Genuine Titan OEM | Performer 640i High Rider Parts
Shop Titan Performer 640i High Rider Assembly Parts
Keep your Titan Performer 640i Airless Sprayer supported and ready for transport with genuine OEM High Rider Assembly replacement parts. Shop sleeve handles, wheel spacers, hub caps, snap buttons, washers, mounting screws, lock nuts and protective plugs. Use the factory exploded parts diagram to identify the correct component and order from AllTitanParts.
High Rider Assembly Overview
Buy Genuine Titan Performer 640i High Rider Replacement Parts
The High Rider Assembly provides the support and transport arrangement used with the Titan Performer 640i Airless Sprayer. Its handle and wheel-related hardware help make the sprayer easier to position, move and secure during normal jobsite use.
Repeated transportation, vibration, loading and exposure to demanding work environments can contribute to worn handle components, loose mounting hardware, damaged wheel spacers or missing protective caps. Replacing the correct OEM parts helps maintain the assembly's intended configuration and usability.
At AllTitanParts, you can shop 13 listed OEM components, including the 590-504 Sleeve Handle, 0294534 Wheel Spacer, 9890104 Hub Cap, 9841504 Snap Button and 763-549 Lock Nut. Select your replacement by matching the factory diagram reference and Titan part number.
OEM Parts Directory
Titan Performer 640i High Rider Assembly Parts List
Use the diagram reference and OEM part number to find the correct High Rider replacement. The following 13 products are listed in the AllTitanParts category.
| Diagram Ref. | Titan Part Number | OEM Description |
|---|---|---|
| 2 | 590-506 | Flat Washer |
| 3 | 590-508 | Roll Pin |
| 4 | 590-504 | Sleeve Handle |
| 5 | 856-921 | Screw |
| 6 | 856-002 | Lock Washer |
| 8 | 0294534 | Wheel Spacer |
| 9 | 9890104 | Hub Cap, replaces Titan 704-355 |
| 12 | 293518 | Hexagonal Screw, replaces Titan 756-091 |
| 13 | 763-549 | Lock Nut |
| 14 | 9841504 | Snap Button |
| 15 | 761-178 | Hexagonal Flange Screw |
| 16 | 0294635 | Plug |
| 18 | 9885571 | Plug |
Featured OEM Components
Shop Titan Performer 640i Handle, Wheel and Mounting Parts
Titan 590-504 Sleeve Handle
The Titan 590-504 Sleeve Handle provides a gripping surface for handling and moving the sprayer. Replace a worn, cracked or damaged sleeve with the specified OEM component to maintain a comfortable and secure handling surface.
OEM Part: 590-504 | Ref. 4Titan 0294534 Wheel Spacer
The Titan 0294534 Wheel Spacer is a factory-listed wheel mounting component. It helps maintain the intended spacing of wheel-related hardware. Inspect it for deformation, damage or excessive wear when servicing the wheel mounting arrangement.
OEM Part: 0294534 | Ref. 8Titan 9890104 Hub Cap
The Titan 9890104 Hub Cap is an OEM wheel hub component listed as replacing Titan 704-355. Use the correct hub cap to restore the specified wheel hardware configuration when the original cap is missing or damaged.
OEM Part: 9890104 | Replaces 704-355Titan 9841504 Snap Button
The Titan 9841504 Snap Button is a spring-loaded retaining component. It helps secure the applicable handle or adjustable assembly position. Inspect the button for proper engagement before moving the sprayer.
OEM Part: 9841504 | Ref. 14Titan 590-508 Roll Pin
The Titan 590-508 Roll Pin is a retaining fastener used at its designated location in the High Rider Assembly. Replace damaged or missing pins using the exact factory part number.
OEM Part: 590-508 | Ref. 3Titan 590-506 Flat Washer
The Titan 590-506 Flat Washer helps distribute fastening loads across the mating surface. Correct washers are important for maintaining the intended hardware arrangement during reassembly.
OEM Part: 590-506 | Ref. 2Titan 856-921 Screw
The Titan 856-921 Screw is factory-listed mounting hardware for the High Rider Assembly. Use the OEM fastener to replace damaged or missing screws at the corresponding diagram location.
OEM Part: 856-921 | Ref. 5Titan 856-002 Lock Washer
The Titan 856-002 Lock Washer is used with designated mounting hardware to help maintain fastening security. Replace distorted or damaged washers with the specified OEM part.
OEM Part: 856-002 | Ref. 6Titan 293518 Hexagonal Screw
The Titan 293518 Hexagonal Screw is an OEM fastener listed as replacing Titan 756-091. Confirm the mounting position and replacement number before ordering.
OEM Part: 293518 | Replaces 756-091Titan 763-549 Lock Nut
The Titan 763-549 Lock Nut is a factory-listed retaining fastener. Use the specified nut to restore the correct hardware configuration when the original is worn, damaged or missing.
OEM Part: 763-549 | Ref. 13Titan 761-178 Hexagonal Flange Screw
The Titan 761-178 Hexagonal Flange Screw is an OEM mounting component. Its flange-style head provides an integrated bearing surface at the designated fastening location.
OEM Part: 761-178 | Ref. 15Titan 0294635 Plug
The Titan 0294635 Plug is a factory-listed protective component used at its designated assembly opening. Replace a missing or damaged plug using the correct OEM reference.
OEM Part: 0294635 | Ref. 16Titan 9885571 Plug
The Titan 9885571 Plug is another OEM component used to close or protect a designated opening in the High Rider Assembly. Match its diagram reference rather than assuming it is interchangeable with other plugs.
OEM Part: 9885571 | Ref. 18Assembly Component Guide
How Titan Performer 640i High Rider Components Work Together
Handle Support
The sleeve handle provides the operator's gripping surface, while the snap button and retaining hardware support the designated handle arrangement.
Wheel Hardware
Wheel spacers and hub caps support the specified positioning and retention arrangement of the cart's wheel components.
Fastening Security
Screws, washers, roll pins and lock nuts secure the assembly at their designated mounting locations.
Opening Protection
Factory-specified plugs cover designated openings and help maintain the intended finished assembly.
Troubleshooting Guide
Common Titan Performer 640i High Rider Assembly Problems
Use these observations as inspection guidance. Confirm the actual fault and follow the manufacturer service instructions before replacing components.
| Observed Problem | Parts to Inspect | Recommended Action |
|---|---|---|
| Handle grip is cracked or worn | 590-504 | Inspect the sleeve handle and replace it if damaged. |
| Handle retaining button does not engage | 9841504, 590-508 | Check the button and related retaining hardware for damage or obstruction. |
| Wheel mounting hardware is loose | 0294534, 9890104, 763-549 | Inspect wheel spacing and retaining components using the factory diagram. |
| Hub cap is missing | 9890104 | Confirm the original hub cap part number and replace it with the listed OEM component. |
| Mounting fastener is missing | 856-921, 293518, 761-178 | Match the exact screw to the corresponding diagram reference. |
| Washer is damaged or deformed | 590-506, 856-002 | Replace the affected washer with the correct type and OEM number. |
| Protective plug is missing | 0294635, 9885571 | Identify the opening and select the matching plug. |
OEM Replacement References
Titan Performer 640i High Rider Replacement Part Numbers
The current AllTitanParts product listings identify the following replacement numbers for older Titan hardware.
| Current OEM Part | Replaces | Description |
|---|---|---|
| 9890104 | 704-355 | Hub Cap |
| 293518 | 756-091 | Hexagonal Screw |
Verify your sprayer model and the original part number before ordering.
OEM Buying Guide
How to Choose the Correct Titan Performer 640i High Rider Parts
Confirm the Sprayer
Verify that your machine is a Titan Performer 640i and identify its High Rider configuration.
Inspect the Component
Identify whether the required replacement is a handle component, wheel spacer, cap, plug or fastener.
Match the Diagram
Locate the component on the exploded drawing and confirm its exact OEM part number.
Order the Replacement
Purchase the identified component from the Titan Performer 640i High Rider Assembly category.
Preventive Maintenance
Maintain Your Titan Performer 640i High Rider Assembly
Inspect the Handle
Check the sleeve handle and snap button for wear, cracks and secure engagement.
Check Wheel Hardware
Inspect wheel spacers, hub caps and retaining components for damage or looseness.
Secure Mounting Hardware
Check screws, nuts, washers and pins according to the manufacturer's service instructions.
Replace Missing Plugs
Inspect protective plugs and replace missing components with the specified OEM parts.
Related Titan Performer 640i Categories
Shop More Titan Performer 640i Airless Sprayer Parts
Performer 640i Motor Assembly
Shop motor-related OEM replacement parts and electrical service components.
Performer 640i Gear Box Assembly
Find gears, crankshaft components and pressure-control replacement parts.
Performer 640i Fluid Section Assembly
Shop pump packings, pistons, inlet valves and fluid-section components.
Performer 640i Airless Sprayer Parts
Browse the complete model parts directory and additional assembly diagrams.
High Rider Assembly Service Safety
Before inspecting or repairing the Titan Performer 640i High Rider Assembly, switch off the sprayer, disconnect electrical power and follow Titan's pressure-relief procedure. Place the sprayer on a stable surface and support it securely before removing wheel-related hardware. Never move or operate the sprayer with loose, damaged or improperly secured cart components. Follow manufacturer instructions when reinstalling handles, fasteners and retaining hardware.
Genuine Titan OEM High Rider Parts
Order Titan Performer 640i High Rider Parts Today
Shop Titan sleeve handles, wheel spacers, hub caps, snap buttons, washers and OEM mounting hardware. Find the correct part using the factory diagram at AllTitanParts.
Shop Performer 640i High Rider PartsFrequently Asked Questions
Titan Performer 640i High Rider Assembly FAQ
How many OEM parts are listed for the Titan Performer 640i High Rider Assembly?
The AllTitanParts category currently lists 13 genuine Titan OEM replacement parts.
What is the Titan Performer 640i sleeve handle part number?
Titan 590-504 is the Sleeve Handle listed at diagram reference 4.
What is the Titan Performer 640i wheel spacer part number?
Titan 0294534 is the Wheel Spacer listed at diagram reference 8.
Which Titan hub cap replaces part number 704-355?
Titan 9890104 is listed as the replacement for Titan 704-355.
Which Titan screw replaces part number 756-091?
Titan 293518 is the Hexagonal Screw listed as replacing Titan 756-091.
What is the snap button part number for the High Rider Assembly?
Titan 9841504 is the Snap Button listed at diagram reference 14.
What is the difference between Titan 590-506 and Titan 856-002?
Titan 590-506 is a Flat Washer, while Titan 856-002 is a Lock Washer. They serve different fastening functions and should not be treated as interchangeable.
What lock nut is listed for the Performer 640i High Rider Assembly?
Titan 763-549 is the Lock Nut listed at diagram reference 13.
Are Titan 0294635 and 9885571 plugs interchangeable?
Do not assume interchangeability. These are separate OEM part numbers at different diagram references. Select the correct plug for the intended opening.
Can I use Low Rider cart parts on the Performer 640i High Rider?
Some Titan hardware may be used across multiple assemblies, but compatibility must be confirmed by matching the exact OEM part number and applicable factory parts diagram.
Does this category list a complete High Rider wheel or axle?
The current category lists wheel-related hardware such as a spacer and hub cap, but does not list a complete wheel or axle as a separate product. Contact AllTitanParts for assistance identifying additional components.
Where can I buy genuine Titan Performer 640i High Rider Assembly Parts?
Shop Titan Performer 640i High Rider Assembly Parts at AllTitanParts and match your replacement to the factory diagram.
Titan OEM Parts Assistance
Need Help Finding Titan Performer 640i High Rider Parts?
Have your sprayer model, serial number and diagram reference ready when requesting help identifying the correct OEM replacement.
713-931-0006









