SprayTech part 0291002 is an airless paint hose used to convey coating material from the sprayer to the spray gun under high pressure. This hose replaces worn, kinked, or leaking hoses to restore proper material flow and safe operation. It is compatible with a wide range of SprayTech airless sprayer models.
| Part Number | 0291002 |
|---|---|
| Part Description | Hose, pnt, arlss |
| Brand | SprayTech |
| Fits | SprayTech Airless Advantage EPX2455; SprayTech Airless Advantage EPX2555; SprayTech Airless EP2105; SprayTech Airless EP2205; SprayTech Airless EP2300 SE; SprayTech Airless EP2300; SprayTech Airless EP2400; SprayTech Airless EP2510; SprayTech Airless EPX2305; SprayTech Airless EPX2405; SprayTech Airless EPX2455; Spraytech Airless EPX2505; Spraytech Airless EPX2555; Spraytech ED1150; Spraytech GPX 80; Spraytech GPX 85; Spraytech GPX 130; Spraytech GPX 165; Spraytech GPX 220; Spraytech GPX 750; Spraytech GPX1250 |
| Condition | New |
The SprayTech 0291002 airless paint hose is a high pressure fluid delivery hose designed for use with a wide range of compatible SprayTech airless sprayers. This hose is intended for use on SprayTech Airless Advantage EPX2455, EPX2555, EP2105, EP2205, EP2300 SE, EP2300, EP2400, EP2510, EPX2305, EPX2405, EPX2455, EPX2505, EPX2555, ED1150, GPX 80, GPX 85, GPX 130, GPX 165, GPX 220, GPX 750, and GPX1250 models. The airless hose transports coating material from the sprayer pump outlet to the spray gun under operating pressure. Airless hoses are constructed with multiple layers including an inner tube compatible with a wide range of coatings, a reinforcing braid for pressure containment, and an outer cover that resists abrasion, chemicals, and weather. Over time, hoses may develop cuts, abrasions, kinks, or bulges that compromise safety and performance. A damaged hose can leak, burst under pressure, or restrict flow, leading to poor spray results and hazardous conditions. Replacing a worn or damaged hose with the 0291002 restores proper fluid delivery and operating safety. Before installation, inspect the sprayer outlet and gun inlet fittings for damage or debris. When installing a new hose, route it away from sharp edges, heat sources, and moving parts. Do not exceed the hose rated working pressure. Never use a damaged hose or attempt to repair a high pressure airless hose with tape or sealants. Always relieve pressure before disconnecting or inspecting the hose.
| Conveys coating material | Transports paint from sprayer to gun under pressure |
|---|---|
| Withstands high pressure | |
| Resists abrasion |
| Cuts or abrasion | Outer cover damage exposing inner reinforcement |
|---|---|
| Bulging or swelling | |
| Kinked hose | |
| Leaking fittings |
SprayTech part 0291002 is an airless paint hose compatible with the following sprayer models. Always confirm fitment using the correct parts diagram for your exact model.
| SprayTech Model | Component |
|---|---|
| SprayTech Airless Advantage EPX2455 | Airless paint hose |
| Additional compatible models: Advantage EPX2555, EP2105, EP2205, EP2300 SE, EP2300, EP2400, EP2510, EPX2305, EPX2405, EPX2455, EPX2505, EPX2555, ED1150, GPX 80, GPX 85, GPX 130, GPX 165, GPX 220, GPX 750, GPX1250 | |
When replacing an airless hose, these related components are often inspected or replaced at the same time.
Inspect for smooth rotation and signs of leakage at the hose connection.
Replace if flattened, cracked, or missing to ensure leak free connection.
Check for damage, thread wear, or debris that could affect seal.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
