Please wait while we process your order...

Parts list · 3 parts

Titan Accessories

Genuine Titan OEM parts for Titan Accessories, matched to the official factory parts diagram. Search a part number, or call us and we'll confirm the fit before you order.

Parts list

Shop all 3 parts

Titan 0291002 Hose Pnt,Arlss −8%
Titan
Titan 0291002 Hose Pnt,Arlss
Part #: 0291002
$80.51 $87.80 Save $7.29
Buy Now
Titan 0538005 RX-80 Airless Spray Gun (Replaces Titan 296329) −14%
Titan
Titan 0538005 RX-80 Airless Spray Gun (Replaces Titan 296329)
Part #: 0538005
$220.33 $255.90 Save $35.57
Buy Now
Titan 0297078 Tip Guard / Seal Assembly F-Thread. −8%
Titan
Titan 0297078 Tip Guard / Seal Assembly F-Thread.
Part #: 0297078
$38.62 $41.80 Save $3.18
Buy Now
Buying guide

Titan Accessories: what to know before you buy

Titan EPX2455 Advantage Series Piston Pump

Titan Accessories: Spray Gun, Airless Hose and Tip Guard Parts

Keep your Titan EPX2455 Advantage Series Piston Pump equipped for professional coating applications with the right spraying accessories. At AllTitanParts, shop the Titan accessories listed for this model, including the Titan 0291002 Airless Paint Hose, Titan 0538005 RX-80 Airless Spray Gun, and Titan 0297078 F-Thread Tip Guard/Seal Assembly. Identify the correct manufacturer part number, review the intended function, and select replacement accessories with confidence.

Airless Spray Hose RX-80 Spray Gun F-Thread Tip Guard

Accessories Overview

Buy Titan EPX2455 Advantage Series Accessories Online

The Titan Accessories category for the EPX2455 Advantage Series Piston Pump brings together essential components used in the sprayer's coating delivery and application system. These accessories help carry pressurized material from the pump, control coating discharge at the spray gun, and secure the spray tip arrangement.

Whether you are maintaining a contractor's airless sprayer, replacing a worn spray gun, or addressing damage to a high-pressure hose, choosing the correct accessories helps preserve the equipment's intended operation and safety.

This category currently lists three distinct Titan products. Each serves a specific purpose, so it is important to match the correct part number rather than selecting a replacement based only on appearance.

Explore the products below, check the applicable Titan documentation, and verify the installed accessory configuration before placing your order.

Available Accessory Listings

Titan EPX2455 Accessories and Part Numbers

The following three products are listed in the AllTitanParts EPX2455 Advantage Series accessories category.

PART NUMBER: 0291002

Titan 0291002 Airless Paint Hose

The Titan 0291002 hose is listed as an airless paint hose. It provides a designated fluid delivery connection between compatible spraying equipment components.

Primary function: Transport pressurized coating material through the approved spraying system.

Replacement considerations: Inspect for cuts, abrasion, kinks, damaged hose ends, or leakage. Verify pressure rating, dimensions, and fittings against the manufacturer specification.

Ordering reference: Titan 0291002.

PART NUMBER: 0538005

Titan 0538005 RX-80 Airless Spray Gun

The Titan RX-80 Airless Spray Gun is designed for operator-controlled coating application in compatible airless spraying systems.

Primary function: Control coating discharge through an approved spray tip and guard arrangement.

Replacement considerations: Inspect the gun for leakage, trigger-related problems, damaged connections, and wear requiring manufacturer-approved service.

Ordering reference: Titan 0538005, listed as replacing Titan 296329.

PART NUMBER: 0297078

Titan 0297078 F-Thread Tip Guard/Seal Assembly

The Titan 0297078 is listed as an F-thread tip guard and seal assembly for a compatible spraying arrangement.

Primary function: Provide the specified spray tip guard mounting and sealing interface.

Replacement considerations: Confirm the gun's thread configuration, compatible spray tip system, and approved sealing components before installation.

Ordering reference: Titan 0297078.

Technical and Ordering Details

Titan EPX2455 Accessories Specifications and Applications

Specification Details
Category Name Titan Accessories
Associated Sprayer Titan EPX2455 Advantage Series Piston Pump
Accessory Part Numbers Titan 0291002, Titan 0538005, Titan 0297078
Product Types Airless paint hose, RX-80 spray gun, F-thread tip guard/seal assembly
Primary Function Support pressurized fluid delivery, operator-controlled spraying, and the specified spray tip mounting arrangement.
Industrial Applications Professional coating application, industrial maintenance painting, facility maintenance, and equipment refurbishment, subject to coating and equipment specifications.
Commercial Applications Residential and commercial painting, property maintenance, remodeling, and contractor-operated airless spraying.
Compatible Assemblies The designated EPX2455 accessory configuration; individual hose, gun, and guard interfaces must be checked before installation.
Related Components Fluid section, filter assembly, spray tip, compatible hose fittings, and gun service components.
Common Problems Addressed Damaged spray hoses, worn or malfunctioning spray guns, and damaged or unsuitable tip guard/seal arrangements.
Compatibility Verification Check the manufacturer part number, sprayer configuration, pressure rating, connection specifications, and applicable service documentation.
Ordering Source AllTitanParts.com

How the Accessories Work Together

From the EPX2455 Pump to the Finished Spray Pattern

01

Pump Pressurization

The fluid section supplies pressurized coating material to the sprayer's designated outlet system.

02

Hose Delivery

A compatible high-pressure hose transports coating material toward the spray gun.

03

Gun Operation

The RX-80 spray gun provides operator-controlled discharge when installed in an approved configuration.

04

Tip and Guard

A correctly matched tip, guard, and seal arrangement supports the intended coating discharge and spray pattern.

Repair and Troubleshooting

Common Titan EPX2455 Accessory Problems

Not every spraying problem originates inside the pump. Inspecting the external accessories can help distinguish hose, gun, and tip guard issues from fluid section or filtration problems.

Problem Possible Cause Recommended Inspection
Visible hose damage Abrasion, impact, kinking, or deterioration Inspect Titan 0291002 and replace the complete hose if damaged.
Leakage at the gun inlet Damaged fitting or incorrect connection Check approved hose-to-gun fittings and sealing interfaces.
Spray gun fails to shut off correctly Contamination or worn gun components Inspect the RX-80 gun using its manufacturer service instructions.
Leakage near the spray tip Incorrect guard installation, worn seal, or mismatched tip Check the tip, guard, and seal configuration, including Titan 0297078 where applicable.
Uneven spray pattern Worn tip, blocked tip, incorrect pressure, or filtration restriction Inspect the spray tip and filter system before replacing unrelated components.
Reduced coating delivery Hose restriction, gun blockage, or upstream pump issue Check the hose, gun, filter assembly, and fluid section.

Ordering and Compatibility

How to Order the Correct Titan EPX2455 Accessories

  1. Confirm the model: Identify your equipment as a Titan EPX2455 Advantage Series Piston Pump and check its model and serial information.
  2. Identify the accessory: Determine whether you need the hose, RX-80 spray gun, or F-thread tip guard/seal assembly.
  3. Match the part number: Use Titan 0291002, 0538005, or 0297078 as applicable.
  4. Verify the connections: Confirm hose fitting sizes, gun inlet compatibility, tip guard thread type, and sealing arrangement.
  5. Check operating requirements: Ensure every accessory meets the sprayer's pressure and coating compatibility requirements.
  6. Review the product listing: Confirm the exact item, quantity, and any documented replacement part information before ordering.

Important: Titan 0538005 is listed as replacing Titan 296329. This documented replacement relationship does not automatically establish compatibility with every spray gun, guard, or sprayer configuration.

Preventive Maintenance

Keep Your Titan EPX2455 Spraying Accessories in Good Condition

Inspect the Hose

Check for cuts, bulges, abrasion, kinks, leaks, and damaged end fittings before each use.

Clean the Spray Gun

Follow the RX-80 manufacturer's cleaning and flushing instructions to reduce coating buildup.

Inspect Tip Guard Seals

Check for damaged or incorrectly positioned seals before returning the gun to service.

Maintain Proper Connections

Use approved fittings and follow the manufacturer installation instructions.

Inspect the Spray Pattern

Check for changes that may indicate a worn tip, blockage, or inconsistent fluid delivery.

Store Accessories Safely

Protect hoses, guns, guards, and seals from crushing, contamination, and unsuitable storage conditions.

Related EPX2455 Parts

Some spraying symptoms involve more than the external accessories. Use the related parts categories to investigate the appropriate system before purchasing replacement components.

Fluid Section Assembly

Review pump components when the sprayer has confirmed material intake or pressure-generation problems.

Filter Assembly

Inspect filtration components when debris or flow restrictions affect spraying performance.

Suction Set Assembly

Explore the intake system when priming or material supply problems originate before the pump inlet.

Titan Airless Sprayer Accessory Safety

Airless spraying equipment can produce hazardous fluid pressure. High-pressure fluid injection injuries can be severe even when the skin wound appears small.

  • Turn off the sprayer and follow the complete manufacturer pressure-relief procedure before removing or servicing accessories.
  • Never point the spray gun toward yourself or another person.
  • Always use the approved spray tip guard and functional trigger safety arrangement.
  • Never repair a damaged high-pressure hose using tape, clamps, or unauthorized fittings.
  • Confirm that the hose, gun, guard, fittings, and other accessories are suitable for the maximum operating pressure.
  • Follow the manufacturer requirements for grounding, ventilation, protective equipment, and coating compatibility.

Emergency warning: Suspected fluid injection injuries require immediate emergency medical treatment.

Frequently Asked Questions

Titan EPX2455 Accessories FAQ

What accessories are listed for the Titan EPX2455 Advantage Series?

The category lists Titan 0291002 Airless Paint Hose, Titan 0538005 RX-80 Airless Spray Gun, and Titan 0297078 F-Thread Tip Guard/Seal Assembly.

What is the Titan 0291002 used for?

Titan 0291002 is listed as an airless paint hose. It provides a fluid delivery connection within a compatible high-pressure spraying system.

What is the Titan 0538005 RX-80 Airless Spray Gun?

It is an airless spray gun used to control coating discharge in an approved spraying arrangement. The listing identifies Titan 0538005 as replacing Titan 296329.

What does Titan 0297078 include?

Titan 0297078 is identified as an F-thread tip guard/seal assembly. Confirm its included components and compatible spray tip system on the individual product listing.

Can I use any spray hose with the EPX2455?

No. Use an approved hose with the correct pressure rating, dimensions, fittings, and material compatibility.

Does Titan 0538005 replace Titan 296329?

Yes. The AllTitanParts product listing identifies Titan 0538005 RX-80 Airless Spray Gun as replacing Titan 296329. Confirm the replacement's suitability for your installed equipment.

Can I replace a spray tip guard without replacing the entire gun?

Yes, when the replacement guard is approved for the installed spray gun, tip system, and connection type.

Why is coating leaking near the spray tip?

Possible causes include a damaged seal, incorrect guard installation, or an incompatible tip and guard combination. Relieve pressure before inspection.

When should an airless paint hose be replaced?

Replace a hose if it shows leakage, cuts, bulges, severe abrasion, damaged fittings, or other conditions identified as unsafe by the manufacturer.

Are EPX2455 accessories compatible with other Titan sprayers?

Some accessories may have broader applications, but compatibility must be verified using the manufacturer part number, pressure specifications, and documented fitment.

How do I find the correct Titan accessory part number?

Use the Titan EPX2455 parts documentation, identify the installed accessory, and compare the manufacturer's part number with the product listing.

Where can I get help ordering Titan EPX2455 accessories?

Contact AllTitanParts at 713-931-0006 with your sprayer model, serial information, and accessory part number.

AllTitanParts | Titan EPX2455 Accessories

Find the Right Titan Sprayer Accessories for Your EPX2455

From the Titan 0291002 Airless Paint Hose to the Titan 0538005 RX-80 Spray Gun and Titan 0297078 Tip Guard/Seal Assembly, AllTitanParts helps you identify the accessories listed for your EPX2455 Advantage Series Piston Pump. Review the product specifications and confirm fitment before ordering.

Need help matching a part number? Call 713-931-0006 for assistance.

Added to cart

Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart