Titan Impact 400 Suction Set Assembly Parts P/N 0558672A
Find genuine OEM Titan Impact 400 Suction Set Assembly Parts P/N 0558672A for servicing the material-intake side of your Impact 400 airless sprayer. Use the exploded assembly diagram to locate the required suction component, identify its numbered callout, and match it with the corresponding Titan OEM part number before ordering.
Keep Material Feeding Properly to Your Impact 400
The suction set forms the material-intake path between the coating container and the pump inlet. Its components must remain properly connected, unobstructed, sealed, and in serviceable condition so the Impact 400 can draw coating into the pump during priming and spraying.
If the sprayer has difficulty priming or drawing material, inspect the complete suction path before replacing components. Loose connections, damaged hoses or tubes, restricted inlet components, worn fittings, or other intake-side problems can interfere with material flow.
What Does the Impact 400 Suction Set Do?
During operation, the suction system provides the path through which coating material travels from its container toward the pump inlet. Maintaining an unrestricted and properly sealed intake path is important for dependable priming and material delivery.
Problems anywhere along this path can affect the sprayer's ability to draw material. When servicing the suction set, inspect related connections and intake components rather than assuming that the first visibly worn part is the only source of the problem.
Suction Set Components to Inspect
Refer to the 0558672A exploded diagram for the exact components used in the assembly. Depending on the service area, inspection may include the following types of material-intake components.
Inspect the material-intake path for damage, restriction, deterioration, loose connections, or conditions that could allow air into the system.
Inspect applicable intake filtration components for accumulated debris, coating buildup, physical damage, or restriction.
Check applicable fittings and connections for looseness, wear, damage, leakage, or other conditions that could affect the intake path.
Verify that applicable clamps, retainers, and related hardware are present, correctly positioned, and serviceable.
Find Your Impact 400 Suction Parts Faster
Start with the Suction Set Assembly P/N 0558672A exploded diagram. Use the numbered callouts to move from the component on your machine to the corresponding Titan OEM replacement part.
Inspect the suction path and determine which component requires service.
Find the component on the Impact 400 Suction Set Assembly drawing.
Match the diagram callout with the corresponding Titan OEM part number.
Verify the Impact 400 application, assembly number, and exact part number before ordering.
Having Trouble Priming Your Impact 400?
Difficulty drawing coating does not automatically mean the pump requires replacement. Start by inspecting the material-intake path for restrictions, loose connections, damaged components, air-entry points, or other conditions that could interfere with material reaching the pump.
If the suction set checks out correctly, continue diagnosis using the appropriate Impact 400 main and drive assembly information and the applicable Titan service documentation.
Impact 400 Suction System Inspection Guide
| Symptom | What to Inspect | Possible Intake-Side Issue |
|---|---|---|
| Sprayer will not prime | Complete suction path and connections | Restriction, loose connection, air entry, or damaged component |
| Slow material intake | Intake filter / strainer and suction components | Debris, coating buildup, restriction, or damaged intake component |
| Air appears to enter the material path | Hose, tube, fittings, joints and connections | Loose, damaged, or poorly sealed intake-side connection |
| Visible material leakage | Connections, fittings and damaged suction components | Loose fitting, damaged component, or deteriorated connection |
Suction Set Maintenance Guidance
Prevent dried coating and debris from accumulating in applicable suction and filtration components.
Check suction-side connections and fittings for damage or looseness when priming performance changes.
Use the exploded diagram and exact OEM part number to identify damaged or worn suction components requiring replacement.
Explore More Titan Impact 400 Parts
If your repair extends beyond the suction set, use the dedicated Impact 400 assembly pages to move directly to the machine system you need.
Confirm Your Impact 400 Suction Part Before Ordering
Suction tubes, hoses, strainers, fittings, clamps, and related material-intake components may look similar across Titan sprayers. Visual similarity alone does not confirm that a component is correct for your machine.
Confirm the Impact 400 application and Suction Set Assembly P/N 0558672A, locate the required component on the exploded diagram, and match its numbered callout with the exact Titan OEM part number before ordering.
Shop Titan Impact 400 Suction Set Assembly Parts
Use the 0558672A exploded suction-set diagram to identify the genuine Titan OEM component your Impact 400 requires, verify its part number, and select the correct replacement.
Find Impact 400 Suction PartsTitan Impact 400 Suction Set Assembly FAQs
What is Titan Impact 400 Suction Set Assembly P/N 0558672A?
P/N 0558672A identifies the suction-set assembly section used to locate material-intake components for the applicable Titan Impact 400 configuration.
How do I find the correct Impact 400 suction part?
Locate the required component on the 0558672A exploded diagram, identify its numbered callout, and match that callout with the corresponding Titan OEM part number.
Can a suction problem cause the Impact 400 to have trouble priming?
Yes. Restrictions, loose connections, damaged intake components, or air entering the suction path can interfere with material reaching the pump. Diagnose the complete system before replacing parts.
What should I inspect if the Impact 400 will not draw paint?
Inspect the applicable suction tube or hose, intake filter or strainer, fittings, connections, clamps, and the rest of the material-intake path before continuing diagnosis elsewhere in the sprayer.
Are these genuine Titan OEM suction-set parts?
AllTitanParts specializes in genuine OEM Titan replacement parts. Verify the component using the Impact 400 suction-set diagram and exact Titan part number before ordering.
Can I choose an Impact 400 suction component by appearance?
No. Similar-looking intake components may have different dimensions, connections, or applications. Use the exploded diagram and exact OEM part number for identification.
Where can I find other Titan Impact 400 replacement parts?
Browse the complete Impact 400 category for Main Assembly, Skid Assembly, Drive Assembly Parts I and II, Cart Assembly P/N 0532229A, Suction Set Assembly P/N 0558672A, Accessories, and other applicable OEM parts.