose. This 25-foot High Efficiency Airless (HEA) spray hose is identified in Titan's ControlMax parts documentation for the ControlMax 1500 sprayer. Designed to connect compatible airless spraying equipment to its spray gun, it offers a practical replacement for a damaged or worn hose while supporting controlled movement around your painting area.
How the Titan 353-706 Hose Works
The Titan 353-706 carries pressurized paint or other approved coating material between the sprayer pump and spray gun. During operation, material passes through the hose to the gun, where the spray tip forms the desired application pattern.
Its 25-foot length provides useful working reach for walls, fences, siding, and other surfaces while keeping the hose manageable for smaller painting projects. It is particularly relevant when restoring the original hose configuration of a ControlMax 1500.
When Should You Replace Your ControlMax Spray Hose?
Inspect the hose before every spraying session. Replacement may be necessary if you discover:
- Cracks, cuts, or excessive abrasion on the hose jacket.
- Coating material leaking from the hose or attached fittings.
- Severe kinks, crushed sections, or permanent deformation.
- Damaged or stripped connection threads.
- A hose with an inadequate or unreadable pressure rating.
Never repair a damaged high-pressure spray hose with tape, clamps, or improvised fittings. Replace the hose with an approved assembly before returning the equipment to service.
Choosing the Correct ControlMax Hose Length
Titan's ControlMax parts manual identifies different original hose lengths for different sprayer models.
These are manufacturer-listed original configurations. Alternate hose lengths require confirmation of pressure rating, connections, and maximum permitted total hose length.
Titan 353-706 is documented as a ControlMax 1500 hose and is also marketed for compatible HEA systems. It should not be treated as a universal hose for all Titan airless sprayers. Check the hose pressure rating, fitting dimensions, sprayer operating pressure, and manufacturer's permitted hose length before purchasing or installing.
Shop Related Titan ControlMax Parts
Find replacement hoses, spray guns, spray tips, and related ControlMax components to maintain your airless spraying equipment.
Installation and Safety Guidance
Before removing an existing hose, switch off the sprayer, disconnect electrical power, engage the spray gun trigger lock, and complete the manufacturer's pressure-relief procedure.
Inspect the replacement hose and its fittings before installation. Connect the hose according to the ControlMax operating manual, ensuring that the fittings match and are properly secured. Keep the hose away from sharp edges, excessive heat, vehicle traffic, and areas where it could be crushed.
After installation, check the system for leaks using the manufacturer's approved procedure. Never touch a suspected high-pressure leak. Fluid injected through the skin can cause serious injury and requires immediate emergency medical attention.
Frequently Asked Questions
Common questions about Titan 353-706 hose specifications, compatibility, and replacement.
What is Titan 353-706?
Titan 353-706 is a 25-foot High Efficiency Airless spray hose identified for compatible Titan ControlMax spraying equipment.
Which Titan sprayer originally uses the 353-706 hose?
Titan's ControlMax parts manual identifies 353-706 as the original 25-foot hose for the ControlMax 1500.
How long is the Titan 353-706 spray hose?
The hose measures 25 feet, equivalent to approximately 7.62 meters.
Does Titan 353-706 replace 353-707?
Some retailer listings describe 353-706 as a replacement for 353-707. However, Titan's parts manual identifies 353-706 as a 25-foot hose and 353-707 as a 30-foot hose. Confirm any substitution against the exact sprayer and hose requirements.
Can I use Titan 353-706 with Wagner Control Pro sprayers?
The 353-706 is also marketed for compatible Wagner Control Pro HEA spraying systems. Check the exact machine model, hose connections, and pressure requirements before installation.
Can this hose be used on conventional high-pressure Titan sprayers?
Do not assume compatibility. The 353-706 is identified as an HEA hose. Its marked pressure rating must meet or exceed the requirements of the intended sprayer.
When should I replace a ControlMax spray hose?
Replace the hose if it leaks, develops cracks, suffers severe abrasion or kinking, or has damaged fittings that compromise safe operation.
Where can I buy Titan 353-706 25' Hose?
Visit AllTitanParts to view the Titan 353-706 25-foot spray hose and related replacement components.
No reviews yet. Be the first to review this product!