Genuine Titan OEM | High Rider Siphon Parts
Shop Titan Performer 640i Siphon Tube Assembly Parts
Restore reliable coating intake and priming performance with genuine Titan Performer 640i Siphon Tube Assembly (High Rider) replacement parts. Shop the 755-225 Down Tube, 710-046 Inlet Screen and 702-239 Bypass Hose at AllTitanParts. Identify the correct component from the factory parts diagram and order the replacement you need.
Assembly Overview
Buy Genuine Titan Performer 640i High Rider Siphon Tube Parts
The siphon tube assembly forms an important part of the material-handling system on the Titan Performer 640i Airless Sprayer. It supports the movement of coating material from the supply container toward the pump and provides a return path for material during priming and pressure relief.
The High Rider configuration uses a down tube to reach the coating supply, an inlet screen to help keep larger debris out of the pump, and a bypass hose to return material during the priming process. Together, these components help maintain a clear and correctly connected fluid path.
When a down tube is damaged, an inlet screen becomes obstructed or a bypass hose develops a leak, the sprayer may become difficult to prime or may not operate as expected. AllTitanParts offers the three separately listed OEM replacement components so you can identify and replace the affected part without assuming that every component needs replacement.
OEM Parts Directory
Titan Performer 640i Siphon Tube Assembly Parts List
Match each component to its diagram reference and Titan OEM part number before ordering.
| Diagram Ref. | Titan OEM Number | Part Description | Primary Function |
|---|---|---|---|
| 1 | 755-225 | Down Tube | Draws coating material toward the pump inlet |
| 2 | 710-046 | Inlet Screen, 10 Mesh | Screens debris before material enters the pump |
| 3 | 702-239 | Bypass Hose | Provides a material return path during priming |
Featured OEM Replacements
Shop the Three Titan Performer 640i Siphon Components
DIAGRAM REF. 1
Titan 755-225 Down Tube
The Titan 755-225 Down Tube is an OEM suction component used with the Performer 640i High Rider siphon arrangement. It connects the coating supply path to the sprayer's fluid section and helps deliver material from the container toward the pump inlet.
A damaged, improperly seated or obstructed down tube may interfere with material intake and contribute to priming difficulties. Inspect the tube and its connections when diagnosing suction-related problems.
OEM Part Number: 755-225
Find Titan 755-225DIAGRAM REF. 2
Titan 710-046 Inlet Screen
The Titan 710-046 Inlet Screen is an OEM 10-mesh stainless steel filter designed to screen larger particles and debris before coating material enters the sprayer's pumping system.
A blocked or damaged inlet screen can restrict material intake and contribute to reduced flow or difficult priming. Inspect and clean the screen according to the manufacturer's maintenance instructions, and replace it when damaged or unsuitable for continued use.
OEM Part Number: 710-046
Find Titan 710-046DIAGRAM REF. 3
Titan 702-239 Bypass Hose
The Titan 702-239 Bypass Hose is an OEM return hose for the Performer 640i siphon system. During priming, the bypass line carries returned coating material from the sprayer back toward the supply container.
Inspect the bypass hose for cracking, kinks, leakage and loose connections. A damaged return line may create a mess, interrupt proper priming or compromise the intended return path.
OEM Part Number: 702-239
Find Titan 702-239Understanding the Siphon System
How the Titan Performer 640i High Rider Siphon Assembly Works
Material Intake
The down tube provides the intake route through which coating material is drawn from the container toward the sprayer.
Debris Screening
The 10-mesh inlet screen helps stop larger particles from entering the pump through the suction path.
Priming Return
The bypass hose provides a return route for material during the priming process.
Pump Supply
A clear intake path and properly connected siphon components help the fluid section receive coating material consistently.
Troubleshooting Guide
Common Titan Performer 640i Siphon Tube Problems
These symptoms may also result from problems elsewhere in the sprayer. Confirm the actual cause using the Titan troubleshooting procedure before purchasing replacement parts.
| Symptom | Component to Inspect | Recommended Check |
|---|---|---|
| Sprayer will not prime | 755-225 Down Tube, 710-046 Inlet Screen | Check for intake blockage, loose connections, insufficient material or air entering the suction path. |
| Material intake is restricted | 710-046 Inlet Screen | Inspect the screen for accumulated debris and clean or replace as required. |
| Air bubbles appear during priming | 755-225 Down Tube and connections | Inspect the intake path for leaks and improperly seated connections. |
| Material leaks from the return line | 702-239 Bypass Hose | Check for cracks, damaged hose material and loose fittings. |
| Return flow is obstructed | 702-239 Bypass Hose | Inspect the return hose for kinks, clogs or incorrect routing. |
| Spray output fluctuates | 755-225, 710-046 and pump inlet components | Check suction restrictions first, then inspect pump valves, packings and pressure controls as directed. |
Fitment and Configuration
Why High Rider Siphon Tube Compatibility Matters
The Performer 640i High Rider configuration uses a siphon arrangement designed for its specific sprayer layout. The length, connection arrangement and routing of the intake and return components must match the applicable parts diagram.
Although some Titan sprayers use similar-looking down tubes, screens and bypass hoses, appearance alone does not establish compatibility. A Low Rider or another 640i-series siphon component should not be substituted without confirming the exact OEM part number.
Before ordering: Verify your machine's model, cart configuration, serial information and diagram reference. For help, contact AllTitanParts with the details of your existing component.
OEM Buying Guide
How to Order the Correct Performer 640i Siphon Tube Replacement
Confirm Your Model
Identify your sprayer as the Titan Performer 640i and verify that it uses the High Rider configuration.
Identify the Component
Determine whether the required part is the down tube, inlet screen or bypass hose.
Match the OEM Number
Compare the factory exploded diagram with part numbers 755-225, 710-046 and 702-239.
Buy from AllTitanParts
Select the matching OEM replacement and follow Titan's service procedure during installation.
Preventive Maintenance
Maintain Your Titan Performer 640i Siphon Tube Assembly
Keep the Screen Clear
Inspect the 710-046 inlet screen regularly and remove accumulated material according to Titan's cleaning instructions.
Inspect the Down Tube
Check the 755-225 down tube for damage, obstruction and secure connections before use.
Protect the Bypass Hose
Inspect the 702-239 hose for cracks, leaks and kinks. Keep the return line properly routed during priming.
Flush After Spraying
Follow Titan's approved flushing and storage instructions to reduce coating buildup in the fluid path.
Related Titan Performer 640i Parts
Shop More Titan Performer 640i Assembly Parts
Performer 640i Fluid Section Assembly
Find pump packings, piston components, inlet valves and other fluid-section repair parts.
Performer 640i High Rider Assembly
Shop handle components, wheel mounting hardware and High Rider cart parts.
Performer 640i Gear Box Assembly
Browse gears, crankshaft components and pressure-control replacements.
Performer 640i Motor Assembly
Find genuine Titan motor and electrical service parts.
Performer 640i Airless Sprayer Parts
Explore the complete model directory and factory assembly diagrams.
Siphon Tube and Bypass Hose Service Safety
Airless spraying equipment can contain hazardous pressurized fluid. Before inspecting, disconnecting or replacing siphon and return components, turn off the sprayer, disconnect electrical power and follow Titan's complete pressure-relief procedure. Never attempt to stop a fluid leak with your hand. Confirm that all hoses and tubes are correctly connected and secured before restarting the machine.
Genuine Titan OEM Siphon Replacement Parts
Order Titan Performer 640i Siphon Tube Parts Today
Shop the Titan 755-225 Down Tube, 710-046 Inlet Screen and 702-239 Bypass Hose for the Performer 640i High Rider siphon arrangement. Find your OEM replacement at AllTitanParts.
Shop Performer 640i Siphon Tube PartsFrequently Asked Questions
Titan Performer 640i Siphon Tube Assembly FAQ
How many parts are listed for the Performer 640i High Rider Siphon Tube Assembly?
The AllTitanParts category currently lists three OEM parts: Titan 755-225 Down Tube, Titan 710-046 Inlet Screen and Titan 702-239 Bypass Hose.
What is the Titan Performer 640i High Rider down tube part number?
Titan 755-225 is the Down Tube listed at diagram reference 1.
What inlet screen fits the Titan Performer 640i High Rider siphon assembly?
Titan 710-046 is the OEM 10-mesh Inlet Screen listed at diagram reference 2.
What is the Performer 640i bypass hose part number?
Titan 702-239 is the Bypass Hose listed at diagram reference 3.
What does the Titan 755-225 Down Tube do?
The down tube forms part of the suction path that draws coating material from the supply container toward the sprayer's pump inlet.
Why does the Titan Performer 640i need an inlet screen?
The inlet screen helps prevent larger debris from entering the pumping system. A clogged screen may restrict material intake and contribute to priming problems.
What is the function of the Titan 702-239 Bypass Hose?
The bypass hose provides a return path for coating material during the priming process. It should remain properly routed and free of damage or obstruction.
Why is my Titan Performer 640i not priming?
Possible causes include a clogged inlet screen, intake restrictions, air leaks in the suction path, low material level or faults in the pump and Prime/Spray valve. Use Titan's troubleshooting procedure to confirm the cause.
Can I replace the inlet screen without replacing the down tube?
Yes. The inlet screen and down tube are separately listed replacement products. Replace only the affected component when the remaining parts are serviceable.
Can I use a Low Rider siphon tube on the High Rider model?
Do not assume compatibility between different cart configurations. Confirm the OEM part number and applicable factory parts diagram before substituting any component.
How do I identify the correct Performer 640i siphon part?
Check your sprayer's model and High Rider configuration, locate the component in the exploded parts diagram and match its Titan OEM number before ordering.
Where can I buy Titan Performer 640i High Rider Siphon Tube Assembly Parts?
Shop Titan Performer 640i Siphon Tube Assembly Parts at AllTitanParts. Use the factory diagram to select the correct replacement.
Titan OEM Parts Assistance
Need Help Finding Performer 640i Siphon Tube Parts?
Have your Titan Performer 640i model, serial number and diagram reference ready when requesting assistance with the down tube, inlet screen or bypass hose.
713-931-0006