Titan EP2105 Transducer Assembly Parts
Shop Titan EP2105 Transducer Assembly parts for service and repair of the pressure-sensing system on your EP2105 airless sprayer. Use the applicable exploded parts diagram to identify the transducer, mounting components, fittings, seals, connectors and related replacement parts by exact diagram callout and part number.
Find Titan EP2105 Transducer Assembly Replacement Parts
The EP2105 transducer assembly is associated with pressure sensing within the sprayer system. The transducer responds to fluid-system pressure so the applicable control system can use that information during sprayer operation.
Because pressure-control symptoms can originate from more than one component, diagnose the system before replacing the transducer. Use the EP2105 Transducer Assembly exploded illustration to locate the required component, match its numbered callout to the parts list and verify the exact part number, description and quantity before ordering.
How to Find the Correct EP2105 Transducer Part
Confirm EP2105
Verify the complete sprayer model before selecting pressure-sensing or transducer components.
Open the Assembly Diagram
Use the applicable EP2105 Transducer Assembly exploded illustration for parts identification.
Match the Callout
Locate the required component and note the numbered callout assigned to it in the illustration.
Verify Part & Quantity
Match the callout to the parts list and confirm the exact replacement part number and required quantity.
Understanding the EP2105 Transducer Assembly
The transducer forms part of the sprayer's pressure-sensing system. During operation, it provides pressure-related input used by the applicable control system. Correct transducer installation, electrical connection and fluid-side connection are therefore important to proper system operation.
Pressure Sensing
The transducer responds to pressure conditions within its applicable portion of the fluid system.
System Feedback
Pressure-related information from the transducer is used by the applicable sprayer control system during operation.
Fluid-Side Connection
Applicable fittings and sealing components connect the assembly to the pressure side of the fluid system.
Electrical Connection
The transducer's applicable wiring or connector provides the signal path to the sprayer control system.
EP2105 Transducer Assembly Components to Inspect
Inspect the transducer for visible physical damage and verify correct installation according to the applicable service documentation.
With electrical power safely isolated, inspect the applicable connector and wiring for damage, looseness or poor connection.
After relieving system pressure, inspect the transducer's applicable fluid connection for damage, leakage or improper installation.
Inspect diagram-listed seals or sealing surfaces when leakage is present near the transducer connection.
Check applicable brackets, retainers or mounting hardware for correct positioning and secure installation.
Pressure-control problems may involve components outside the transducer assembly, so inspect the related control system as required by the troubleshooting procedure.
EP2105 Pressure-Control Symptoms to Investigate
A pressure-control symptom does not automatically confirm a failed transducer. Pump wear, fluid restrictions, control components, connections and other system conditions can produce similar symptoms. Follow the applicable troubleshooting procedure before replacing parts.
| Symptom | What to Inspect | Repair Direction |
|---|---|---|
| Unstable Pressure | Inspect the fluid system, pump condition, applicable filters, transducer connection and pressure-control components. | Determine the actual source before replacing the transducer. |
| Pressure Does Not Respond as Expected | Inspect the applicable pressure-control system, transducer connection, wiring and related control components. | Follow the specified diagnostic procedure before ordering parts. |
| Intermittent Pressure-Control Operation | With power safely isolated, inspect connectors, wiring and related electrical connections for damage or looseness. | Verify whether the issue is the transducer, connection or another control component. |
| Fluid Leak Near Transducer | Relieve pressure before inspecting the fluid connection, fitting, sealing components and adjacent surfaces. | Identify the exact leaking component from the assembly diagram. |
| Sprayer Does Not Build Expected Pressure | Inspect the piston pump, suction system, filters, fluid path and pressure-control system according to troubleshooting guidance. | Do not replace the transducer unless diagnosis indicates it requires service. |
Transducer, Piston Pump or Drive Assembly?
EP2105 Transducer Assembly
Use this section for the transducer and related components specifically identified in the EP2105 Transducer Assembly diagram.
EP2105 Piston Pump
Use the piston-pump section when pressure problems are traced to pump valves, packings, seals or other internal pump components.
View EP2105 Piston Pump Parts →EP2105 Drive Assembly
Use the Drive Assembly section when diagnosis points to gears, bearings, shafts, housings or other mechanical drive components.
View EP2105 Drive Assembly Parts →Verify EP2105 Transducer Assembly Compatibility
Do not select a pressure transducer simply because its appearance or connector looks similar. Transducers used on different sprayer models can differ in application, electrical connection, pressure-system configuration or mounting arrangement.
Confirm the EP2105 model, applicable Transducer Assembly diagram, numbered callout, component description, required quantity and exact replacement part number before ordering.
Before Buying Titan EP2105 Transducer Parts
Verify the complete sprayer model before selecting pressure-control components.
Determine whether the problem originates in the transducer, pump, fluid system or another control component.
Locate the required component in the EP2105 Transducer Assembly exploded illustration.
Match the numbered diagram callout to the corresponding parts-list entry.
Confirm the exact replacement part number and required quantity before ordering.
Shop Related Titan EP2105 Parts
Move between the EP2105 assembly sections to identify the correct pressure-sensing, drive, pump, suction, main assembly or stand component.
Relieve Pressure Before Servicing the EP2105 Transducer
Shut down the sprayer and disconnect or isolate the electrical power source before service. Because the transducer interfaces with the pressurized fluid system, perform the manufacturer's complete pressure-relief procedure before loosening, removing or servicing the transducer or related fluid components. Follow the applicable EP2105 service instructions during diagnosis, removal and installation.
Shop Titan EP2105 Transducer Assembly Parts
Use the EP2105 Transducer Assembly exploded diagram to identify the component you need, match its callout to the parts list and verify the exact replacement part number before ordering.
Shop EP2105 Transducer PartsTitan EP2105 Transducer Assembly Parts FAQ
What does the Titan EP2105 transducer do?
The transducer forms part of the sprayer's pressure-sensing system and provides pressure-related input used by the applicable control system during operation.
How do I find the correct EP2105 transducer part?
Use the EP2105 Transducer Assembly exploded diagram, locate the required component and match its numbered callout to the corresponding part number in the parts list.
Does unstable pressure mean the EP2105 transducer has failed?
Not necessarily. Pump wear, fluid restrictions, electrical connections, control components and other system conditions can also affect pressure behavior. Diagnose the complete system before replacing the transducer.
What should I inspect around the EP2105 transducer?
Inspect the applicable electrical connector, wiring, fluid connection, sealing components, mounting hardware and related control-system components according to the service procedure.
Can I remove the transducer while the EP2105 is pressurized?
No. Shut down the sprayer, isolate electrical power and complete the manufacturer's pressure-relief procedure before loosening or removing pressure-side components.
Can I use a transducer from another Titan EP or EPX sprayer?
Do not assume interchangeability. Verify the exact replacement part number and documented model application before using a transducer listed for another sprayer.
What should I verify before ordering EP2105 transducer parts?
Confirm the EP2105 model, correct Transducer Assembly diagram, numbered callout, component description, exact replacement part number and required quantity.
Need Help Finding an EP2105 Transducer Part?
Have your EP2105 model information, serial number when available, existing part number and exploded-diagram callout ready to help identify the correct transducer or related replacement component.
Parts & Fitment Help: 713-931-0006